Infiniti G35 Self Diagnostic for Check Engine Light
Вставка
- Опубліковано 11 лют 2025
- I show you how to put your G35 into self diagnostic mode to see whats throwing the check engine or service engine soon light. Verified to work also on early 2000 model Sentras and a host of other Nissans and Infinitis.
4:29 Perfect, thank you!
Yeah, I have to ABSOLUTELY AGREE, 10 Minutes is waaaaay to long to get the 1-2 minutes of pertinent information.
It worked I got error code 0335 for my 04 coupe, which is the crankshaft position senor, it all started when i was racing a e46 m3 my buddys car, i was in 3rd on tiptronic getting up to 4k rpm and the rpms dropped to 0. I panicked put it back to drive and tried to drive it still drove.( I thought i stalled) After that we got to a gas station to fill up and my car never started again, not until a hour later with a jump. Then 2 days later my engine stalled as i was parking, thats when my check engine light went on. I did the procedures you recommended and it works thanks a lot I will probably make my first you tube video showing how to replace the sensor since it seems so easy from the diy guides
I had 0462 and it was gas indicator not reading correctly :D thanks for the lesson
Its been a year from this comment, my car is throwing same code. What was it that you did to fix it?
Your accent is LEGENDARY
4:30 start, you're welcome
Thanks, this helped me get the codes off my Infiniti.
Yes it work, appreciate help my life.
Outstanding, your video was a huge help; I got the same code as the reader in autozone, I replace both camshaft position sensor today, don't know why they put it such a odd location, but I got it done. I also clear the code just now, when I take my G35 to work tomorrow, I will see if the code comes back. I do know, there is one sensor the crankshaft, I may have to replace it also, tomorrow will tell. Thanks David.
Great Info man! Appreciate it! Never knew that about my G.
My G35 2007 Coupe only brinked 7 times than 1 time...didn't blink a 3 time set of flashes...nor a 4th set of flashes...any suggestions?
Thanks for the information, about to go try it now.
Driving on the freeway and the "slip ,VDC, and check engine soon" light came on. Felt like the car turned off but it didn't. Luckily I was able to get off the freeway without causing an accident. Drove it home at like 5 mph. I had my foot all the way down on the gas and it would not go any faster than 5 mhp. Any suggestions?
Sabrina De La Rosa had the same issue. It was the camshaft position sensor bank A for me.
Hi Sabrina..I have same problem and was wondering what you ended up doing. Was it expense to fix?
I'm dealing with the same problem on my '06 G35 Infinity right now. What was the cause and fix for you?
could b number of things. car is going into limp mode. mine has done it from overheating issues and from alternator and fusible link problems. u can disconnect and reconnect negative battery cable 2 get it out of limp mode. but youll still have to find out why it happened in first place. pain in the ass. i have an 06 also
Thanks for the info. Well done.
This worked on my last 2003 infiniti sedan but it's not working on my 2003 g35 coupe.... Any idea why?
WemSum don't press pedal so fast while doing this. If you rapidly press that pedal it won't registers. Found this out the hard way.
TAKE WAYYYY TOO LONG TO GET TO THE POINT !!!!!
be happy I got to the point and saved people from taking a trip to the dealer or part store. ungrateful turd
I am TOTALLY grateful that you shared this valuable info! Thank you very much!
I did the procedure on my g35 but got strange readout - 2 blinks, 11 blinks, 10 blinks, 3 blinks - don't know how to interpret the 11 blinks part, any advices?
No. the max number of blinks should be 10 which is a 0.
No. the max number of blinks should be 10 which is a 0.
I got this too lol
What does the 5 blinks mean?
Wassup chief... I was wondering if you knew the steps to this for a 2k7 m35x with the push start... if so can you please help me out. My light just came on literally today. Ill be doing my own research as well if I find it before you respond ill let you know.
Hey Boodedoo I'm sorry I'm just seeing your comment. I haven't check to see if this procedure is available on newer Nissan models with the push button start. I'll look to see if I can find something on it and test it out in my Q50.
That is a Service Engine Soon light and NOT a Check Engine Light, right?
That is the "check engine" light on Infiniti/Nissan's.
will this work for an air bag light? i’m trying to put it in self diagnose for the bag
What happens if the check engine stops showing up after you do this
Is that good or bad?
Hey bro i got 5 flashes what does that mean and it stood solid
SLEEP STER i got the same
@@servandogarcia5904 what is sleep ster
Hi there same thing happened to me, think I'm going to go to Advance Auto
Jacqueline the good thing about Advance Auto is that they can tell you more precisely what is wrong, what needs to be replaced etc. They aren't as good as a repair shop but can point you in the right direction.
The funny thing is my mechanic took the part out and cleaned it and put it back in the car, its been running fine every sense
Jacqueline Jackson Thats good. Do you know what part it was that he cleaned? Was it the O2 sensor?
Ironically, the mechanic took the part out and cleaned it and put the same part back into the car. Its been 2weeks and the car is running fine and no check engine light so I am assuming that it has been repaired That part cost $245.......Jesus Christ
the part was that Bank 1 part.......for the camshaft
@ruwkus812indiana its a shame AutoZone has people working there that don't know the difference between the different lights. please let me know what code you're getting.
Sorry for the late response. The code in my 05 sedan ended up being 0430, something in the catalyst system apparently. My heat shield makes a little rattle noise, unrelated im sure. Right when the service engine soon light first came on I was driving on the highway behind a semi truck under extremely heavy rain. I thought maybe I have an exhaust leak or some way a little water got in there. I did clear the code about 1000 miles ago and it hasn't came back yet. So I guess im going to chalk it up until it returns. If or when that day comes I suppose I will look into the EGR or a sensor. I guess it could be the converter but time will tell. Car runs great at 145k miles, add a quart of oil every 2000 miles. Maybe the oil consumption is throwing the emissions off somehow.
Check engine light came on while driving on freeway and car shut down. Cant get error codes. Starts but goes off. Any suggestions?
@del Gonzalez were you able to get it in diagnostic mode?
No I was not. Tried multiple times and nothing.
Check the Alternator.
Check with DVM on wires to Alternator. Hope you know how to use DVM.
Sand those posts & contacts very good.
Less than 3 ohms on Battery's Negative (black cable) to Alternator's Negative.
Same for the Positive (red cable).
Get battery check & test for CCW.
Then look for Camshaft Position Sensor.
DIY if you could because dealer wants $2K.
Better pray you valve covers are good.
Can you get a code for the AT light?
No this procedure is only for the check engine light, not sure if the AT light will flash indicating a specific code/issue. How's your transmission fluid?
@@illustriouslaz thanks for the reply. And I been checking it seems pretty low I just added a quart earlier today. The light is still on. I might have to add more. We’ll see
Say brother would you know what 0113 would be that’s what I got from trying this out
Did you ever have an issue with the manual mode?
Do you mean manual mode of the transmission?
Tom Ma yea, every time I move it to manual mode, it says nothing but “D” and rarely goes back into it again, sometimes when it does work, you upshift then goes from “1m” to “D”, trust me I did everything other then change the tcu, which I’m about to do soon but just curious if you ever had that problem and fixed the issue before?
@@shafty3047 sorry I dont have any experience with the manual mode as mine was a 6 speed manual but is it just the cluster display thats not registering that you're in manual mode or does the transmission not shift when you manually shift it?
Tom Ma well I’ve been asking around a lot today, and now that you’ve mentioned the cluster gauge, I’m starting to think that’s the problem, but I’m confused on how the cluster I supposed to be the problem, I know that it could be the fix because I’ve seen it for two other but why would that fix it? Isn’t it just a display? I thought it was Shifter->Tcu(Manual Mode) but I’m finding that it’s connected like Shifter->Cluster->Tcu(Manual Mode) and the cluster could be that problem?
Tom Ma sorry if it’s a bit confusing basically what I’m saying is the cluster broken to where it would block manual mode from working and if so, isn’t it just a display or am I wrong and theyre all connected?
What year it this model?
My G35 is a 2006 but I learned to do this on my 2002 Sentra
A 2004 panel is not the same.
At nightmare working on these crappy cars.
They built them like American cars from 2003 on up.
$4,500+ when needing Spark Plugs & Valve Covers at many shops.
Now, my friend said her car is getting P0300, P0303 & P03006, after 6 months.
With the help of ATG staff.
They loaned me a ATG AK1 boresope (medical grade) for free.
I used it to insert down the Spark Plug Tubes.
Piston Rings are worn.
Let me know how it goes Jourdan
Can I do it for my g37
There might be a procedure with Nissans with push button start but this procedure is limited to cars with keys. Not sure if the same steps transfer over but if you try and it works let us know
Is that coolant light supposed to stay lit up?
are you referring to the light over the temp gauge? If so thats the light for the tire pressure monitor
Stephen Ma the temperature light in between hot and cold?
Yea thats normal. The only lights that are on that indicates a problem are the check engine light and the TPS light.
What about 2gear
worked fine for me, thx got code 0021 ..anyone know what that is?
+Jam Jos Camshaft?
When you held it down for the last ten seconds did that just reset the obd 2 codes??
Yes. That clears the codes out but they will come back unless you fix the problem. How long they stay off for depends but I cleared my code months ago and it hasn't come back yet.
what if it just blinks 5 times?
Adrian Ibarra i got that too
Mine did that too, after a battery change. OBD scanner showed a P0603, Which can be triggered after a battery disconnection. Clear the error and the light has stayed off.
not work for me on 2003 skyline
This guy got a 420;)
Google your numbers and you shall find your troubles
what's that light all the way to the left
Tire pressure monitor light.
+illustriouslaz so it's nothing bad right?
+Jose Vasquez not really, I think a tire shop busted one of my sensors so my light is always on but if you see that check your air pressure in your tires
Mine did not cleared.
That's not a CEL. that's the airbag censor which has a tendency to go bad in infinitis. I have had to reset mine 6 or 7 times in the last year.
What's not a CEL?
only sayed on after battery change
Stephen Purkess mine too, did yours clear?
U from b-more?
rocco rostagno yes sir. West side. How can you tell?
Let me know how it goes @jourdan
take too long man. shorten this
Nah
I it. But it says there is no error. The light its still on. What can i do?
didnt work for me . Found out thou at Firestone it was a cam sensor. 336 dollar fix
Rockauto...WAY CHEAPER
3:00
Two cats 🐱🐱
This does not work at all on my G35 Infiniti 2003
it's not push button start is it?
No.
+Mitchell Arnott not sure why it's not working. I know for a fact it works on 2003 Nissan so it should work for Infiniti of that year as well. just try a few more times as even I don't get the timing down sometimes
No thanks man tightened the gas tank hopefully that was it. Don't trust enuf online to redo something I think I already did right
Chell Flame 3 years later, I have a 2003 infinity g35 and I’m going through the same problem!! But the question is, did your car continue working properly? Cause I like to speed so I feel like it popped up for some else rather than the gas tank
Po455
Po1078
Way too much talking.
Just buy a scanner
Why spend money when you dont have to? Nowadays I would just recommend going to autozone or the like and have them scan it for free
illustriouslaz if you get a scanner you wont have to do all that guessing...besides with all the millage you have already you will be using it more often...guaranteed...they are only like 40 or 60 bucks...and with an expensive car like that you really don't wanna be guessing...i'm big on diy but tools do help.
Desnt works!
What car are you trying to do it on?
Let me know how it goes @jourdan