How to Replace Front Brakes 2011-2017 Honda Odyssey

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APB...
This video shows you how to install front brake pads and rotors on your 2011-2017 Honda Odyssey. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2011 Honda Odyssey
2012 Honda Odyssey
2013 Honda Odyssey
2014 Honda Odyssey
2015 Honda Odyssey
2016 Honda Odyssey
2017 Honda Odyssey
Tools you will need:
• Pry Bar 1aau.to/oHW/1AX...
• 14mm Socket 1aau.to/oa2L/1A...
• 19mm Socket 1aau.to/oZV/1AX...
• 22mm Socket 1aau.to/okL/1AX...
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oV/1AXA...
• Brake Caliper Hanger 1aau.to/ogq/1AX...
• Ratchet 1aau.to/obeu/1A...
• Socket Extensions 1aau.to/oa2L/1A...
• Torque Wrench 1aau.to/oaks/1A...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/owK/1AX...
• Copper Anti-Seize
• Gloves 1aau.to/ox5/1AX...
• Safety Glasses 1aau.to/osn/1AX...
• Floor Jack 1aau.to/oPs/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/opK/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@thomasmorelock5699]

don't forget to remove the cap from the brake reservoir before compressing the caliper, or you'll pop a line. Don't ask me how I know this...

[@garypritchard9787]

Excellent demo! TRQ has the best how to videos!

[@ART224]

Are you sure the caliper bolt torque is 27 ft-lbs? The Honda specs seem to say 37 ft-lbs.

[@GoodWillLee]

When you are greasing the pins, do you use recommend any type of grease? I have seen some people use silicone lubricant, it seems like you use anti-seize. Any difference ?

[@Dan.Parker]

This channel is honestly the best.

[@TRQ]

[e-mail] Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@bobbGSP]

Thanks for helping to map out the job

[@whowhatwhy91]

How many ugga duggas is 120ft/lbs?

[@doncaba7117]

I absolutely have enjoyed and used the information from your content. I can't thank you enough. How do you know you are torquing to the correct ppsi? Do you have a special wrench? Please share.

[@TRQ]

+Don Caba Torque Wrench.

[@JHZR2]

This is great but aren’t the pins supposed to get silicone? Grease will swell the boots. Also, aren’t caliper bracket bolts single use and/or requiring loctite?

[@jacobnorthey6246]

What are the best brakes to get? And where?

[@tu_mekegaming1958]

Does the same steps apply for the doing the back rotors as well?

[@TRQ]

+@tu_mekegaming1958 Here's the how-to video you're looking for: ua-cam.com/video/lN-evEkY7vE/v-deo.html

[@samsno3667]

do you need screw to hold rotors in? It looks like you didn't replace the one that broke off ...

[@ESPPsycho]

Harbor Freight representn!

[@Surry918]

No bleeding of brakes?

[@laneburgess1643]

Another Great video.

[@dillonalexander6689]

👏🏿👏🏿👏🏿👍🏾