That's a big one. Good detail work and paint. I wish sculptors would include the weapons as a separate file so you can print them for display. Like a diorama of weapons on a wall
You my dude are a fkn phenomenal artist, this is sideshow level paint work but amplified! Keep up the amazing work and everyone else should support this talent, his discord is awesome!
well with sealing chrome i havent had much problems with using lacquer, id say it dulls it out like 10% but its not that big a difference specially in smaller areas
Love the video. The work you put in the base is exellent complements the statue perfectly. P.S I do like scary movies but I saw about a minute of one you often talk about in your live streams and it was so horrible I had to switch channels. I think it was called Twilight 😧.
Hey boss, solid job. I know you do these videos out of the kindness of providing back to the community but i was wondering if i can be super bold and make a video request. I am getting ready to print my first LARGE scale model and honestly dont want to mess it up. I was wondering if you had a video or could make one covering a couple points. 1) I have a model that is a known 1/4 scale but i want to scale it up to 1/6 and or the model is already 1/6 scale however, some pieces become too big for my printer, how would you approach that? what are you doing to "slice" your models to fit on your print bed if you dont have a large format resin printer like the mega 8k? personally i have the saturn 3 ultra. 2) how excatly if i have a model and i dont know what the total scale is, would i figure that out? some modelers dont give this detail and there are say 30 pieces to print how do i ensure that i scale all pieces properly to make the model around that 1/6 scale? obviously i could scale all to 150% and call it good, however, would have no clue how big the final piece would then be. 3) obviously, i caught your video about doing the 5% infill however, when you review your models prior to printing are you manually going into the hollowed print and adding any supports to any islands? I did a hollow on my print at 1.8mm then noticed after the 5% infill i had some islands that were present. How would you address that? Sorry for the long comment, didnt know how else to ask the questions but yeah...was super curious if you would do or if you have a video that specifically focus's on those aspects above as i feel personally that is the area i am lacking in confidence before i go and print some of the very large things i want to print. thanks in advance for any help you can provide your content is super awesome and the live streams are fun to be a part of!
So for the selling issues, I would check out Sanix site. They have a scaling tool there you can use. If you're trying to cut models to fit your build plate then check out Meshmixer. It's a free site to use. And for infill issues I use the repair option on chitubox. If I have any islands, which I usually don't, I'll add drain holes during the slicing process.
How do you print a file with two different printers, that have different default build plates and not mess up the scaling? I am so curious, or am I missing something?
Awesome job Henry as usual.
I appreciate that
Great to see you back Henry 👍
Dude. That looks incredible! Congratulations!
Thanks dude!
Awesome work!!!! you are a genius! 👏👏
Thank you! Cheers!
Awesome bro, crazy details from those 8k printers
Awesome paint job🔥 definitely trying out some of these techniques!!
Nice work! Thank you for sharing your weathering tips. I really like the difference the gloss makes on the buckles and eyelets.
Thanks for watching!
Flicking toothbrush bristles will help create some of the same effect instead of using the airbrush :)
That's a big one. Good detail work and paint. I wish sculptors would include the weapons as a separate file so you can print them for display. Like a diorama of weapons on a wall
Love it, found the link thanks
You my dude are a fkn phenomenal artist, this is sideshow level paint work but amplified! Keep up the amazing work and everyone else should support this talent, his discord is awesome!
Much appreciated!
well with sealing chrome i havent had much problems with using lacquer, id say it dulls it out like 10% but its not that big a difference specially in smaller areas
Love the video. The work you put in the base is exellent complements the statue perfectly. P.S I do like scary movies but I saw about a minute of one you often talk about in your live streams and it was so horrible I had to switch channels. I think it was called Twilight 😧.
Twilight is definitely scary to watch. 🤣
Hey boss, solid job. I know you do these videos out of the kindness of providing back to the community but i was wondering if i can be super bold and make a video request. I am getting ready to print my first LARGE scale model and honestly dont want to mess it up. I was wondering if you had a video or could make one covering a couple points.
1) I have a model that is a known 1/4 scale but i want to scale it up to 1/6 and or the model is already 1/6 scale however, some pieces become too big for my printer, how would you approach that? what are you doing to "slice" your models to fit on your print bed if you dont have a large format resin printer like the mega 8k? personally i have the saturn 3 ultra.
2) how excatly if i have a model and i dont know what the total scale is, would i figure that out? some modelers dont give this detail and there are say 30 pieces to print how do i ensure that i scale all pieces properly to make the model around that 1/6 scale? obviously i could scale all to 150% and call it good, however, would have no clue how big the final piece would then be.
3) obviously, i caught your video about doing the 5% infill however, when you review your models prior to printing are you manually going into the hollowed print and adding any supports to any islands? I did a hollow on my print at 1.8mm then noticed after the 5% infill i had some islands that were present. How would you address that?
Sorry for the long comment, didnt know how else to ask the questions but yeah...was super curious if you would do or if you have a video that specifically focus's on those aspects above as i feel personally that is the area i am lacking in confidence before i go and print some of the very large things i want to print. thanks in advance for any help you can provide your content is super awesome and the live streams are fun to be a part of!
So for the selling issues, I would check out Sanix site. They have a scaling tool there you can use. If you're trying to cut models to fit your build plate then check out Meshmixer. It's a free site to use. And for infill issues I use the repair option on chitubox. If I have any islands, which I usually don't, I'll add drain holes during the slicing process.
awsome statue, did you print that hollowed or solid?
It's hollowed. I couldn't imagine the weight of it if it was solid. lol
@@TheCreativeCollector makes sense, what thickness do you recommend for the walls?
I used a 2mm thickness. Not too thick. Just right
@@TheCreativeCollector got it, thanks for sharing! greetings from Sweden ✌
Sir what resin use for your statuete ??thanks
Mainly Sunlu and Resione
You have to drop some bullets on the ground.. good job on everything!
How do you print a file with two different printers, that have different default build plates and not mess up the scaling? I am so curious, or am I missing something?
It's all the same scaling. It's just a matter if the print will fit the build plate or not.
Thank you, Love your channel man. I just got a GK Two and it is incredible@@TheCreativeCollector
I can't find the link for the models??
It's in the description
Were can I perchase this to print
I take it you didn't watch the video. lol
@@TheCreativeCollector To be fair you said the link is in the description but it isn't. lol.
Yes it is. Look again.
@@TheCreativeCollector Really where? All I see is your Amazon affiliate links?
Right under the description of the video. There's a link for Julles. Read the whole description.