Recently got the same go kart for my kids. Had my 14 yr old son put a new engine and torque converter on and the love it. Nice job on yours inspired me to do more with my sons
I know this is kinda old but next time you could always use a billet adjustable motor mount plate, typically used on mini bikes, for the motor placement. They are a little pricey but worth every penny!
That's a loaded question, how much do you want to spend? The more money more and better options. If you only have a couple hundred for a complete setup you are headed to harbor freight!
@@crabtreemedia8169 how'd it go with the welding? My uncle let me borrow a Chicago Electric Flux 125 and an Arksen 100 amp (yeah right 🙄) AC stick welder. Honestly I'm digging the stick program even though I can only push 3/32 6013. 6011 blows through no matter what I do. I'm personally going to upgrade to a 110/220 Amico Pro 200 DC 100-250 volt unit so I can use 1/8 7018 and get more accurate welds.
@@fatbuddycat thats awesome man. I bought the titanium 125 and have welded with it quite a few times and I love it. I'm planning on learning stick next, which means I'll have to buy another machine, which will probably be another titanium branded machine.
@@crabtreemedia8169 I would have bought into a Titanium stick but the only welder HF had was a Titanium 200 Stick but it was 220 only, I want 110/220 so I can use it anywhere.
I think that one had a GX270. Sadly i don't have it anymore, one of those sales i regretted as soon as it was gone. Other than the governor taken off no other mods.
What color red is that? I’m going to sand and paint my go kart tomorrow and I want that color red. I’ve already painted my pedals. Tie rods, spindles, and brake and gas rods black. I just need to know what color that is
I have a Manco Intruder GFX with a GX270, I would love to put an electric start on it. What's the link for the wiring? Been trying to find a reliable one for a while now, with no luck. Thanks! Great build!
Where can I get one like that for me and my 9yr son to ride around in. Some of these new ones are way to expensive and a little to fast for youngsters.
@@-DIYPRO- thanks for getting back with me don't mean to bother you do I have to have a honda motor because I bought a new predator motor from harbor freight if I have to get a Honda motor what size do I need
@@ahmondeboxley2950 those are pretty similar to the Hondas, you just need to get the one that is similar in size. For example you probably bought the 212cc and matches the Honda gx200. There are a couple videos on yt showing them put on a predator.
The parts and shipping is what gets me. BMI is better priced on some parts and GoPoweSports kills you on shipping. So i shop mostly between 3 stores for parts. Tires and rims on ebay.
Do you have something against $25 circular sanders at Walmart with whatever grit you need? I for real worry about y’all getting tendinitis on this paint. I just finished painting a Manco a couple days ago, I get it.
The best clear coat that you can use is the "OH MY" 2k clear from BuyCustomPaint.com . Easy to spray, no cutting or buffing required ... if you watch THE LAST 5 mins of this video ua-cam.com/video/XwBl53nql4I/v-deo.html you will see how great this clear is... its definitely worth checking out...
I'll have to do another video of another one with more details. The electric starts aren't too bad if you delt with small engines before. You just have to get the right parts.
I don't know why but they took the link down. Do you already have one? Something to try is just emailing companies that sale them see if one have a good write up on it.
All that painting with no primer... All that wasted time.. All that paint will chip right off. If you're going to take the time to do something, might as well do it right brother. Nice build though.
I just happen to have one of these .
Right on, thanks!
I think the rear suspension needs to be loosened a tad... front looks great!
شو هذا شكله غريب
Recently got the same go kart for my kids. Had my 14 yr old son put a new engine and torque converter on and the love it. Nice job on yours inspired me to do more with my sons
Nice, I wish I had the resources when I was younger to do that.
That’s bad ass! I want build on of these for my niece, I need to learn how to weld though
no you don't
I know this is kinda old but next time you could always use a billet adjustable motor mount plate, typically used on mini bikes, for the motor placement. They are a little pricey but worth every penny!
I'll try that next time.
Awesome job what we call a poor mans side by side
haha, yes indeed.
Good job man thinking of building one from scratch
Thanks!
Good job looks great...doing a yerf dog spiderbox right now...might have to steal your color scheme!
Copy away!
Me along with other people with a sense of humor
“It’s a convertible”
Yes indeed.
"Rats Nest of wires" (shows 3 wires). Lol.
Tiene los manuales de su cart. Me gusta mucho ese modelo amigo. (,Perú) desde mi país
Beautiful job love it
Thank you! Cheers!
Great build/revival. I'm about to start welding, or at least attempt and learn by experience, any tips on the best welder for beginners?
That's a loaded question, how much do you want to spend? The more money more and better options. If you only have a couple hundred for a complete setup you are headed to harbor freight!
@@-DIYPRO- Yep! That was my plan haha harbor freight seems like the way to go for me, hopefully it works. Thanks
@@crabtreemedia8169 how'd it go with the welding? My uncle let me borrow a Chicago Electric Flux 125 and an Arksen 100 amp (yeah right 🙄) AC stick welder. Honestly I'm digging the stick program even though I can only push 3/32 6013. 6011 blows through no matter what I do. I'm personally going to upgrade to a 110/220 Amico Pro 200 DC 100-250 volt unit so I can use 1/8 7018 and get more accurate welds.
@@fatbuddycat thats awesome man. I bought the titanium 125 and have welded with it quite a few times and I love it. I'm planning on learning stick next, which means I'll have to buy another machine, which will probably be another titanium branded machine.
@@crabtreemedia8169 I would have bought into a Titanium stick but the only welder HF had was a Titanium 200 Stick but it was 220 only, I want 110/220 so I can use it anywhere.
You did a very good job on it!
Where did you get the frame? I have an engine and want to know where to get the other parts for it.
Just from my local classified ads.
That's where I get all me stuff
man where did you get the turn key system for the electric start? im restoring my gokart and I want it be just like this. TURN KEY GO
Ebay!
Love the build. Great work. Was wondering which gx motor you're running and what mods, if any. Thanks
I think that one had a GX270. Sadly i don't have it anymore, one of those sales i regretted as soon as it was gone. Other than the governor taken off no other mods.
@@-DIYPRO- Thank you for the quick update.
Buenas tendrás el croquis del chasis en PDF para que me lo envíes . Está muy bonito. Perú
The little kid tho! I love him
What color red is that? I’m going to sand and paint my go kart tomorrow and I want that color red. I’ve already painted my pedals. Tie rods, spindles, and brake and gas rods black. I just need to know what color that is
Sorry I don't know the exact color but I think it was like a cherry red or fire engine red, or was a rattle can from Walmart.
I have a Manco Intruder GFX with a GX270, I would love to put an electric start on it. What's the link for the wiring? Been trying to find a reliable one for a while now, with no luck. Thanks! Great build!
Sorry I can't find my download anymore. I helped a friend do one not to long ago and he got a cheap one off Ebay and it came with instructions.
Do you know what kind of yard dog that is cause I have one like that and wondering what model it is
Yerf dog 3203.
I would love to know how you did the wiring!
I had done another video of just the wiring and of course it gone and then I made the stupid mistake of selling the kart, next time I will.
Mech Master id love to know how you put a electric starter on the kart
Very nice job well done sir
Thank you kindly
What sand paper grit did you use to remove old paint
I think it was around 60 or 80.
How did you extend the electric start cord for you to be able to have the key switch by the wheel?
Just got some longer wire and ran it back to the starter.
@@-DIYPRO- where u get the kit for that
What kind/size rims and tires do you have on it ? Where can I get them ??
I can't remember the sizes but I pick stuff up from ebay and bmi karts, if you have time look and wait for deals that pop up on local classified ads.
What exact go cart did you use ? I’m trying to buy one and fix it just like you. Nice video.
It is a Yerf Dog. I think the model is 3203.
Alright and i watch the video about the electric start. But how did you get it to be on the inside of the kart ?
@@rastafariclee7185 I extended the wires so I could put the box where ever I wanted.
Anjing
I want to try to blue my yerf dog axle and see if it works
Did u have to buy any parts. If so from where ?
Lights, torque converter, little odds and ends. Mostly from ebay or amazon.
Where can I get one like that for me and my 9yr son to ride around in. Some of these new ones are way to expensive and a little to fast for youngsters.
local classified ads.
Mantap bang... saya juga lagi bikin go kart..🙏😊
i was thinking the same thing!
ಜೈ ಹಿಂದ್ ಜೈ ಕರ್ನಾಟಕ ಮಂಡ್ಯ ಹುಲಿ
I was thinking the same thing!
Future fellow kart nut at 1:12? 😂😂🤘
Where do you buy an add on electric start??
What is the little piece that holds the throttle cable called
The thingy majiggy or whatchamacallit? I'd just call it a throttle bracket.
where can i find an Yerf Dog two seater of road go kart frame like this?
I find them all in local classified ads. The good deals go quick, usually have to jump on them quickly.
@@-DIYPRO- thank you! if you found any local classifieds ads in miami let me know! thx
I'll let you know if I find one!
@@-DIYPRO- thank you!
Bad ass!!!!
Thanks!
32.4 might. Fast ngl
Sure thing!
Tendrás el plano de ese cart por favor y enviármelo. Gracias
I didn't make it from scratch so I don't have plans, sorry.
Ni hablo inglés porque soy peruano. Usaré el traductor Google. Un momento
I already translated it. I mean I buy the chassis ?.
@@-DIYPRO- número de Wasap ?
@@-DIYPRO- me gustaría saber cuánto te costó el motor
aaaaawww so cool máster builder 👍👍👍👍👍
Nice video how did you get it to crank by key or did you by a kit I luv yhe video I have one that I gonna restore
It was a kit just like this:
amzn.to/3KfEuET
They sell them for all different size engines.
@@-DIYPRO- thanks for getting back with me don't mean to bother you do I have to have a honda motor because I bought a new predator motor from harbor freight if I have to get a Honda motor what size do I need
@@ahmondeboxley2950 those are pretty similar to the Hondas, you just need to get the one that is similar in size. For example you probably bought the 212cc and matches the Honda gx200. There are a couple videos on yt showing them put on a predator.
I have a go kart that I need help with how much will you charge
How much would you charge me too help me build my old frame back
why you didnt swap engine with gears :(
Money!
Ahtchgbbb fnnnsv
Fantastic
Thanks!
What type of axle is that all I need is an axle
Where you buy the electric start
I done a resto on one just like that last year. I broke even when ibsold it. $600.00
I may keep this one for a little while, I'm in it about $450.
@@-DIYPRO- it dont take long. All my builds start at $500.00. And go up.
The parts and shipping is what gets me. BMI is better priced on some parts and GoPoweSports kills you on shipping. So i shop mostly between 3 stores for parts. Tires and rims on ebay.
wheres good place to buy steering part's for this
Best place is to search used karts on local classified ads. If you need something in a rush than ebay, amazon, or bmi karts
Do you have something against $25 circular sanders at Walmart with whatever grit you need? I for real worry about y’all getting tendinitis on this paint. I just finished painting a Manco a couple days ago, I get it.
I'll pick one up for the next one.
👏👏👏
What color red did u use?
Cuanto dinero le metiste al carro ?
The best clear coat that you can use is the "OH MY" 2k clear from BuyCustomPaint.com . Easy to spray, no cutting or buffing required ... if you watch THE LAST 5 mins of this video ua-cam.com/video/XwBl53nql4I/v-deo.html you will see how great this clear is... its definitely worth checking out...
Please send a link on wiring
Updated the description. I put a link to another video of a guy showing how to wire it up.
So please send the link of his video
Here it is.
ua-cam.com/video/nUM6tHILPG4/v-deo.html
It's also in the description.
Thanks
@Mechmeaster what's your belt size
I'm not sure, I sold it awhile ago. It was a sad day.
How'd you add electric start
I'll have to do another video of another one with more details. The electric starts aren't too bad if you delt with small engines before. You just have to get the right parts.
THE ENGINE IS GOVERNED?
Statement and a question?
Now put sub woofers in it
That's a great idea!
Where did u find the frame
Local classified ads.
@@-DIYPRO- LOL
I want a link plz
I don't know why but they took the link down. Do you already have one? Something to try is just emailing companies that sale them see if one have a good write up on it.
Yerf dog?
Yes, i believe the model is #3203.
Man U need to primer your stuff before you paint it so it dosent chip
It was a paint plus primer!
What it's price bro
Sad thing is I sold it last year. Ended up getting another fixer upper frame.
Can i buy this go kart
Where do you buy the wheels
Ebay, amazon, or the best is old karts on the classified ads.
why did you make a beautiful buggy but put a ugly seat on it
I agree but That's the same seats they come with. I did switch out another with some razor seats which looked pretty sweet.
Keren 👍👍👍👍👍😎
👍👍👍👍👍👍👍❤️❤️❤️❤️❤️❤️🇮🇩🤝
Right on!
Dad level 110
Thanks man!
👍👍sim ok
Oie pode fl comigo no zapp
MICHELTTFFDSAKKKJR
I was thinking the same thing!
All that painting with no primer... All that wasted time.. All that paint will chip right off. If you're going to take the time to do something, might as well do it right brother. Nice build though.
Unless you used the 2 in 1 paint plus primer!
Your iq is 2000