Great setup, thanks for including us in your journey, I hope you reap great returns. Just looking at the site cut and wondering if it's worth marking up 'lanes' to work in (a bit like chaining) as long as the spray paint used is 'lead free' so as to be detector friendly.
Loving your video content and the detailed explanations you give. I must say, with all that big iron you have on the job the addition of a very small mini excavator to quickly pull out the slugs of clay soil with the blue dots would definitely save your backs. Digging in clay by hand should be reserved for those that deserve criminal punishment, lol.
The clay is a pain in the arse . If we scrape with a small excavator we will throw more out . As you’ll see in next video where we only take off 20 mm and get another 40 targets . All small . The plan is to get to the deeper ground for nice slugs . Time will tell
There would be a lot of fine stuff in there . The panning would take to much time as it’s all in the red clay that has to be broken up . If I use a small tromell to process the mines dept would not take kindly to that as .no water is the way we have to go otherwise they want settling ponds and stuff . It become to expensive bond wise
Thank you for another great video!I have 12x8 evo had heard that NF was coming with coils for modded machines is the 12x7 you have available or something not out yet to the public.I know NF been crazy busy.Great video thanks again!Cheers
Do you have to reinstate the land for the land owner if digging a deep pit etc? I have a nox 900. Found my first bit of gold last week, 3 grams. I was stoked. Cheers for the videos mate 👍
Another great Video, thanks Maurice. I have 3 machines, 2 backhoes and a 14t excavator that are coming out of contract and looking at trying to obtain a lease in Victoria. There seams to be very little information on the process to do this in Victoria, any chance you could go into a little more detail on just what is involved. I was the bloke that was trying to contact you on your last video
I find it harder to pinpoint when all the targets are in clumps of clay and have to be broken up . Also when the targets are so close together sometimes you have to go at a different angle to seperate the targets . Some are 3 or 4 targets in a square foot . All tiny
Fantastic video Maurice. Best of luck with the lease. I'll look forward to watching the next one.
Thanks
Great setup, thanks for including us in your journey, I hope you reap great returns.
Just looking at the site cut and wondering if it's worth marking up 'lanes' to work in (a bit like chaining) as long as the spray paint used is 'lead free' so as to be detector friendly.
The paint we used is used on building sites
Loving your video content and the detailed explanations you give. I must say, with all that big iron you have on the job the addition of a very small mini excavator to quickly pull out the slugs of clay soil with the blue dots would definitely save your backs. Digging in clay by hand should be reserved for those that deserve criminal punishment, lol.
The clay is a pain in the arse . If we scrape with a small excavator we will throw more out . As you’ll see in next video where we only take off 20 mm and get another 40 targets . All small . The plan is to get to the deeper ground for nice slugs . Time will tell
Awesome Maurice always good to find lots of Gold. Change up your Coils too as I've found the Coiltek Coil finds Gold that the Nuggetfinder Coil misses
Thanks for the info
Will be interesting to see what is in the deeper ground along that run, goodluck with it all!!!!
Fingers crossed!
Nice work mate good start to the lease
Thanks 👍
Where there lots of dots you should take a gold pan full of dirt and pan it out. You mite get a surprise. Be a good video as well
There would be a lot of fine stuff in there . The panning would take to much time as it’s all in the red clay that has to be broken up . If I use a small tromell to process the mines dept would not take kindly to that as .no water is the way we have to go otherwise they want settling ponds and stuff . It become to expensive bond wise
Thank you for another great video!I have 12x8 evo had heard that NF was coming with coils for modded machines is the 12x7 you have available or something not out yet to the public.I know NF been crazy busy.Great video thanks again!Cheers
Yes 12x7 still in testing stages . For small stuff on the mods use 12x8 for now
@@eurekagold Thank you Heard threw the grapevine that there was something coming that was Tops with the mods 👍Cheers
Quick question,Know you go after bigger gold this 12x7 does it stay quiet if you turn frequency to speci ?
Nice work Maurie ,your onto it.
Cheers
Vic Digger Mick
Thanks 👍
GREAT VIDEO, NEW SUB MY FRIEND
Thanks for the sub!
Do you have to reinstate the land for the land owner if digging a deep pit etc? I have a nox 900. Found my first bit of gold last week, 3 grams. I was stoked. Cheers for the videos mate 👍
Maurice,Greetings from Maghera,County Derry,Ireland,Amazing Video,One question ,Does the gold get better the deeper you dig ?
im hoping it does
@@eurekagold Okay you dig I'II do the praying
One hint dig back onto what you have already dug up not forward you may cover up other targets you havent found or marked
Thanks will try to do that
Another great Video, thanks Maurice. I have 3 machines, 2 backhoes and a 14t excavator that are coming out of contract and looking at trying to obtain a lease in Victoria. There seams to be very little information on the process to do this in Victoria, any chance you could go into a little more detail on just what is involved. I was the bloke that was trying to contact you on your last video
No probs I’ll do a video of what’s involved , time and cost and process
If you cant pinpoint those easy targets with an eliptical you need to give up finding an ounce a day
Also pays more than bills
I find it harder to pinpoint when all the targets are in clumps of clay and have to be broken up . Also when the targets are so close together sometimes you have to go at a different angle to seperate the targets . Some are 3 or 4 targets in a square foot . All tiny