VW Park Assist Control Module Eeprom Error Repair
Вставка
- Опубліковано 8 вер 2024
- This video has been made for informational and educational purposes only.
Try it at your own risk.
VW Park Assist Control Module Eeprom Error Repair.
The memory of the parking aid module is corrupted and the system is not working.
The error code is 16347 control module - eeprom error 014 Defective.
This can be fixed by writing non corrupted software to the module.
I founded the original software of this ECU on specialized auto forums.
After all this is done you need to make sure the coding is correct.
Thanks for watching!
nice and easy as it looks... could it be possible for you to make detail vedio..
1. Tools - link for online purchase
2. firware - auto forum
or if you can do for us...
thank you for the video
Hello. For the tools I can’t provide you any links because I can’t guarantee that is the best quality and price but I can give the tools names and you need to search them yourself.
For diagnosis I use VCDS and for programming I use VVDI Prog.
About the firmware you need to search by the module’s part number eeprom and flash or you can get them from a working module but with the same part number.
Hope to be useful for you.
Lo que hace es reescribir los datos nuevos leídos de otra ecu que funciona.No tiene nada complicado
Thanks! Good video! What interface and software did you use?
VVDI Prog and Vcds
Bonjour suite a un défaut sur le parkhilfe PLA 8PO 919 475 E, je suis a la recherche d eeprom sain pour flasher le module, avez des connaissances sur le sujet ou toutes autres façons de réaliser cela? Merci...
how did you removed the storage box? (25 s in your video )
Hello Daniel. I didn't find the the original software of this ECU. Can you share it, please ?
I have a Vw touran , 2011
Some time it’s only beep sound for few secs then stop and button flashing .
Now sometime I get it work then graphic comes and sensor works but then again stop .
What this could be
You need to scan the car with a diagnostic tool.
Which one will be perfect for this
I have the same problem but for the ECU with the code 1k5919475
I've already run several forums, could you give me a link to access the file.
Hello. Very good your video. I have this problem with my car. could you email me the file. Grateful for the attention.
Just do a search and you will find it on the forums
what are these wires? can it be reflashed by obdeleven?
You need a programmer to reflash. I use for this vvdi prog
pff cosmonautic price, just found that can be done with my OBD11
Where do you got connecting schem for wire ? thank you :)
From VVDI Prog
@@e.daniel does VVDI cover most of VW / audi ECU to flash / recover them ?
Are you still doing these repairs?
@@lewisthundercatcampbell5601 yes
I have a 2007 Touareg v10 TDI with an EEPROM error on the rear lid module. Part number on VCDS is 7L6 959 107B. Would you be able to fix it or recommend anyone who can?
@@lewisthundercatcampbell5601 You can try to rewrite the software with a good one or you can replace the module.
@@e.daniel I don't have the software or hardware to do that. Do you fix these for people? Could I ship it to you? or do you know someone who does fix these?
Something open circuit it was saying
Error code is 107A1600h
107A1400h with snap on
Autel error is :
B107A14
Check the wiring at the parking sensors
@@e.daniel thanks will do
Am aceeași problema mă poți ajuta
How do I write all this using an ch341a eeprom programmer?
You can’t. You need 9S12 programmer
@@e.daniel Thank very much. I've been swapping wires on the chip and managed to get the programmer to read but reads only an empty file.
I'll go buy a 9s12 programmer.
Thank you very much.
😑 thanks but i will not do anything 😄.
I have no ideea what 'phisical problems' cayse this error, so far everything works well