2008-2010 INFINITI EX35 AWD 5 Speed Transmission Oil Pan, Fluid & Hoses
Вставка
- Опубліковано 7 сер 2024
- - Just a Nissan/INFINITI guy trying to share his work and findings to help others -
Part Numbers:
Nissan Matic-S (x5): 999MP-MTS00P
Transmission Oil Pan: 31390-90X0B
Transmission Oil Pan Gasket: 31397-90X0A
Transmission Oil Pan Bolt (x22): 31377-41X60
00:00 Intro
00:05 Oil Pan Torque
00:10 Pan Bolt Sequence
00:15 Exhaust Bracket Torque
00:20 Oil Pan Inspection
00:43 Drain Plug
01:20 Draining Oil
01:36 Oil Pan Bolts
01:50 B2S2 O2 Sensor Plug
02:33 Exhaust Bracket
02:53 B1S2 O2 Sensor Plug
03:10 O2 Sensors' Bracket
03:28 Oil Pan Bolts Cont.
03:57 More Oil Draining
04:20 Oil Pan Removed
04:26 Filter Inspection
04:41 More Draining
04:52 Oil Pan Magnets
05:20 Plastic Razor
05:40 Prepping New Pan
06:42 Installing New Pan
07:51 O2 Sensors' Bracket
08:04 O2 Sensor Plugs
08:25 Filling Oil
10:37 Checking Level
12:48 Transmission Hoses
19:04 Outro - Авто та транспорт
Thanks for the video. I bought a 2010 with 160k miles. Definitely need to check the ATF.
Are the crush washers all the same for the transmission - transfer case - and differential? So many superseding part #’s ;( Thanks for the videos man just in time as i recently picked up a 2016 ex37 too! 👍
Thank you for the feedback and congrats on the car! For the 370GT/EX37/QX50 (not sure where you are in the world).
- The copper crush washers (11026-JA00A) are the same on the engine and transmission drain plugs.
- The front and rear differential uses the same aluminum washers (11026-4N200) for both the fill and drain plug.
-The transfer case also uses the same aluminum washers (11026-1CA0A) for the fill and drain plug, HOWEVER, the transfer case washers do differ from the differential washers.
- (Part numbers are from a USA market vehicle, so I'm unsure if its the same for international vehicles)
Hope this answers some questions for you. Thank you!
thanks for your video. have any idea of standard size of the transmission oil pan mounting bolt. M6 or M8 ?
I believe they're M6. Not sure of the thread pitch though, maybe 1.25.