Thanks for the info. I have watched you for a while now. I think it was you that gave me me good info about the S1, so I bought it. I no y I u have other lasers now. But I glad to see a new video with the S1. Awesome job explaining as always.
I’ve had some good results with the F1 Ultra using art paper. I’m going to order the spay though. I have some Christmas present ideas I want to try for two red wine lovers.
Have you used the S1 on standard type Christmas baubles, as you know they have a very shiny crome surface of many colours ( colours this side of the pond )😊 also will have to find a paint brand that has the same qualities as your Cermark, thanks in advance
So the xtool doesn't actually etch the glass it just bonds the spray material to the glass? I was under the assumption that they would actually etch the glass. So what color sprays can you get besides black and grey?
want negative focus set your measurement as normal then before you start just manually reduce the value by whatever you want the negative to be so 87.4 is focus change to 84.4 for 3mm
I am running 300mm/s, that is much faster which allows for higher power output. I also only run on pass and got good results. I have a fair amount of experience in the matter. Thanks
Thanks for the info. I have watched you for a while now. I think it was you that gave me me good info about the S1, so I bought it. I no y I u have other lasers now. But I glad to see a new video with the S1. Awesome job explaining as always.
Thanks.. I use it pretty regularly,
I just try to mix the content up.
Thanks this helps, the S1 is a good machine
Glad you liked it
Nice results. If you ever get the time to do a glass on the Ultra I wouldn’t argue 😉. Thanks as always for sharing your experience.
Maybe you will get time..
Great info. Thank you. I have not tried my RA2 rotary tool yet. Now that I have seen it done I am itching to try it. 😊
Mine has many miles on it... lol.. Have fun
Horrible. Didn't show us your ruler trick. The ruler 📏
another great video Clack
Thanks..
I’ve had some good results with the F1 Ultra using art paper. I’m going to order the spay though. I have some Christmas present ideas I want to try for two red wine lovers.
Sounds great!
Nice tutorial!
Glad you liked it!
Good to know. I have a D1 Pro 10W and still haven't set up and tried anything with the RA 2. I'm a bit intimidated.
You'll get there.
Could you try using the F1 Ultra and curved surface to see if you get a better result?
I prefer just using a chuck. I was asked to demonstrate using the S1.
How many tumblers, glasses or cups can you get out of that can of Cermark that you showed in you video?
It depends on the size of the engrave. Lots, I have only used a couple cans in 3 years
Do you not mark the conure of the glass with the marking function? I thought that was one of the advantages to the S1.
I have never used it, I learned how to work without it. It has curved surface but not sure it works with rotary.
Do you know if that cermark spray works on clear acrylic?
It will have a similar effect. It would require testing to get the right settings.
Have you used the S1 on standard type Christmas baubles, as you know they have a very shiny crome surface of many colours ( colours this side of the pond )😊 also will have to find a paint brand that has the same qualities as your Cermark, thanks in advance
Not sure what you mean by baubles.. sorry
Round shiny ball that you hang on a Christmas tree😊
@ I haven’t but it would be same process
@TheClackShack brilliant, BTW thanks for all your time and effort in sharing your knowledge, fabulous channel and top notch content, thanks brother👍
So the xtool doesn't actually etch the glass it just bonds the spray material to the glass? I was under the assumption that they would actually etch the glass. So what color sprays can you get besides black and grey?
It will etch the glass where the spray is present. No blue laser can mark glass without an agent to assist.
@@TheClackShack Thanks for the reply. Also, thanks for your informative videos on the Xtool.
Is it possible to share/sell the blueprint of your wooden base you have? It is amazing and it definitely will save a lot of time and guessing.
It is a square, the size of the machine.
Can you use the CO2 lasers?
Yes, you can get white frosting without marking spray with a CO2.
Do you have an IR 2 watt?
Not on the S1, yet
want negative focus set your measurement as normal then before you start just manually reduce the value by whatever you want the negative to be so 87.4 is focus change to 84.4 for 3mm
Yea, that would work. I am used to it being in layer settings… lol. Lightburn junkie
I use an S1pro; you're giving it way to much juice. My settings are 10w @80mm/sec. you should only need one pass.
I am running 300mm/s, that is much faster which allows for higher power output. I also only run on pass and got good results. I have a fair amount of experience in the matter. Thanks
So , you are not actually etching the glass . You are getting the paint to bond to it .
in this situation, kinda both. Settings dictate
@ thank you for responding . Can the glass be etched with a frosted look