Build Your Own Retro Hi-Fi FPGA Gaming Machine!

Поділитися
Вставка
  • Опубліковано 27 сер 2024

КОМЕНТАРІ • 320

  • @alexanderalfonsson5874
    @alexanderalfonsson5874 3 роки тому +14

    "I bought this plank on etsy" made me laugh pretty hard. I imagined you buying a regular 2x4 or something. XD

  • @kevin1337ninja
    @kevin1337ninja 3 роки тому +26

    The MiSTer Add-ons Aluminum case is amazing. And the digital IO board has a dedicated switch to turn the unit on and off.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому +7

      Oh man, that’s neat! Wish I knew that!

    • @AG-bp3ll
      @AG-bp3ll 3 роки тому +2

      This is the case I went with. It is a great looking case and allows the MISTer to be used with no fans.

  • @matthewjohnson1891
    @matthewjohnson1891 3 роки тому +1

    Myne has been evolving. I think its done. I have it all portable with a 4:3 screen and everything running of a 100watt pd battery. No wires. I have snack molded in and s video with analog audio out too. So cool.

  • @RBeau
    @RBeau 3 роки тому +3

    Awesome! Glad you joined the MiSTer club. Can’t wait to see more MiSTer content on the channel.

  • @RetroTechUSA
    @RetroTechUSA 3 роки тому +1

    Wow Tito. That's a beautiful Mister Case. I Love it man. Thanks for showing it off.

  • @samsonspubllc8592
    @samsonspubllc8592 3 роки тому +2

    Just finished building my setup. Took a lot of inspiration from and/or directly copied your build. Used my CNC to engrave the top acrylic. Turned out wonderfully. Thank you for posting this.

  • @RedGreen1
    @RedGreen1 3 роки тому +5

    Your self built cables are really clean looking. I’m borrowing the mesh loom and heat shrink process, thanks for the tip!

  • @SmokeMonster
    @SmokeMonster 3 роки тому +3

    Awesome build, I really like that. Thanks for the plug too!

  • @torokun
    @torokun 3 роки тому +2

    I just put together Mr. Addons’ aluminum case for my MiSTer system. I love it more than the new consoles. :)

    • @torokun
      @torokun 3 роки тому

      @@YoureUsingWordsIncorrectly get the parts from Ebay and make one!!!

  • @PuppetMaster8707
    @PuppetMaster8707 3 роки тому +3

    I REALLY love the retro woodgrain and aluminium look as well I think it looks very sharp

  • @St.thr33
    @St.thr33 3 роки тому

    Tito, it's like you're reading my mind. I've just spent the last week researching MiSTer builds and then I see this video pop up on my feed.
    Quality stuff like always mate!

  • @RamonHernandez
    @RamonHernandez Рік тому +1

    This was an excellent idea. I can't believe I haven't seen this until today.

  • @fabianwareinc1171
    @fabianwareinc1171 3 роки тому +28

    Would love to see a video on how you setup the MiSTerFPGA! I simply enjoy how you explain everything in your videos, that's how I was able to do the GBA SP Unhinged! Which by the way thank you!

  • @Cherokie89
    @Cherokie89 3 роки тому +1

    Looks just like high end hi fi equipment and I freaking love it

  • @gray41462
    @gray41462 3 роки тому +4

    What a great build and combines my two favourite hobbies, wood working and retro gaming. I think I’m going to have to try this. Quick tip though use a Awl instead of a pencil for marking those locations for drilling you’ll have a much better time.

  • @andygoss3117
    @andygoss3117 3 роки тому +9

    If you could add a push button power switch like the older Marantz and Pioneer Receivers from the 70s would be cool 😎

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      That would be so cool! Would love to do that. I have an old marantz receiver, such good quality back in the day

  • @CralexKokiri
    @CralexKokiri 3 роки тому +1

    A MiSTer is an incredible investment that keeps getting better and better. I went with the digital IO board since I don’t have a CRT setup going and because of nice features such as the integrated power switch. Many cores can also switch to using true analog-out using a cheap HDMI to VGA cable. (Lookup having alternate INI files for how to easily switch between the two as needed.) Since your case is so modular, I’d definitely consider switching to a digital IO board and selling the analog one.
    Some of the craziest things I’ve seen from it, other than the WIP Saturn core, are multiplayer side-by-side gameboy games and cores that support rewind and save-states, since the implementation is completely different from the same feature in traditional emulators. There’s also a variety of the NES core that can play prerecorded inputs in-game, like having your own TAS-Bot.
    Finally, you might be interested in Super Attract mode. It lets the system randomly cycle through games when idle.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Whoa that is so cool! Thanks for all the great info! I like the super attract mode idea, very cool!

  • @drcarrot415
    @drcarrot415 3 роки тому +1

    You could install a classic looking stainless steel button right on the front of the wood block, and drill a hole back and up routing the wires right under one of the boards, and wire it up so that the + power goes through the button, to both of the power jacks. The input could simply be a panel mount barrel jack glued to the back of the system, or even drilled into the wood the same as the button if you want a really clean look

  • @middle_pickup
    @middle_pickup Рік тому

    Pro tip. Go to a fabric store and buy yourself a bit of silk to use as a dust cover for that mister. The open air case looks rad, but cleaning dust off electronics is a huge pain. I use the same method for my guitar pedalboard. Saves you a lot of cleaning, and protects your gear when you're not using it.

  • @enthusiasticgamer88
    @enthusiasticgamer88 2 роки тому +1

    Thanks for the inspiration! This has made me realize I'm going to DIY my own with the aluminum case from mister addons for sure. It will be fun to have this for arcade cores and anything else my Analogue consoles don't offer.

  • @Elkhife
    @Elkhife 3 роки тому +1

    Nice case, it looks awesome. This would be a great PC case idea too.

  • @JPHarringtonJr
    @JPHarringtonJr 3 роки тому +1

    My brain is going to be REELING with ideas on ways to build one of these things now. Oh man I'm gonna get drawing.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Awesome dude! Can’t wait to see what you come up with! I made a mister channel in the discord server for folks to share their builds

  • @sinetwo
    @sinetwo 9 місяців тому

    This looks gorgeous, well done for giving me some cool ideas to 3d print and mock up! I would say the ooonly small thing I'd suggest was what you said in terms of the power switch, ideally a brushed steel power button on the front of the wood itself, with an LED light for when it's on. The other thing could be to round off the edges on the plexi so that it matches the curves of the wood beneath. Either way, a fantastic project and really nicely filmed.

  • @nottelling6598
    @nottelling6598 3 роки тому +1

    It definitely needs a metal toggle, possibly one that's fashioned after an antique light switch that has 'on' and 'off' in old, chipped paint.
    You could also have it use brown cables to look like those old-fashioned extension cords, which would look great with the wooden base.

  • @TheNets
    @TheNets 3 роки тому +1

    Man, this was by far the best video that I saw on your channel. Maybe cause you were enjoying creating something on your own, you looked so excited that made a more enjoyable video. Also, the intro was insane, it's better on every new video release.

  • @NatLee
    @NatLee 3 роки тому +3

    This looks slick! Reminds me of the stereo system my dad set up as a kid!

  • @kazinwho
    @kazinwho 3 роки тому +6

    That looks great. Someday I'll get into the MiSTer... Probably as soon as I hear Saturn support is 100% lol

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому +5

      Can’t wait for the saturn core!

    • @iamtheflu
      @iamtheflu 3 роки тому

      I didn't even know Saturn was going to be a thing on this. I was waiting for wider arcade support. Then again, I'm kidding myself if I'm saying I won't spend 90% of my time with Neo Geo games.

  • @Tom-vt5bf
    @Tom-vt5bf 3 роки тому +1

    Great job. I would love to see more videos on this build and the mister in general.

  • @cacophony6963
    @cacophony6963 3 роки тому +2

    Great video! Though it's worth pointing out that you do *not* need the IO board to get quality, lag free output to a CRT. A simple HDMI to VGA converter does this via the "direct video" mode in MiSTer. I use this mode to send RGB to my PVM and it works great.

  • @MarceloMedeirosb
    @MarceloMedeirosb 3 роки тому

    Welcome to the MiSTer family! I think you're gonna love it, from what i get from your videos =). Once you get into MiSTer, theres no going back!

  • @ScruffyLookinRGB
    @ScruffyLookinRGB 3 роки тому +1

    Very clean build Tito! Ive been thinking about getting a mister for a while now. I really love how you have the ability to customize it both astetically and with how many different cores you can play on it 👍👍👍

  • @bountyhuntersouth
    @bountyhuntersouth 3 роки тому +1

    your video editing is incredible! great to see the channel grow

  • @Th3OmegaPoint
    @Th3OmegaPoint 3 роки тому +2

    Nice job Tito, looks amazing!

  • @smashpro1
    @smashpro1 3 роки тому +2

    I know that what the big thing that MiSTer devs are working on is cores for PS1, N64, and Saturn, which I think are the theoretical limit of what consumer-level FPGAs are capable of.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      That would be so cool to have! Hopefully they are able to it to work on mister!

    • @FoxbatStargazer
      @FoxbatStargazer 3 роки тому +2

      N64 has been pretty much ruled out, its running at too high of frequencies. Saturn is coming along quite well though and Playstation still trucking along albeit at a slower pace.

    • @ynotwalk7391
      @ynotwalk7391 3 роки тому +2

      yeah i would not wait on N64

    • @smashpro1
      @smashpro1 3 роки тому

      @@FoxbatStargazer That seems weird that Playstation is advancing slower, considering how much more popular it was, and is easier to emulate.

  • @Evercade_Effect
    @Evercade_Effect 3 роки тому +1

    Your case looks fantastic and so so well professional done looks like it was sold that way. If you had a store with a pre-built case and all people had to do was pop in their MisTer people would buy it. Again man well done and great video as always!

  • @alexanderalfonsson5874
    @alexanderalfonsson5874 3 роки тому +2

    Beautiful build btw. Really has the feel of a high end turn table or tube amp.

  • @nintendope1
    @nintendope1 3 роки тому +2

    This project looks amazing! Great job.

  • @Meerlu
    @Meerlu 3 роки тому +1

    I put mine into a tiny itx case. They actually make itx boards that you can put the nano into, but i DIYed it.

  • @alexandermcbryde2348
    @alexandermcbryde2348 2 роки тому

    I am so happy I stumbled onto this channel. So much Retro Love and Mods

  • @ratykat
    @ratykat 3 роки тому

    Awesome work on the case! For the buttons, 3 small holes in the top acrylic and 3 lengths of clear acrylic to act as extended buttons could look nice, as for power - you could add a push toggle button on the front opposite to the mister logo. Cut a channel on the bottom going front to back, drill the opening for the button on the front, and drill vertically from the bottom side connecting the channel and the button hole. Similar to how "Ben's Worx" does his power button installs for his light up acrylic art. You could even salvage a button from some vintage knackered hifi for extra authenticity!

  • @yllib2012
    @yllib2012 3 роки тому

    My favorite cases are the aluminum passively cooled cases sold my MiSTer Addons. I have two MiSTer setups in sliver anodized finish cases with all addon boards and parts. These will remain my favorites until (or if) someone makes a fully CNC machined aluminum case that I can actually buy. For now, having a CNC machined case is a dream and may never become a reality. If they do become something you can buy expect a long wait to get one.

  • @slowlymakingsmoke
    @slowlymakingsmoke 3 роки тому +1

    That is the best looking Mister case I have seen. Well done. I think a steel power button in the front of the wood panel would look fabulous. It is a thick plank of wood, so I am thinking you could route a power plugin into the back of the wood and drill a hole in the front to feed the cable and power button. The result would be a completely concealed power system.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Thank you! That sounds like a great idea!

    • @Capography
      @Capography Рік тому

      Wow, I totally missed this a year ago, but that's actually exactly what I did. It turned out as well as you'd imagine.

  • @RetroRockGamer
    @RetroRockGamer 6 місяців тому

    This is really beautiful, love the retro style.

  • @xthedudex
    @xthedudex 3 роки тому +1

    Dude, that case is FIRE!! You pulled off the old-school hi-fi look beautifully!

  • @Negrodomaus
    @Negrodomaus 3 роки тому

    This is the first time watching retro gaming content, since retro-future, that I caught myself saying out loud "This guy is the real deal."

  • @dymardo_
    @dymardo_ 3 роки тому +3

    Som dude in the future find this: wow this looks so retro, I wonder if it run any quantic games

  • @ClosestNearUtopia
    @ClosestNearUtopia 3 роки тому

    For an authentic feel, use a donor snes, take the switch part, cut out a piece of acryl, place the switch, connect to the right voltage, link them to the devices, get a nice remarkable click whenever you turn on this thing!

  • @ZaPpaul
    @ZaPpaul 3 роки тому

    Nice to see someone use the soldering iron to shrink the heatshrink. The times I see builders using open flames when they clearly have a soldering iron right there, amazes me. Anyhow. Yeah the MiSTer is an awesome system, complete next level emulation.

  • @STHelton1
    @STHelton1 3 роки тому +1

    Truly a beautiful build. Good job.

  • @andymuzzo8568
    @andymuzzo8568 3 роки тому +1

    Amazing looking build

  • @troutsoup
    @troutsoup 3 роки тому +1

    thats pretty sexy. i'd def like to see a tutorial on the OS install!

  • @BashoStrikes
    @BashoStrikes 3 роки тому +1

    Alright! Reminds me of my Marantz 2230. Very nice.

  • @DrJ3RK8
    @DrJ3RK8 6 місяців тому

    Nice build! I've been building sandwich MiSTers using milled/anodized aluminum plates. I've also had things like PC Engine, Genesis, and Super NES logos UV printed on them depending on the friend that I've built them for. (Mine has the PC Engine Logo on blue Anodize, which while not an accurate PC Engine color looks pretty nice :D ) They go pretty well with HiFi stuff too. Mine usually sits next to the turntable and tube preamp in my living room when I use it there, and doesn't look out of place.

  • @wonderingmonitor1996
    @wonderingmonitor1996 3 роки тому +1

    Awesome video as always Tito. Would love a separate one on setting up the Mister. Sure, there are other vids on the web but will have none have that cool Retro Renew esthetic.

  • @jonnyesper6698
    @jonnyesper6698 3 роки тому +1

    route a switch in the timber as well as the 3 I/O buttons

  • @vvlist
    @vvlist 3 роки тому +2

    What about shorter standoffs underneath the boards? That might help with reaching the buttons. Really enjoyed this video. Now I want a MiSTer!

  • @ChadZeluff
    @ChadZeluff 3 роки тому +5

    Really awesome video :) wish this included the LLAPI hardware to allow for original controllers, which is my main demand for retro games, even over core accuracy.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому +2

      Def need to look into that!

    • @ChadZeluff
      @ChadZeluff 3 роки тому +3

      @@MachoNachoProductions Googling “MiSTer SNAC” will send you down the right road, my friend!

    • @ynotwalk7391
      @ynotwalk7391 3 роки тому

      that stuff is outdated now

    • @theheroslegend
      @theheroslegend 3 роки тому

      @@ynotwalk7391 The LLAPI cores are updated usually shortly after the main cores are. Granted, there are only a few LLAPI cores in comparison to what’s available normally, but it’s certainly not outdated for those that exist.

    • @ynotwalk7391
      @ynotwalk7391 3 роки тому +1

      @@theheroslegend
      it seems like fast usb polling and snac are the more current options

  • @siskavard
    @siskavard 3 роки тому +1

    I love it - it would be cool if you could somehow turn one of the 4 standoff tops into a power button

  • @blakryptonite1
    @blakryptonite1 3 роки тому +1

    I only have one DC jack. I use the original DE10 nano power adapter, along with a $7 Kasa smart plug from amazon. I turn my MiSTer on from my phone.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Whoa very cool!

    • @blakryptonite1
      @blakryptonite1 3 роки тому

      @@MachoNachoProductions Yea get the HS103P2 from amazon if you want a complete wireless solution. Also for the controllers, for near 0 latency use the 8bitdo SN30 and 8bitdo N30 Classic Editions along with Raphnet Adapters. I bought all my controllers Used-like new, sold and shipped by amazon (they're basically new but someone bought and returned but about $10-15 cheaper than new)

  • @Ianhilts667
    @Ianhilts667 3 роки тому

    Nice build idea. I might try something like this. I can definitely recommend swapping out the stock fan for a Noctua NF-A4x10 5V (3 pin). I comes with a dongle for connecting directly to the IO board so no soldering needed. It makes the whole thing much quieter.

  • @michaelcstachiw
    @michaelcstachiw 3 роки тому +14

    We need a vinyl core

  • @jrsoit
    @jrsoit 3 роки тому +1

    Yes do a video on the software!

  • @misterchip1984
    @misterchip1984 3 роки тому +1

    Just beautiful. Very very well done. Thanks for sharing the build. Any changes you’d make after using it for a bit?

  • @Hovel7007
    @Hovel7007 3 роки тому

    Check the digital IO board if you want a power switch. The switch would end up on the outside of your build if I’m not mistaken. It doesn’t have analogue out, but you can also get that from the DE-10 hdmi port using a cheap dac.
    Check the vga to bnc cables for resistors if your PVM needs that. This has to do with the sync voltage, which can damage your TV/PVM crt in some cases!

  • @ryujiyamazaki583
    @ryujiyamazaki583 3 роки тому

    Tito my brother U smashed it again! Amazing build, what also can do is you can make those buttons longer so that they come out of the plexi glass. I would also appreciate if U can make also a video about the software part for the MITER, like how to set it up and how U can add a controller and etc as your videos R amazingly explained! Just wanna say U R a TOP guy! Keep it up 💪!!!

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Thank you Ryuji! So glad you enjoyed the video and liked the build! Great suggestions! Cheers buddy!

  • @MrBenedictHeyer
    @MrBenedictHeyer 3 роки тому +1

    Nice video! Concerning hooking it up to the PVM: you don't need a special cable. You can just use a normal VGA to BNC cable.
    The sync levels would not be suitable for, say, a SCART TV, but it's fine for your PVM.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Awesome, thank you!

    • @MrBenedictHeyer
      @MrBenedictHeyer 3 роки тому

      @@MachoNachoProductions no problem! Oh, and also be sure to activate Composite Sync. This can be done by manually editing the Mister.ini or using one of the default scripts from the menu.
      The VGA to BNC cables have five leads, RGBHV. the Composite sync signal will be on the HSYNC line of the cable. Connect this to the external sync input of your PVM and you should be good to go.

    • @coopercummings8370
      @coopercummings8370 3 роки тому

      @@MachoNachoProductions Those should work for your PVM, but some other options that may work better in your setup include component cables, which you can get from misteraddons (it only has the 3 YPbPr cables, you need a separate headphone to 2x RCA cable for audio), you just need to set ypbpr to 1 in mister.ini. You can also get a SCART cable for it, but be careful because many cheap ones don't use an appropriate resistor to make sure sync levels are safe. Ultimate mister or retro access cables are very high quality and should have the proper resistor on the sync line.

  • @remy333
    @remy333 3 роки тому +1

    So clean.

  • @Izquierda
    @Izquierda 3 роки тому

    This looks awesome. Monoprice cables are very good for "VGA" (D-Sub 15) to BNC for your PVM.

  • @RastaJediX
    @RastaJediX 3 роки тому

    @Macho Nacho Productions the Monoprice VGA to 5-BNC RGB cable is great for what you want and it's what most of us use! Available cheap on Amazon!

  • @SuperNicktendo
    @SuperNicktendo 3 роки тому +3

    Once they have Midway core support, I'll be all over this. Your build looks amazing. I used a Monoprice VGA to RGB cable for my Analogue NT Mini. You will need BNC adapters tho.

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому +2

      Lots of great Midway classic at the arcade. Looking forward to that support too!

  • @AndyVandercoy
    @AndyVandercoy 3 роки тому

    It's really amazing tech and I can't wait for even more support and cores.

  • @TheDainerss
    @TheDainerss 2 роки тому

    This may be a bit late but the Analog IO board has a header that provides the same functions as the 3 buttons at the top. Just beside the buttons you should see a 5 pin header, it is sandwiched between the buttons and a 7 pin header, this header is the one you want.

  • @WalrusFPGA
    @WalrusFPGA 3 роки тому +1

    Pretty unique build- thanks for sharing. If Alterra ever saw this they would probably have a true "WTF" moment. Can't imagine they ever thought people would be mounting their dev boards in such ways heh. The future is bright for this platform & it gets better every week. Honestly it can be a bit overwhelming with how much is there already.. and around the corner are PSX, Saturn and X68000 cores. 🤯

  • @apollolux
    @apollolux 3 роки тому +1

    This particular setup is still susceptible to external dust, pet hair, etc. due to the open sides. In the future, you might want to consider a box lid or other similar enclosure that covers the whole thing when not in use if you want to retain the hi-fi aesthetic, like how some record players used to do. Making one from Lexan or other clear acrylic should be a simple affair and probably has some decent tutorials on UA-cam.

  • @casperr3717
    @casperr3717 2 роки тому

    08:04 Wooow i learned something handy today. So simple yet so handy, Thanks!.

  •  3 роки тому +1

    it looks fantastic

  • @Bemijaminji
    @Bemijaminji 3 роки тому

    Consider drilling holes for the buttons and power cables in the wood base.

  • @redeemer66666
    @redeemer66666 3 роки тому

    Awesome build. Love your videos, they're both informative and fun.
    You've actually inspired me to put together a PAL SNES themed GBA.

  • @damagio2527
    @damagio2527 2 роки тому

    Very nicely done! Looking to build one myself, and I love the case you made.

  • @zackpetrovic3029
    @zackpetrovic3029 3 роки тому +2

    Cool, needs some vacuum tubes

  • @gothicchocobo
    @gothicchocobo 3 роки тому +1

    I want to get a MiSTer! The only additional thing I think it needs is cartridge/disk support. I would love to get one and use it with my original cartridges as well as ROMs.

  • @moshawnla
    @moshawnla Рік тому

    My goodness these opening shots 💸💰🤑

  • @chivatech
    @chivatech 3 роки тому +4

    Tito I wish you would have explained what the hell this thing is lol

  • @Hawkeyehunter69
    @Hawkeyehunter69 3 роки тому

    I am one of the lucky few that have an Analogue Super NT and Mega SG. But this device is also very interesting.

  • @currytigre
    @currytigre 3 роки тому +7

    Love the aesthetics! Would this normally be stacked as a 3 level tower? Is that why you modded the usb micro adapter?

  • @andywest5773
    @andywest5773 3 роки тому

    It looks soooo good. I wish I had that kind of design sense. If I ever get around to building a MiSTer console, there's a good chance I'll do it this way.

  • @ChrisKewl
    @ChrisKewl 3 роки тому

    That is beautiful, something that would look great in the living room! I may steal some of your ideas!

  • @djkibblesnbits
    @djkibblesnbits 3 роки тому +1

    Your build looks real smooth, man. Love the way it looks-if you could find a way to add like a metal toggle switch to the unit to give you that button you're looking for, I think it would look great with what you got.
    Would you be able to give us an estimated cost for your build?

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому +2

      Thanks Ray! I should have included the price in the video. It isn’t cheap, but the case materials aren’t too expensive. I listed everything in the video description for reference. Cheers buddy!

  • @theretrogeek2281
    @theretrogeek2281 3 роки тому

    Your intro kicks ass…

  • @RetroWK
    @RetroWK 3 роки тому

    Nicely done!

  • @Jarhead64
    @Jarhead64 2 роки тому

    Great build and looks amazing!! 👌 I would like to see your tutorial on the OS!!

  • @wyatt606
    @wyatt606 3 місяці тому

    I want you to show me how to build a pb & j sandwich. Yes, I would like to see your tutorial for software setup, even if it is redundant

  • @theheroslegend
    @theheroslegend 3 роки тому

    While it doesn't have as many USB ports, I used the BlisSTer board from Bliss-box instead of the USB board. It has a power button built-in and also includes two LLAPI ports that allows for more accurate controller input polling than USB's 1ms fast polling.

  • @TheSocialGamer
    @TheSocialGamer 3 роки тому

    This is just the design style I've been looking to make, now I have a template to refer too... thanks hermanito Nacho..! Sexy design bro!

    • @MachoNachoProductions
      @MachoNachoProductions  3 роки тому

      Awesome dude! So glad you like the design! Best of luck on your build!

  • @squeeeb
    @squeeeb 3 роки тому

    Great job on the build. You can extend the buttons (as well as LEDs) using the nearby JST connectors - check out the IO board schematics for details.

  • @Lawous1
    @Lawous1 3 роки тому

    That case you made was awesome.

  • @hamsterwolf
    @hamsterwolf 3 роки тому

    like the build just Couple thoughts and recommendations.
    And alternative for the power splitter would be to make your own. With a double pole double throw switch. Or if those two boards use the same voltage. Connect them in parallel to each other and mount a single pole switch some where.
    I think the USB cable might require shielding. So if it's acting funny on you modify an existing type c cable could be a better option.
    Rounding the corners of the plexiglass to match the base would look nicer.
    With your skills you could probably make some real nice vga to component cables from a good quality component cable for a PS3, wii or Xbox360 cable. Guys in the og Xbox modding scene do this all the time cause hd cables are so rare for the og Xbox you could probably pull of the Same but with vga.

  • @spokehedz
    @spokehedz 3 роки тому

    If you want to turn the console on and off, you might want to have a remote controlled switch. Either RF with a cute little remote, or a new IoT one that will do the same thing just with more Internet of Things. ;D And some of those RF units have more than one relay, so you could wire them up as the other three buttons on the console. Just be sure that the power relay is a "latching" one, and the other relays should be momentary.

  • @mattgamer
    @mattgamer 3 роки тому

    How are you rotating those objects at the beginning? So cool!
    You remind me of my friends as kids who had all the toys I wanted. Thanks for sharing! (:

  • @glitchedmac
    @glitchedmac 3 роки тому +1

    Every time I see a new video from you my wallet screams. I muffle the screams though... cause this looks like some fun kit!