Paint Easy to Follow SKIN TONEs with NO AIRBRUSH-- Updated

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ •

  • @crush3095
    @crush3095 10 місяців тому +21

    how come this is the only video that shows the steps like mixing and thinning
    and gives recommendations on ratios..
    greatly appreciate this, I expect a lot of people who watch this will get a LOT of enjoyment out of applying this advice!

  • @NikolasStow
    @NikolasStow Рік тому +22

    Bruh, my jaw dropped after that rose wash. Just started printing with my Elegoo Mars 3, absolutely subscribing.

  • @TwoThreadsAhead
    @TwoThreadsAhead 5 місяців тому +6

    I kid you not, I found this video because I came here looking for face painting tips so I can custom paint a Cable print I just got and it's literally a 1/12 variation of the exact one you're doing lol.
    P.s, You're a legend and this paint came out looking spectacular! Thank you for sharing your expertise with us all.

    • @milliemay2708
      @milliemay2708 4 місяці тому

      I hope you don’t mind me asking but where did you get the print? I’m currently working on a life size wolverine head print but I would like to use this print next

  • @abstractfate6104
    @abstractfate6104 3 місяці тому +1

    A small bit of blue wash on the jaw line would get that realistic look on another level, usually it’s like a 3 level paint of yellow on forehead, red in the middle blue-ish on the jaw line. Was really hoping to see the blue under the 5:00 shadow

  • @WrenchNato
    @WrenchNato Рік тому +9

    This is amazing work. You make it look so easy. I started painting a few months ago and flesh tones and eyes are something I want to start doing.

  • @rlfslfrlf9581
    @rlfslfrlf9581 25 днів тому

    I'm painting a Riker kit & was looking for a vid for skin tones. Was recommended yours. Great video & thanks for the step by step. Easy to incorporate into my kit.

  • @martincerny8106
    @martincerny8106 9 місяців тому

    Ou man, absolutely stunning job. From the beginning i was just about “ hey its not the real skin tone “ but after the rose wash i was just “ ou sh*t thats amazing “. Thanks alot for this amazing tutorial. Definietly need to print tons of heads and start learning. 💪💪 keep doing an amazing job ! Thank you.

  • @LatenightLyle
    @LatenightLyle Рік тому +6

    I would love if you did a new video on painting faces for 32mm tabletop gaming miniatures!
    Some of this translates to the much smaller scale, but I’d love to see how close you can make a tiny face match the scale you often show on here!

  • @pitkind4hardcoresolo
    @pitkind4hardcoresolo 11 місяців тому

    Well thank you, I was interested in mixing paint to get skin colour, and what I got here is mixing skin colour paint that results in skin colour paint. Genius!

  • @sinister___black_toys
    @sinister___black_toys 3 місяці тому

    Thank you SO much for linking the detail brushes!! I’ve been looking for brushes for eyeballs for such a long time!

  • @cgrg69
    @cgrg69 26 днів тому

    Thank you very much for your content as it is some of the best on UA-cam. I would pose a challenge to you, first see if it can be done and second for your education in the challenge. Okay that said, the challenge would be a no airbrush, sculpture using only cheap craft paint and rattle can paint.

  • @John_Sharrock
    @John_Sharrock Рік тому +4

    Beautiful work my friend. A great and easy to follow tutorial 👍

  • @PyramidHeadChris
    @PyramidHeadChris 7 місяців тому

    I did my first face skin tone paint on my Leon Kennedy, and I use this video as a reference. I'll say I naild it😅 Super helpful video! Thank you!

  • @torn.blue.sky101
    @torn.blue.sky101 Рік тому

    Awesome tutorial on how glazes work, actually gave me a refresher....I need to remember patience more 😅

  • @collincutler4992
    @collincutler4992 Рік тому

    This is fkng insane.. you make it look SO easy.

  • @aldaron5792
    @aldaron5792 Рік тому

    You make it look so easy that I want to buy a 3d printer. The only oroble

  • @dkev001
    @dkev001 Рік тому

    I love Tamiya brushes. I use those more than my Sables.

  • @nicholasbazarow4135
    @nicholasbazarow4135 Рік тому

    Love that head sculpt

  • @xavier7899
    @xavier7899 Рік тому

    Man, I wish this would have been around in December when I printed my Stephen King. Nice video.

  • @wadrawanttobeayoutuber3778
    @wadrawanttobeayoutuber3778 Рік тому

    Than you for your vid❤ I'm a beginner for skintone thanks for your guide me
    Respect 🙇🙇

  • @daniphrog
    @daniphrog 11 місяців тому

    GOAT, best tutorial I've seen on this topic

  • @Chimer24-qs5wo
    @Chimer24-qs5wo 3 місяці тому

    Great video and fabulous results. Top tutorial, thank you )O(

  • @Notfritenite
    @Notfritenite Рік тому

    Heck Yea man, you knocked it out of the park, I appreciate the glazing in your skin tones around the eyes and cheeks. Airbrushing all the time gets boring for me.

  • @mrhj626
    @mrhj626 Рік тому

    no idea how much help this is

  • @dr.brunoribeiro
    @dr.brunoribeiro 4 місяці тому

    Thanks!!! Want to start painting heads and you gave great tips!

  • @tuckerlibby
    @tuckerlibby Рік тому +2

    Great job! I've been using a similar mix lately. Vallejo Pale Flesh and Flat Flesh.

  • @jeanmichelcosta1515
    @jeanmichelcosta1515 Рік тому

    looking forward to seeing the progress of the other videos. haha

  • @rapidoodsdoodles
    @rapidoodsdoodles Рік тому +1

    Nice! Really needed this kind of tutorial just starting to learn how to paint using handbrush.

  • @Paulina170393
    @Paulina170393 Рік тому +1

    What a job! Thanks!

  • @lokiwartooth1138
    @lokiwartooth1138 Рік тому

    I’m actually printing this now

  • @darvenung
    @darvenung Рік тому

    Thank you for making these! I've avoided printing models cause of painting skins and eyes. D;

  • @thegtaguy344
    @thegtaguy344 5 місяців тому

    Wow , excellent!

  • @Foxiepawstotti
    @Foxiepawstotti Рік тому

    This is so good, I wish what I was painting was as big as that head but its a JoyToy size and I can barely see it, You can see it when You mess it up though lmao!

  • @Thatguy-uc3dy
    @Thatguy-uc3dy Рік тому +1

    Nice, that video came just in time, the most skin tones I have done was on daredevil mouth or batman etc. , and I have been considering a one punch man project but kept putting on hold because of the face and with this video being so educational I might as well bite the bullet , a great one as always keep up the good work.

  • @centurycountess4949
    @centurycountess4949 4 місяці тому

    I really love your video on the skin tones with no airbrush. I am about to do some repaints from my 1/6 scale figures I was curious if these colors could also be used for a more paler skin tone? would we use more of one color and less of another? and is it possible to see it in a future video? It's much easier for me if I see the process. I've tried following a tutorial that's more verbal without a step by step and just explained with the finished result in the aritist's hand but Ive always found it easier seeing it step by step. and was curious if we could see what paler skin tones would look like.

  • @josue471
    @josue471 8 місяців тому

    😮😮😮😮😮 nice job 👍🏻

  • @noelsantiagomattei5142
    @noelsantiagomattei5142 Рік тому +1

    Great and easy to follow tutorial! Im just recently getting into this hobby and ive already learned so much by watching just 2 of your videos!

  • @peterhepne6298
    @peterhepne6298 Рік тому

    congratulations you are very good

  • @marawanharraz2310
    @marawanharraz2310 Рік тому +2

    Keep up the good work, man! Can you make a video using generic acrylics and mixing your own skin tone from primary colours? , because I don't really have stuff like Vallejo where I live. That would go very well with this video

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      I will definitely look into it. Thanks for the suggestion!

    • @Thatguy-uc3dy
      @Thatguy-uc3dy Рік тому +1

      mix a lot of white with some brown and pink it will get you a basic Caucasian skin tone I have no idea how to get the skin tone of someone like blade but I would imagine adding more brown and less pink, you could try to experiment with yellow and red to get different shades, that is what I do, I experiment a lot, just look for your desired color and how to mix it online and try to achieve the same result, don't be afraid of making mistakes and test your mix on failed prints, (وحظ سعيد يا استاذ مروان)

  • @dazwraps8213
    @dazwraps8213 7 місяців тому

    Best tutorial ever... Thanks

  • @TheBuddyLeeChannel
    @TheBuddyLeeChannel Рік тому

    The original video is what got me to sub. Thanks. I really struggle with this process.

  • @bibouik89
    @bibouik89 Рік тому

    Nice result

  • @cesarmazadiego4773
    @cesarmazadiego4773 Рік тому

    This an amazing step by step would these techniques work with action figures ?

  • @krymson_reigns
    @krymson_reigns 6 місяців тому

    Great tutorial

  • @lokiwartooth1138
    @lokiwartooth1138 Рік тому

    THANK YOU

  • @SickestToyz
    @SickestToyz Рік тому

    Amazing !

  • @JesusIsKing373
    @JesusIsKing373 10 місяців тому

    Fantastic video, thank you💙✝️💙

  • @Vortex-gz8se
    @Vortex-gz8se 9 днів тому

    11:40 "As you can see"...actually no I can't...LOL. j/k Great video, was surprised how thin the rose wash was, will have to try that out.

  • @1002Ecaps
    @1002Ecaps Рік тому

    Thanks!

  • @TimTinhTran
    @TimTinhTran Рік тому

    looks great!

  • @ragingmando5956
    @ragingmando5956 Рік тому

    Wow!!!! Great job on that portrait!!!

  • @rothgamez
    @rothgamez Рік тому

    Thanks for the video! The process isn't as bad as I thought. I've been putting off doing any models with a face for that reason lol.

  • @darren990
    @darren990 Рік тому

    AMAZING VIDEO

  • @andreleblanc1839
    @andreleblanc1839 Рік тому

    Can you make a video about that pastel you used for the shaved off stubble? It adds sooo much to the face its amazing and I want to know more

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      I already have a video on pastels. Check it out in the tutorial section.

    • @andreleblanc1839
      @andreleblanc1839 Рік тому +1

      @@TheCreativeCollector ohhh thank you!! I just found your channel, so I will have a look!

  • @peterclegg2609
    @peterclegg2609 Рік тому

    Great video Henry, definitely bits I can use 👍

  • @davidmarrero9608
    @davidmarrero9608 Рік тому

    Great tutorial! Thanks for the tip on the skin tone also have you seen the Sideshow Superman call to action video? I ask since they do a method of using 3 washes being red, yellow and blue on the skin and was wondering if you can try doing a video showing that method that the painter showed

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому

      Yes Ive seen the video. I use that method every now and then. It's been around for a while. I dont have any plans on doing a video on it any time soon but maybe in the future.

  • @docholiday9911
    @docholiday9911 Рік тому

    Love it thanks for this Video

  • @gokux7856
    @gokux7856 Рік тому

    Awesome video dude ! Thanks alot !!

  • @rhazelrig
    @rhazelrig Рік тому

    Awesome, tutorial, thank you!

  • @alciel312
    @alciel312 Рік тому

    Im blown away every time I see you paint skin. Looks great. I had a question, did you use the rose wash on the sides of the head as well?

  • @JohnVanderbeck
    @JohnVanderbeck Рік тому

    God you are so talented. Maybe someday in 500 years I will be near that good. Probably not.

  • @murraymurray9489
    @murraymurray9489 8 місяців тому

    Wow man

  • @dtcez
    @dtcez 4 місяці тому

    I see lots of painters using a coat during the painting stage mostly after having a decent base color. What is that coat? a mat varnish? or something else?

    • @TheCreativeCollector
      @TheCreativeCollector  4 місяці тому

      Most likely. I do this so I dont smudge the paint when I need to handle it.

  • @adefoe6552
    @adefoe6552 9 місяців тому

    Any tips on how to do really short hair/buzz cut looking hair?

    • @TheCreativeCollector
      @TheCreativeCollector  9 місяців тому +1

      Try using pastels for a shaved head. For short hair just a base then dry brush a lighter color over it.

    • @adefoe6552
      @adefoe6552 9 місяців тому

      @@TheCreativeCollector thanks, I missed that tip my first playthrough of this video. Appreciate it!

  • @outlawfpv3792
    @outlawfpv3792 Рік тому

    Great work....do you use magnifying glasses?

  • @aurska4061
    @aurska4061 2 місяці тому

    Hi, would you recommend another varnish than the krylon as it’s hard to get in Europe ? Thanks 🙏

    • @TheCreativeCollector
      @TheCreativeCollector  2 місяці тому +1

      Vallejo and Citadel have a good one to use

    • @aurska4061
      @aurska4061 2 місяці тому +1

      @@TheCreativeCollectorthanks I’ll give those a try 😊.

    • @aurska4061
      @aurska4061 2 місяці тому +1

      @@TheCreativeCollector i tried the citadel varnish today and it is amazing! I used edding mat vanish before and it came out glossy on my model for some reason...anyway thanks again.

  • @gr81jay
    @gr81jay 6 місяців тому

    Dude that Pastel u used to bring out the 5 o'clock shadow is crazy! Does it stay on the figure as much as the Arcrylics?

    • @TheCreativeCollector
      @TheCreativeCollector  6 місяців тому +1

      Yes it does. Just make sure to seal it so it doesn't rub off.

    • @gr81jay
      @gr81jay 6 місяців тому +1

      @@TheCreativeCollector awesome! I definitely gotta try this out here soon

  • @jimboscustoms
    @jimboscustoms Рік тому

    Hey dude great video just subscribed did you seal again after the pastels?

  • @edgarangel5624
    @edgarangel5624 Рік тому

    This is awesome great work i really like your videos man helps me in my painting ! What printer did you use for cable ?

  • @DropNeo
    @DropNeo Рік тому

    Just discovered your channel it’s amazing! Subscribed!
    Just one question, when you seal the colors, do you use brush as well? Do you spray the brush and then brush the sculpt? ( I just didn’t understand that part)

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      Thanks for the comments. I usually seal a model with a rattle can. Krylon Color Maxx flat is what I use.

    • @DropNeo
      @DropNeo Рік тому +1

      @@TheCreativeCollector thank you so much for your response! Looking forward to more of your videos

  • @Lungshot420
    @Lungshot420 9 місяців тому

    Great vid

  • @jimallen4382
    @jimallen4382 Рік тому

    Hi Henry great video , skin tones is one of my weakest strengths in painting. The glazes you did on cable did you take them around the side of the head too .

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      Yes I did

    • @jimallen4382
      @jimallen4382 Рік тому

      @@TheCreativeCollector thanks I will have to give it a try

    • @jimallen4382
      @jimallen4382 Рік тому

      @@TheCreativeCollector would this way also work for female models

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому

      Yes but you would need to be subtle in the tones since most females skin is softer and not as dark.

    • @jimallen4382
      @jimallen4382 Рік тому

      @@TheCreativeCollector thanks this should help me out . This is why I don't put pics up of my models as skin tones let me down

  • @maximusthecannabist5170
    @maximusthecannabist5170 4 місяці тому

    What can i use to seal the paint to protect it from chipping off?

  • @thegrandboy2512
    @thegrandboy2512 2 місяці тому

    I don't have access to the Vallejo basic red, any other Vallejo reds I can substitute?

    • @TheCreativeCollector
      @TheCreativeCollector  2 місяці тому +1

      That's the only basic red I know of unless you get their game color or mech red

    • @thegrandboy2512
      @thegrandboy2512 2 місяці тому

      @TheCreativeCollector thanks for the reply man, I wanna take my first swing at painting 1/12 head sculpts as best i can. If you can recommend any other reds to achieve that same skin tone in the recesses, I'd really appreciate the help.

    • @thegrandboy2512
      @thegrandboy2512 2 місяці тому

      @@TheCreativeCollector actually would a flat red work? Or no?

    • @TheCreativeCollector
      @TheCreativeCollector  2 місяці тому +1

      @thegrandboy2512 yes

  • @kellyvanmetre2296
    @kellyvanmetre2296 Рік тому

    What paint would you recommend to replace the Panzer Highlight Flesh?

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому

      You could go with a basic Vallejo base flesh. Maybe a dab of white to lighten it up a bit.

    • @kellyvanmetre2296
      @kellyvanmetre2296 Рік тому +1

      @@TheCreativeCollector Thank you sir! Loving your content.

  • @the323vlog4
    @the323vlog4 Рік тому

    What color pan pastel are you using for the stubble?

  • @aurrym9730
    @aurrym9730 Рік тому

    Great work man. One question. At what percentage did u print this Cable to get it to 1/4 scale ? Thanks

  • @lemminggamer2005
    @lemminggamer2005 Рік тому

    what should i do i mixed my acrylic paint with water but the first layer in nearly transparent how do i fix this

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому

      Don't use as much to thin it down. Try using thinner rather than water. Also make sure you're using primer first.

  • @diegobrana3441
    @diegobrana3441 Рік тому

    Hi there, greetings from argentina!! I always watch your vídeos and tutorials, and let me say u r a great modeler, true. I got a question, perhaps u can help me, i use to print my figures in 1:16 más sufer big time when i got to paint the eyes, how can i paint the eyes well? What numbre of brush or pencil do i have to use? Ir how can i create ny own very VERY thin brush? I hope u can help me. And sorry for my bad english hehehe thnx in advance

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      You can use these Tamiya brushes I use for that plus you can use a fine tip mechanical marker for eyes as well.

  • @legospider1437
    @legospider1437 Рік тому

    Does this same process work for 1/12 scale heads as well?

  • @nicezii694
    @nicezii694 Рік тому

    I have stupid question. Why you have to seal base color before washes,
    can I apply washes color without seal base color?
    Will the results be different?

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      I seal because I sometimes wipe away excess wash off for a certain effect and sealing keeps from wiping the paint underneath off. You don't have to seal however the effect is a little different because the wash will bite more on unsealed paint. I do both.

    • @nicezii694
      @nicezii694 Рік тому

      @@TheCreativeCollector Can I apply this technique to other parts? like legs or chest

  • @filipesilva2215
    @filipesilva2215 4 місяці тому

    I saw you mix flat red withe white but you forget to say you have put skin color to the mix too

    • @filipesilva2215
      @filipesilva2215 4 місяці тому

      Did you put skin tone to the pinkish wash ?
      Can you tell please i need know for make the mix like you did

  • @batspideycek
    @batspideycek 7 місяців тому

    3:13 when I do this moves my brush removes colour on sculpt . Can you help me about that ? (I think problem is water colour mix ratio )

  • @markivankarlsancho9152
    @markivankarlsancho9152 Рік тому

    how do you seal paints?

  • @nmaida8522
    @nmaida8522 6 місяців тому

    What primer do you use?

  • @Jayy8Bit
    @Jayy8Bit Рік тому

    I'm having an issue with mine. Using the Citadel paints from your other video, the paint rubs off of my resin prints even after it is completely dried. It rubs off to the point that it doesn't look like it was ever painted. Any tips to get the paint to stick better?

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому

      Are you primering first?

    • @Jayy8Bit
      @Jayy8Bit Рік тому

      @@TheCreativeCollector ..... No because I got ahead of myself and missed that part of the video haha.

  • @mr.electronx9036
    @mr.electronx9036 7 місяців тому +1

    I have a trick for the skin texture.
    toothbrush.

  • @cyclogenisis
    @cyclogenisis Рік тому

    what are you using to hold your model?

    • @TheCreativeCollector
      @TheCreativeCollector  Рік тому +1

      If I'm not holding it with my hand I hold it on a skewer stick with an alligator clip

    • @cyclogenisis
      @cyclogenisis 4 місяці тому +1

      @@TheCreativeCollector thanks!

  • @Foxiepawstotti
    @Foxiepawstotti Рік тому

    What is wisping? I havent heard that before, I heard of Wispa Chocolate bars but never wisping. I get the feeling I should know but thats maybe why myfaceups dont come out as good as yours lol!😜

  • @arawak73
    @arawak73 8 місяців тому

    But what about large smooth skin areas like on a woman. I dont have a problem painting skin tones on faces and male models who usually have more texture to the skin, but female models have a much smoother finish and its hard to hide your brush strokes on those larger areas. Id love to see how you work around this.

    • @TheCreativeCollector
      @TheCreativeCollector  8 місяців тому

      Thin coats. Several thin coats. It takes time but the results are worth it.

  • @3d_decofigur
    @3d_decofigur 6 місяців тому

    hello, what number is the brush?

  • @IamNoTaBotBruh
    @IamNoTaBotBruh 11 місяців тому

    Brother. My life so stressed. I wanna dive into this.. how much for your entire paint set and brushes and all. What can I expect the budget should be.

    • @TheCreativeCollector
      @TheCreativeCollector  11 місяців тому +1

      It depends. You can start with basic sets that'll get you started and mix your own paints. You can but other sets along the way. Plus if you want to airbrush that's another expense.

  • @ENDUROMASIVO
    @ENDUROMASIVO 9 місяців тому

    Great model of @stuardoalvaro ... CABLE is my favourite character of XMEN

  • @sweettoof81
    @sweettoof81 Рік тому

    Teeth, tusks and fangs are the hardest for me to paint. They just never look right

  • @thesweeples3266
    @thesweeples3266 7 місяців тому

    Where is your wet pallet?

  • @tomdelaney19464
    @tomdelaney19464 Рік тому

    So why is it so complicated for me? Haha. Skillz

  • @JeremyDN
    @JeremyDN Рік тому

    Awesome. This helps a lot. Realistic skin is still giving me trouble. Heh.

  • @IamNoTaBotBruh
    @IamNoTaBotBruh 11 місяців тому

    Are you on i.g.? I will share your stuff on i.g. never did the patron thing but u make me wanna think about it