Does your Harley Have Blowby? Crank Case Pressure Release System Install!
Вставка
- Опубліковано 23 сер 2024
- Does your Harley Have Blowby? Crank Case Pressure Release System Install! Hi! We got to install a DK Customs vent system on our 2023 Road Glide ST while putting on a brand new @TABPerformance Zombie Breath Air Cleaner. A fun little upgrade while taking care of a sort of chronic problem on the Milwaukee 8 engine.
Zombie Breath! www.tabperform...
Join this channel to get access to perks:
/ @professionalmonkey
#harleydavidson #roadglidest #tabperformance #promonkeynation #roadglide #milwaukee8 #crankcase #diy #biker #motorcycle #streetglide
Tab updated the notes on their website and now include in the part description model years that you need the bracket. Nice work!
D K Customs does indeed make quality parts!
You named iconic tanks! I’m a 20+ years in service tanker! You are now officially my favorite content creator! Cease fire, driver back up!
Wow, thanks!
I am glad you finally put the DK Customs EBS with the catch can on a bike. I have a 2017 RGU and put it on my bike within a week of purchasing the bike new. I believe in the concept of the design. I look forward to your thoughts/ results after the install and actually comparing it to the other breathers you have installed. love your install videos! 🎉🎉
Too funny ! My video tomorrow is the same upgrade! Just installed this yesterday
DK customs has that support bracket on the website, ordered parts straight from them before including an intake and they ask you whether you need that bracket or not. Love all the products that they put out as well.
Not sure if anyone else said this. On Harleys OEM site you may have to change the model of bike to get a part to be listed. I have a 14 Ultra Limited and it only allows for order parts specifically for it. You may have to put in for a Standard instead of ST and part #5 might then be listed.
You are correct. Checked the base road glide model and #5 was listed. Not available on line. Dealer only item and probably would need to be ordered. Cost less than $18.00 before tax.
Yes, the diagrams appear to be somewhat generic covering several models, but only list the parts for the specific model you have selected. If a part number is not listed try choosing a different model. Ask me how I know!
You crack me up about the neighborhood noise 😂
Mr. Monkey, it is because of you, your content and the things you do to motorcycles that keep me going in life. I am blessed to be a member of your channel. Happy and healthy New Year to you and your family.
a truly effective and efficient catchcan is baffled and has an input AND output hose…
that flows back into the breather without the oil vapor and continues to PULL the vapor out of the crankcase.
I put a DK Customs Transformer EBS on my 2015 UL. I originally had the catch can under the air cleaner but ended up running it under the tank and put the catch can above the transmission. My experience has been too much oil causes it to blow out of the catch can and all down the side of the bike hence the relocation
After 57,600 miles I’m getting alittle blow by on my 2018 SGS. I think it’s simply I might have overfilled the oil a little. After my recent 150 mile ride I checked my oil and it’s at full which leads me to believe that I may have overfilled some .Next is air filter inspection. My engine and exhaust is stock ( yes,I know I’m in the minority). This kit looks cool and if I continue to have some blow by it maybe in my future. Really saving my Pennie’s for a Wilber’s suspension.
The first thing I did for my 2000 Screamin Eagle Road Glide was to get rid of those two lines entering into the air cleaner backplate, my mechanical brain was searching for something to make a catch can? I found an old touch up spray gun that was no longer needed and adapted that can with cap,( holds approximately 8 ounces), and it works great!
Use crimp clamps, they look way better than worm gear clamps. I made my own kit up and love it! DK catch can and fitting but made the hose out of fiber reinforced hose.
You asked if you need to do the catch can on the CVO - on my road glide, after installing the fueling vented dipstick, I found I was still getting some oil in the air intake. So, I would check the intake after a few hundred miles and consider the catch can if needed.
I drilled and tapped my trans cover, got some tubing and a breather filter and a one way check, work good.
Did my Fat Boy like this and will install on my new SGS as well.........soooo much money saved!
pretty sure that there are 4 allen bolts holding the throttle body/manifold to the front and rear head so it won't fall off, but you definitely need that bracket for support
Part number for the bracket is 16400046 and is BRACKET, induction module.
Here's the issue with the parts site and not being able to click the part:
The exploded views show all parts for that model line. When you can't click a part, it means it's not available for that bike. Example: I need a lower jiffy stand for my Ultra FLHTK and I want one from the Ultra Low FLHTKL. It shows both jiffy stands, but I can only click on the standard size arm. Switch to FLHTKL and now I can only click on the lowered arm.
Make sure to switch to the bike you want the part from, not the bike you're trying to adapt it to.
Instead of using a “T”, try using a “Y”, it looks better, it flows better, all is pulling down hill, run the main hose down between the front cylinder tappet cover down low & mount the catch can down onto the front floor board bolt with a round hose clamp, then you can’t see it at all & if it does overflow it leaks down onto the ground not on the top of the cam cover or the exhaust pipe, just my suggestion, that’s how mine is
I did mine a bit differently, no doubt a little extra work. I routed a tube to my transmission cover, put a fitting there to drain any oil back into my oil tank. Then made a channel in part of the lid over to the area that already has a vent in the lid. If that makes sense? A bit extra work, but eliminates the need of a catch can or a filter etc. Haven’t had any issues since install over a year ago
great video, i have the same breather setup and i routed hoses into a T, then one hose over the TB under the tank, route on the upper left side of the engine, down to the right frame rail, with a filter at the end. works well and hidden
i did the trask transmission top cover plus the horsepower inc. breather bolt kit. i could not be happier. zero blow by out of the breather bolts and the trask filter is clean and i have it 4"-5" from the plate, so i can see it. great vid's and you are a crack up. the tank/trash truck made me laugh.
I installed an external breather on both my Sportster Nightster 1200 and 2022 Heritage Classic 114
I found oil coagulated in external tubes running into the catch can . Found it after 4 weeks of use.. feel like blockage isn't good . Easy to check . Cut tube in half .
My font cylinder blows oil real bad. I believe it’s a bad head breather. I’ve installed a vented dip stick, trans cover and still got a lot of oil in the filter. So I finally installed a catch can. 😎
the harley part number for the bracket is 16400049 and is 17.09 on their website . I think you could not find was because you were looking up parts an ST or CVO which these bikes do not from the factory but a regular in my case an flhtk does have .
Damn. Thanks! I had actually looked up a road glide standard.
Made my own for 25$,small filter and some hose couple clamps modified existing vents…easy peasy
I installed one of those DK customs catch cans on my 2014 Ultra Limited. I ran the hose from each breather bolt to a t fitting, then I ran a hose from the t fitting in between the cylinders to the left side of the bike and hung the catch can next to the horn.
My 19 or 22 special never had the backend plate, the back plate on the intake normally is the support with the gasket, been 10k with no issues but did get rid of that plastic junk of a throttle body, but if alot of blow by exist normally has bad rings, don't ask how I know this, but love these videos
love the look and Tab
I like dk customs stuff
I got lots of condensation in the can. VERRRRRY little actual of that milky shit.
I put that zombie breath A/C mounted on the DK transformer back plate. Only thing is couldn’t get the little velocity stack due to the bolts not long enough.
*the logo on there is new .. along with that partnership with DK.
Damn.. I’m always too early to the party
Another fantastic video as usual. The twists and turns and O shit moments we've all had. I had the same preposterous expression when swapping the HD High flow off my 17 Streetglide to a V&H VO2 air cleaner as I couldn't find that damn OEM bracket.
I need one of these zombie breath air cleaner and catch can kits for my Road Glide ST.
I was going to comment on the last video about the oil. You verified what I was thinking when you said you added the 2 quarts. Harley except Dyna and Touring that have a oil tank above the pump, if it's been sitting, never add oil until you run the engine or pull the plugs and crank it for a bit. The oil more than likely is in the sump, and if you fill the tank like you said, and then run it, it'll be way over full and have no choice but to puke it out, and or blow the dipstick and puke it out the tank that way.
I’m not sure just yet. I’m hoping it’s just puking, love and learn, right!
That's almost what I said. I pull hose off back of carb and put it in a quart bottle. Crank engine over and it will puke till sump is dry again. Then service tank and reconnect the hose.
I took my S&S air filers same you had on off my bikes as well and installed these, I truly like them. I just sent them to get powder coated (Window and breather stack) to match the green and orange of my bikes, going to look awesome when done.
We had a saying on the team when I was in the military “1 is none 2 is 1”
On the shovels we had a small breather hose that blew out from the bottom of the bike.
I am a retired GM Mechanic. I have 2 Sportsters. One is high mileage and it is getting more blow by the rings and I was getting a little oil in the air cleaner. I took the rocker boxes off and they have a screen in the breather area. It had a large mesh. I put a SS finer mesh screen in and the oil stopped.
The screen is a diffuser. The oil will collect on it and drip back in the engine. I have been running catch cans on my cars for ever. I just replaced the head gaskets on my van with 220 thousand miles.
There was zero carbon on the intake valves and very little carbon on the pistons. Also the EGR system was not fouled up.
My 1999 TC88 has the same breather bypass except it goes down between the motor/primary open to the ground, barely leaves a watery mark on the ground runs fine.
Tried a cheap knock off and was not happy. I ordered the DK system. . .It's SO much better. Swapped to black hose clamps and have been pleased with form, fit, function, and looks.
Hey great stuff this year. I have been interested in someone that makes that blow by kit. I could not find the DK kit on the Tab site?
Anyhow, good content.
Happy almost New Year!
Just joined membership. Love the channel and all been here for a few years now.
Hey big man,
Been away for a few. But wanted to wish mama monkey and you a very happy, safe, & healthy new year . Great vidio as always. Thanks!
Love the sound of thar bike. So clean and tight. Not sure if this has been asked before, if so, sorry,
Do you do your own paint & body work, all you bikes are dam beautifull. Great choise of colors anyway. Thanks for your time. Happy New Year to everone out there, Be safe yall!.👍✌️🤘☠️
Hey bud! The bodies are all Advanblack, the parts come painted in stock colors or custom, whatever your preference. No body work skills here!
I have the same pipes and took the baffles out, man they sound INCREDIBLE. Just remove the two bolts with a security torxs and you can remove it.
HAPPY NEW YEAR !!! 🎉
Dude, how about showing the CVO some love and put her back together and…..wash her for christ sake!
Love the channel.
Good idea
If you check the OEM and it’s not I. That year check another version or the standard model bike instead of a special or CVO.
Make sure you cover the hole on the top with a bolt, you will have to tap it and screw it in so there is no oil flowing thru there.
When you order it from tab they tap it and include a set screw.
They did not do that to mines...good to know, thank you PM @@ProfessionalMonkey
Just got a set of the Allen's sockets from Amazon. It was a great price and got my co worker two sets too
Man I wish I could ride. I hate living in Michigan in the winter
Call DJ they know the part # for the bracket.
I run the DK Customs Transformer and Fueling vented dip stick on my 114 FLHTP. No oil blow by in my engine !!!
so i have a 14 103 twin cam. You mean to tell me on a modern harley I still need a "puke can"? Huh. Makes sense.
Cool video and awesome product... i have an ST 2023 and am interested in this product, on the link in the description it takes me to Tab but for the filter only, did i missunderstand that we can order this hole assembly directly from Tab? the link showes the filter without the ring adapter or can or DK parts.
Keep upp the videos :)
Hail from Sweden :)
The link IS ONLY FOR THE FILTER AND HOUSING...I'D love to put that Breather on the Blue Mule... but not without the DK Oil breather vent
Damn, I just noticed that.
I might be ahead of them with the video. Here is a link to the DK kit only. www.dkcustomproducts.com/premium-discrete-breather-system-twin-cam-touring-softail-dyna-dk-pr-dis-brt-tc.htm
If you buy them separately all you have to do is plug the Tab breather hole in the plate
@@ProfessionalMonkey $600 separately... Hey, FYI... Get a "WORKING BCM" and keep it in your Gee rodge for just in case...
2017 and newer dont have a Starter relay... The "BCM" (Body Control Module) feeds the Solenoid... SUCKS when that goes out (Im in Murphy NC closest shop is 2hrs away ) and Mine went out... I made a jump wire to get me to HD (WHEN it gets warmer)
What would set that air bather off if you put a battery light inside it would make it Look cool at night.
Have you done any adjusting of the steering head bearings yet? Can't find the the cinch bolt on the upper yoke? any suggestions? Keep up the good videos! Happy New Year!! 2017 FLTRXS
Not yet
Okay Thanks..@@ProfessionalMonkey
I wonder if I could figure out how to adapt something like this for an older carbed bike.
Anything can be done if you're dedicated!
Squeeze clamps i liked better put a see thru gas line fiter with a one way check valve to a catch can so i can see the amount of puke coming out before the catch can just idea works great
I really love your advanblack monkey seat I definitely consider buying it because I’m short holding up a 900 lb bike so I need a lower seat but the one on there website is different it’s not as low as yours. Very disappointing honestly. Great video
I dont see a breather on that can.. 😮 Where is the positive crankcase pressure going to go?
TJ, doesnt come with the oil breather... and I can't find it on Beatrice's site
I want to put a breather on my 131 but worried about the warranty police.
I made my own, cost me 25 dollars for the parts. I wasn’t paying what these companies wanted for a catch can system.
Man they should have make it in carbon fiber that would have looked sweet with the rest of the bike.
Love ya man but you killed the horse. The horse is dead. 😂
Do they sell the air intake and the catch can and the banjo bolts as one kit because I can’t find it on their website do you have a special promo with that by any chance?
Does the link to breather have blow by kit in it?
Hope this is not out of line but why don’t you get a tripod to hold the camera/phone so we can watch you work,just saying
All m8s drip oil of the air cleaner
I didn't hide my catch can either mine hanging between the tappet covers
Your OEM parts tips failed again man. I need a derby cover gasket 2010 103 ultra limited it says dealership only. What the actual crap!?!
Happy new year monkey!!! See you in 2024!!!🎉🎉
Great video as always. Have you ever thought about wrapping the pipes?
@JasonBucy
Why???
The pipe wrap looks hideous!!!
Why would you want to cover stainless steel with fugly pipe wrap???
One good well thought out reason and I don’t need to see, “to keep the heat in the pipes”!!!
In my opinion, you want to get the heat out of the pipes and away from your legs and feet(except in winter when temperatures are cold)!!!
@@AzzKicker-bz1cb agree to disagree, I personally think the stainless looks unfinished. The wrap reminds me of the bad ass hot rods of the 50s and 60s.
How much do you want for the Dyna?
I like
I have a 09 elektra standard Ill trade for the dyna??
Merlin.
what's going on with the shovelhead/
It’s in storage. I’m gonna get it out here in a few weeks.
👍👍👍
I don't want to come across as an idiot, but why not mount the catch can under the fuel tank so that most of the oil drains back into the engine instead of in a catch can. Just seems to me you would never have to drain the can, because it would flow back into the engine.
Mr. Monkey Does it come with Rain Sock ?
All Harley’s have blow-by. The question is how much.
What handle bars do you have on your ST?
La choppers thresher 14
my eyes glazed over watching this
Ask UA-cam for a refund.
HAHAHA @@ProfessionalMonkey
what ever happened to gold member
👍🖖
🤯
You’re gonna wanna move that can
U may get some shit on your rear header, etc
@6:45 WTF man, Where's the F-ING LINK...???...lol (-:
Mr monkey u gotta do what all these other youtubers do no offense!!! But u should reach out to companies and get sponsored so they flip the bill on the parts u do the labor. I know u a good dude and don't want to ask people but let's face it these are million dollar companies that already give free crap to a bunch of youtubers that don't do jack for anyone!!! I could nake a few but I won't we all k own who they are they hook up there friends at most no free things to subs even if they do once a year what's that?? We as a community woukd love it and I speak for everyone I'm sure when I say u should reach out so your channel grows and u can do some crazy shit on bikes and possibly do give aways and things like that!!!!
Nobody wants another giveaway channel
Really looks like an unfinished part. Horrible design. Ugly!
So I would recommend you not buy one. Ever heard of just keeping your mouth shut?
The OEM Harley breather bolts pair nicely with a S&S Stealth air cleaner. From there, you can run two lengths of hose down to a Y shaped barb fitting with a length of hose and a can attached. I did this with my 2016 RG and used a generic aluminum master cylinder I bought off Amazon as the catch can.
I did basically the same thing with my stealth air cleaner on my 22 road glide, just reuse the stock breather bolts and some cheap rubber lines from Napa right down to the ground no need for a catch can