mk6 Golf cluster enable needle sweep (staging) via EEPROM programming
Вставка
- Опубліковано 1 жов 2024
- If you have questions on how to (de)solder/program the EEPROM, this video is not for you! I am not responsible if you brick or damage your cluster in any way.
This method may or may not work for you! VW have many vendors who make clusters that look very similar physically but have completely different controller and memory mapping internally. So it is an absolute requirement for you to save the EEPROM before modifying! You need to have an original backup in case your memory mapping is different and so you can revert it back to original!
This video is just showing you how i managed to enable needle sweep (staging) in my 2012 GTI cluster using EEPROM dump and reprogram. In my case it is actually possible to do this mod via VCDS (and i do have the genuine cable), but i just wanted to see if I can do it the basic way :).
Mine is a VDO cluster (5K6 920 973 C) for your reference.
Thanks for watching.
Awesome video! As asked below i would like to know where you get your eeprom knowledge, how to know which byte is responsible for what and etc. Also does that CH341A programmer software is compatible only with that programer you have or is it universal? Cheers, Marius
Hello dear ! thanks for nice information but how did you come to know that value of 66 needs to be changed ?
Thank you for video.Passed 4 year, you install black holder of display flex connector crooked.I hope you fix it later.
hi, in the meantime, thank you really, finally they succeeded thanks to you to activate this function that otherwise was impossible for me. In my case, however, the needles light up only after returning to their place, can you help me? Sorry for the Google translator english
Thanks for the video, I will like to know what device did you use to bench test the cluster? Thanks in advance. I really need to know this procedure.
Hi mate been playing with eeprom and my speed dial just with ignition on is showing 120mph and as I drive the needle is dropping as the speed picks up can you please help thanks
I hope u can help me
I have a Volkswagen car and my trannsmisson was broken and put a new one in. But my old transmisson get over wire speed of the car .new one dont have this how can i get signal of wheel speed abs to my odometer ?
New generation of my car is already get signal over abs..
I have found some information over VDO dash . If i can change 0x33 from 21 to 31 hope this problem get done .
Thanks! Unfortunately I have one of those non-VCDS programmable clusters. I guess I'll actually go the desolder way.. :D
See this cable, great option...SAVE time and CLEAN repairing...No IC remove is needed
ua-cam.com/video/9zslsTAab0o/v-deo.html
Amazing!! You are a genius!! How the hell did you figure this out? Does the MK5 cluster have the same e-prom?? I'd love to have this on my mk5
No. The MK5 does NOT have the same EEPROM. The MK5 has the 24C32 while the MK6 has the 24C64. I'm looking for the option to do it in the MK5 myself.
eM any news?I look for info but still nothing.
24c32 and 24c64 are the same byte and same bit. It should work on both clusters.
See this cable, great option...SAVE time and CLEAN repairing...No IC remove is needed
ua-cam.com/video/9zslsTAab0o/v-deo.html
Hi mate, can you clone an 24c64 eeprom from a cluster into another? Please make me a quotation in PM thank a lot. BTW awesome job!
Yes, a clone of the EEPROM is possible as shown in the video for creating the BIN file, but it would also include the immobilizer information as well.
Great video! How do you know which adress to change tho?
Same doubt
@@matta7857 same here!
Bardzo dziękuję za film i instrukcję. To rzeczywiście działa! Profesjonalizm w każdym calu !!!
I don't have enaugh words to say how much I hate VW now... Bought vcds for some small coding and adaptations, now I have to do all of these for fuc**ng nedle sweep...
@AllAboutCars How do I change the odometer units from km to miles on Volkswagen up 2012? Please
Hi my car e34 520i. Cluster low type and eeprom 24c02. I want needle sweep. I have eeprom programmer. Please help me
Добрый день! Вы уверены что ее надо выпаивать? В W169 and W245 можно делать так - ua-cam.com/video/RGPaQ7LjwLo/v-deo.html
Ilike that you clean off the old flux and alcohol off the board. I have been a tech for many many yearsd. Thank you for the nice video.
Someone said old flux may become conductive, not sure if it's true or not.
How can i do this with honda accord 2007 and 2009
I just bought my self a 2010 Jetta 2.5 sat for four years so I had to fix a few things on it but got it all done but I noticed my rpm was not working so I went and got a used cloister and didn’t know I had to get it reprogrammed so I put my old one back now I have the ABS/BRAKE/STEERING WHEEL AND TRACTION CONTROL LIGHTS ON they are blinking but it didn’t do it before until I try to swap cloister anyone has any ideas how to get it fix car runs great but is annoying cause when I drive that’s all I can see lol any help is appreciated thnx
Is it possible to do this with the vagtacho cable, without tearing the cluster down and solder??
How can I get login\pin from 24c64 dump?
Couldn't you just use the 8 pin clip rather than desoldering the chip?
Probably but then while writing anything can happen, you can loose info in the length of cables or even if you move for a bit, rather not risk it and just solder it so theres no probability
Is it possible to do this on other clusters, for example Honda Civic Type R EP3 (2002 to 2006).
Wish I knew the location address for this in the beetle series. And also would be sweet to know where the radio code is located in the panel. There is supposed to be data sent to radio to automatically unlock after battery cable distribution as long as it’s stock radio.
Great job👍
need your help.please tell power supply and igntion pins for cluster on the table .
Thanks
How can I get login\pin from 24c64 dump?
To add oil temperature into MFD, isit same chip? And do you know which code to look at? And what to change it to?
Which pins should I connect to place the instrument panel working on a bench?
i usually buy an eeprom 24c16w or 24c16wp eeprons are like flashdrive depending on it each has different storage space size m..I switch to eeprom because that particular programming block may be defective and not keeping the programmed data may not keep the programming inside Eeprom typical recording defective
thanks for sharing, can the temperature and fuel pointers also be done this job?
I have same type Golf ^cluster whitout staging. Only it is not VDO cluster, but a Magneti cluster MM5
Is this for that cluster the same procedure?
Regards.
Alle
@allaboutcars How can I get login\pin from 24c64 dump?
awesome. I didnt realize there was such an easy method to remove the chip.
hı need yamaha x max 250 2015 year dashboard dump eeprom 93c66
Same hardware, but different (updated) software needed to do the dump
Hello, I managed to do it on my e Jetta mk6 2012 here in Brazil, but the pointer does not turn on the light at the time of the Scan...
Hello i buy one launch control dox to ld performance to seat ibiza 6l 1.4 2003 and the car dont start with this box magnetti marelli ecu you know something you have see something else like that
Hi. 24c32 eepron Which is the byte?
This sounds like a MK5 Golf cluster. We are in the same boat.
It’s working. But needles don t lighting when they’re sweeping. Do you know which is the bit that enable lights while sweeping? On 2E0 x 06 the value is 09. Thank you!
I have the same issue as you. Did you find a way to make the needles light up?
@Daniel G did you find ?
FORTE (CERATO) HYBRID : 940031Q000 (94003-1Q000) شرح مخارج الفبشة او توصيل datasheet How to connect the plug
Hi, this program can I read , copy and write another cluster? For Audi A3 8PA year 2009
Are those little white things the led to cluster malfunction lights ? Deff desoldering a couple of so
I have an Audi A3 8P 2012 TDI, I ve tried de VCDS and option is not there. Do you think it has the same chip as the one you shower here? Thanks
What is that make cluster power on?
Will this work on golf 5 or b6 pasat
Hi
Great work but I have eeprom 24c32 can you help me? Thanks
How can we get to know that it is the 6-6 byte address?for other cars it will change right?help me on it .....pls
Good
Hello!
Did this mod on my mk6 GTI. Needle sweep works but needle and cluster lights are turned off during ”needle sweep”
Does anything else need to be changed in bin file?
Hello Benhar, you did you manage to insert the lights in the pointers?
hello, is there a possibility i can destroy my cluster by programing it same way (i mean by changing the exact same hex)? cuz my cluster has different part number and its from my VW Passat B7 2011. BTW I WANT TO THAKS A LOT FOR THIS PRO LOOKING TUTORIAL
Once you created the backup BIN file, you can't damage anything (just restore the BIN file if it doesn't work). I advise against desoldering the chip, and simply clip it to the programmer instead. There is no risk of anything going wrong.
@@MatthewTaylor3 Is it possible that reading with clip is damaged?
@@RosiekM once the EEPROM is read, there is a checksum option to do a verification that the file that was saved is the actual one on the EEPROM to be sure.
Thanks for this tutorial, I made this change to a dashboard 7N0920870E works perfectly needle sweep but I still have a problem what to change so that when the needles rotate to have light?
Thanks !
Hello, I'm also having the same problem, did you manage to insert light in the pointers?
@@ruanmenezes3711 Yes, I did it.
@@mikevasilescu8721can you please tell me how?
Hello is that possible in mk5
how do for have needles are illuminated during staging ?
Thanks :)
My friend what pin use for turn on the cluster with power supply or battery
I disconect my cluster on mk5 2007 2.5l and connect but car wont start ,please help
When are (de)solder mean and where I get right apron? My english are bad so you spell APRON no correct the bye way.
Will that usb programmer work on 95640 eproms from SRS unit?
Hello, I want to ask if is the same procedure for passat b7, 1.6 tdi
Please this is very valuable information but video clarity was not good one more time please clearly explain
See this cable, great option...SAVE time and CLEAN repairing...No IC remove is needed
ua-cam.com/video/9zslsTAab0o/v-deo.html
A small word of warning, you risk damaging the chip by desoldering, soldering it to wires and then removing the wires and resoldering it back to the cluster. The safer option is to get a lead with a spring loaded clip to clip onto the chip while it is still soldered to the cluster.
Others may not be so lucky as you.
True for the damage but not safer for the cluster cause you have a higher risk of reading corrupt data with the eepri on the board
For polo 6R 1.2 tsi change same bit?
Great.
Hy that's a good video thank you.
What is the cercuit tester full name please?
CH341A
Hi 😉
Is it possible to find out the immobilizer login/pin code using this method? (VW Scirocco 2011)
Hi, did you manage to get login\pin from 24c64 dump?
hello could you help me, I have a passat b6 and I changed the frame for a more modern one, but now instead of leaving the handbrake icon, it comes out of a blown bulb!
Hi
Thanks for video.
One question; can you help me with this cluster power connection for on test with external source?
Thanks
Good job
nice video mate, can i clone my eeprom from the original ecu to an donator ecu with this usb reader?
No, immodata are encrypted
hi!how to connect it on tyble for test it on bech?please
connection schema would help me.thx.nice video
how do you know what the adresses do ?
thats same thing i was thinking
Same here ☺️ I also want to know which byte to edit? I have a Honda Fit
i like your job what your doing how to program cluster meter i want to know clearly step by step procedure
hello where can i get this software
ʼnice vid on how to disassemble the instrument needle
Nice! 2014 Lexus ES300h how can I enable it?
How do you know what address controls the feature?
is that mechanical sound normal while the needle moves?
Damn you did a great job 💪
Like and subscribe from me 💯🤗
Hi tank you lot of
Please how kan for immo off ?
Good Diy. Can you tell me where i can find the pinout info to connect the 12 volts?
Hey 😊 great video.
I just want to know that how you know you needed to edit 66 byte or how can I know which byte I need to edit?
would this work on my 2009 golf gti
Motorcycle Digital Meter Reading Open Down on any device
what pins you connect on test bench ... cluster pinouts ?? thx
good job but how did you know the value to change in the main memory
I mean how do you know the exact adresse in your video you say : the adress : 00000060 and the column : 6 ?
and can we do the same thing if i use vag eeprom programmer + diagnostic cable
thanks for your future response !
What is different?
please help me change the km and disable my panel key code .... vdo vw 24c32 ....
Can I do it in VW T5 FL 2012 CFCA?
Can I do it for 2005 passat B5 ??
Hi,but this procedure it's possible also for Touran Premium cluster?
Hy for Audi A6 C6 from 2005 and Touran from 2008 is the same ? i can do`it?
How do I program a 2011 Jetta
What is the best car mileage adjustment device?
Hello sir
Merci mohandis
you have program ref 5K0920 870F
THANKS TO YOU I HAVE MANAGED TO ARRIVE THE FULL SCALE OF THE HANDS OF MY GOLF 6 TSI 1.4 OF 2011👌
Great vid!
I'm sure you've been asked a million times, but have you done any soldering work with a VW MIB 2 radio (CP REMOVAL)?
And when the radio’s EEPROM chip has been saved which byte contains the security information, VIN# info, etc.? That would be a huuuge time saver if you knew this (or where I can find info on it)
To remove the needles on a 2016 gti mk7 is it the same way ?
can any tell me the programmer which supports mb91f60
Hi boss
Can you tell me the type of LED bulb to use for the cluster?
Some of them are not operational anymore in mine.
Thanks.
I can only say SMD or some sort of COBB or Cree bulbs.
For these bulbs to ever fail, it means that there is an electrical fault in the circuit like a cracked board, and not the bulb themselves.
Thank you ,awesome
Hi
I managed to activate the staging of the needles but adaptation channel "staging" is disabled in VCDS. how enable it ?
edit EEPROM to make the chanel Avaiable
@@pavolbabjak3936 hi sir
Yes for the needle sweep it's ok but how edit or what valor edit to have channel adaptation active ?
@@pavolbabjak3936 how do for have needles are illuminated during staging ?