Great glass finish ! I like the Devilbiss because of that and less overspray too. I can see what I am spraying too & less paint ..That guy can really spray ..Great channel too !!!
Your videos really help give me the knowledge and confidence to be able to do this myself. And they are fun to watch to boot! Thanks for the upload as always.
Almost wish the car was primer grey. Would look fantastic. Nice job. I've noticed a lot of guys don't have air spraying even without paint flowing. That was the first tip I learned years ago. Blows away debris before you get to that spot
un trabajo excelente y una difuminacion increible donde queda el color y el barniz roto limpio y estirado trabajo de un profesional un saludo desde Colombia
HI Guys, I would have put the first coat of colour on before removing the temporary masking to reduce the film build on the door and fender, i asume he painted the back edge of the hood off camera, good job guys
@@PaintSociety With that transparent blue, if sealer was blended into the door major can worms. With blended panels masked off, apply two coats of color. Then start blend. This will allow less color at edge of blended panels and with solvent base they're still room for tinting color if need be. Even though this is water
I did collision repair/Refinishing for 40 years and taught it at a public technical school for 6. Do yourself a favor and invest in a portable fresh air system. I can almost guarantee that you'll suffer from COPD (Chronic obstructive pulmonary disease) later in life. I used one, but it was too late for me. I stated out with a standard respirator in the beginning of eurethane paints. I can feel my ability to breath slipping away, not fun being out of breath all the time. And no, I'm not smoker. I hounded my students about it, and recommended the only stay in the trade a maximum of 15 years. Those isocyanates are killers, along with all the other toxic chemicals related to that industry.
How much paint to i need to paint a 1985 regal 2 door with 1/4 vinyl top im just painting the out side no door jams or inside trunk or hood just outside. How many quarts do i need or gallons im going with house of kolor candy apple red
Hello I am a channel subscriber I love automotive painting I am not a professional in the field, I have a curiosity, what is the pressure of paint flow and what is the nozzle measurement used for such a perfect finish
And one more question do you polish after a painting like this? I don't know how it works there in America, I'm Brazilian and I live in the interior of São Paulo
..Aaaannnd, stop the clock..!! ..and the 1st prize for the fastest respray EVER goes to the man in the grey suit, and although very good, it could be incredabily good if just a tad slower..!!
@@Refinishnetwork thank you I've been looking for a good reusable suit. I like the design. Keep up the good work and thanks for the videos been lots of help.
No offense but sealer coat was still wet before base coat and they didn't tack cloth or clean it so they just painted into any possible bits of dirt in the air into the paint
Love the blend into the existing paint job. Its flawless and looks beautiful.
one of the best painters I've seen on youtube,he never wastes motion,seen very few men who could handle a gun better,you in the gray suit,take a bow
strattuner it is.my.job.l.rove.you
Years of spraying I love my trade.
I've been doing this for 37 year & still doing it
You have talent dude, thanks for sharing.
Good skills and good spray gun.
This blue is perfect 💙 I've been looking for this color 😍
I thinking is b593m code color
Very good finish. This is one very good painter. Very consistent and methodical.
Great glass finish ! I like the Devilbiss because of that and less overspray too. I can see what I am spraying too & less paint ..That guy can really spray ..Great channel too !!!
Your videos really help give me the knowledge and confidence to be able to do this myself. And they are fun to watch to boot! Thanks for the upload as always.
Covering blend panels to spray sealer 👍leave paper on and put 2 coats of color then start your blend especially on transparent colors 👌
Almost wish the car was primer grey. Would look fantastic. Nice job. I've noticed a lot of guys don't have air spraying even without paint flowing. That was the first tip I learned years ago. Blows away debris before you get to that spot
Nice i can see on the second coat he go nice and easy to get that wet finish good job
What's the colar code
It that fuji blue
un trabajo excelente y una difuminacion increible donde queda el color y el barniz roto limpio y estirado trabajo de un profesional un saludo desde Colombia
Good. Job
prof work, well done
Many thanks!
Fantastic video how come you don't get any over spray in the air
Nice 👍 job please let me know why you sprayed gray colour before base coat thanks
The grey color is the sealer primer. It is to give a uniform surface to spray over.
Also for adhesion purposes
Hi can you please tell me the exact shade of blue I need this one..good job
Fantastic economy of movement/gun control 👍
HI Guys, I would have put the first coat of colour on before removing the temporary masking to reduce the film build on the door and fender, i asume he painted the back edge of the hood off camera, good job guys
i agree or blend the sealer into the door to help with the color match, blue is so transparent.
0
@@PaintSociety
With that transparent blue, if sealer was blended into the door major can worms. With blended panels masked off, apply two coats of color. Then start blend. This will allow less color at edge of blended panels and with solvent base they're still room for tinting color if need be. Even though this is water
hows that you never used a blend additive what spray gun did you used to put the base coat paint on and clear coat paint and what fluid size tip 😊
Good blue color
Awesome wrok! Love the paint suit!!!
สีสวยมากครับ ช่างมีฝีมือที่ไม่ธรรมดา
ใช่ครับ
แตกต่างจากอู่แถวๆบ้านเลยครับ
ใช่ครับ งานเขาสะอาดทุกขันตอนจริงๆ สีเลยสวยมาก
Wow 😳 like your technique.!!
Sorry & thanks I'm from Jordan. My question, is there need to spray a color between the gray primer and the finishing blue.
Sometimes I like to get at least one coat of base before I take the paper off
good job
Hi mate! What color code is it ?
More 💙Blue💙, my favourite color 💙Blue💙 i cannot deny my favourite color, 💙Blue💙
Very nice,like it, brother pl use eye glass
what paint is first coat?primer?
love this color
Great job! I love it 😀🤗🤩😍👍❤😊😃
nice work
Bravo...solo che nella smacchatura della base la pressione era troppo alta e quindi non risulta omogenea....cmq. bravo
I did collision repair/Refinishing for 40 years and taught it at a public technical school for 6. Do yourself a favor and invest in a portable fresh air system. I can almost guarantee that you'll suffer from COPD (Chronic obstructive pulmonary disease) later in life. I used one, but it was too late for me. I stated out with a standard respirator in the beginning of eurethane paints. I can feel my ability to breath slipping away, not fun being out of breath all the time. And no, I'm not smoker. I hounded my students about it, and recommended the only stay in the trade a maximum of 15 years. Those isocyanates are killers, along with all the other toxic chemicals related to that industry.
Why you not put the primer on to the edge of the blend panels
Bro have you done the primer the paint and the clear coat on the same day??
How much paint to i need to paint a 1985 regal 2 door with 1/4 vinyl top im just painting the out side no door jams or inside trunk or hood just outside. How many quarts do i need or gallons im going with house of kolor candy apple red
งานฝีมือล้วนๆๆๆสวยครับ
Nice color. exelent job.👍👍
BUEN TRABAJO
Cool paint job!what painting booth do you use? Thanks,take care
Good works 👍
I wouldve used either blue or a dark colored sealer, not as many coats trying to cover it and not as much see through out in the sun
What tip did u use for the gun
Good work💼
Very good
Good job man!
Hello I am a channel subscriber I love automotive painting I am not a professional in the field, I have a curiosity, what is the pressure of paint flow and what is the nozzle measurement used for such a perfect finish
Congratutions
well done bro!!!
And one more question do you polish after a painting like this? I don't know how it works there in America, I'm Brazilian and I live in the interior of São Paulo
Congratulations. Excellent finish job.
Great! Kudos.
Very Good job
Disculpa conque medida de grano se hacienta la pintura
GREAT JOB, what clearcoat is this?
На переход красил дверь и крыло но столька красок израсходовал лучшы бы целиком без крышы покрасил бы?
Very nice top gun
What clear coat and paint you use?
Great work, which Gun are you using?
@3:10 he says so
Wonderful 👍
Hermoso trabajo *
What kind of paint did you used?
Do you ever get paint drips???????
How wide do you have the fan open on your spray gun
Any code for the paint?
Good job liked it very this vídeo!
Hola se ve interesante el video saludos desde Peru
What’s this color code
Sorry I don’t recall
Damn! You should protect your eyes too
Good
ficou top de mais
killed it! nice job
What is the ink and varnish brand?
..Aaaannnd, stop the clock..!! ..and the 1st prize for the fastest respray EVER goes to the man in the grey suit, and although very good, it could be incredabily good if just a tad slower..!!
Lovely 👍👍👍
Blending area
I work in dyeing in the aircraft parts company in Morocc
Am from indonesia very nice i like
Bom trabalho
Bonito color. 👌
Can you teach me how to paint
what code is that blue
What company make your paintsuit
Those are only available from @Motivatedpainters
@@Refinishnetwork thank you I've been looking for a good reusable suit. I like the design. Keep up the good work and thanks for the videos been lots of help.
Magnífico.
No offense but sealer coat was still wet before base coat and they didn't tack cloth or clean it so they just painted into any possible bits of dirt in the air into the paint
And thers supposed to be a flash time between coats wet base on wet sealer doesn't give hardener time to do what it's supposed to do
I haven’t watched this in a long time. Why do you think the sealer is wet? It’s usually given 20 mins flash.
Не важно откуда растут руки, лишь бы они были золотыми :)
How much pressure do you use for the varnish ?
Varnish is for wood. He's probably using 20-30psi
this guy knows what he was doing, no need wet bed.
If i tryed to spray clear like that I'd have runs everywhere.
Is that enamel paint?
No it's water base.
Sealer was the first layer, next few are colour waterbase and final are clearcoat
Good... I Like
What is the name of this gum
The best.
Supper
I eat dinner too!
Não é mais prático tirar o capô fora ?..Faco SEMPRE isso ...! Abraços de Guimarães , Portugal ...
Eae mano trabalho no ramo e tenho proposta pra ir pra portugal pode mim dizer como está o mercado ai nesta área de pintura desde já agradeço
No under-hood or fender bolt coats?
acquacow what insurance company pays for that?
The same insurance company that pays to mix paint twice to do cut ins and then paint the out side.
What pressure you have in the color with sagola?