Iron 883 Bobber Build (Time Lapse) | Fender Chop, Blinkers and Seat!!
Вставка
- Опубліковано 29 вер 2024
- Iron 883 Bobber Build Time Lapse! Fender Chop, New Blinkers and Seat!!
Finally I am able to upload the first part of my bobber build series. This is gonna be really amazing when I am done. Please let me know what you think and if you have any more ideas for me!
Songs:
NCS: JJD - Adventure
NCS: Jim Yosef - Can't Wait
Go Follow my instagram!!
SUBSCRIBE: www.youtube.com...
Equipment Used:
Grinder: amzn.to/2eT4jIT
Grinder Blade: amzn.to/2gafzpz
Dremel: amzn.to/2fPMhbl
Wire Tool: amzn.to/2g7xrlF
Also needed are some wrenches, a little jack, and small stuff like that.
Motorcycle Mods:
Rear Shocks: amzn.to/2gagKVO
Exauhst: amzn.to/2eXtsFP
My Gear:
Helmet: amzn.to/2exKnzU
Camera: amzn.to/2gabcL1
Mic: amzn.to/2eXq7pW
Your real best friend...
-The Alien Beard
music is totally non-HD
Dam bro your a true badass full of talent my man! Now I want to do my iron like that ! Dam !!!! It looks so hot night and day difference . Mine is a 2016 and I have made it nice and quick . About 85 hp now and I really want to chop the rear . Thank for the inspiration my friend . Be safe.
Damn bro, that was scary to watch - super nice job! That turned out great!! 👌
Thank you man.. it was even scarier doing it!
Very nice. That’s on my mod list for 2019 Harley 48.
Nice job
Ok Ur a lucky dude .... wow. That blade ! so close so many times !
looks much better man well done
Thank you!
How did you run or hide the rear turn signal cables? Good job.
I use my helmet while grinding too haha
looks like it's gonna be good mate I can't wait to see it done :)
I can't wait either!!
What kind of primer and paint do you use?
Hope you get this. Did you lower your bike or is that the stock ride height?
awesome job, I love it!
excellence! 😍
Filip Karaś thank you!
j garde t'as vidéo dans un coin pour quand j'achèterai la mienne 👌
Je vous remercie!
When you were struggling on the drilling the pilot hole, I am thinking to myself he must not know they're wood drill bits (aka not used for metal).
Or a punch at minimum.
Lost me when it took you a half hour to unbolt a quick release rack and remove a seat 😳
tyee4u lol I'm just testing your patients
What seat is that one? Looks nice!!
Jesus Mercado thank you! it is a mustang solo seat!
what's the intro song that is like 10 seconds long?
Great job looks cool!! Question , why the giant solo seat?? Try some 6” risers with the stock bars. Keep up the good work!!!
the seat looks dumb.
Not bad
But not very good
It's hard to watch with that club music... made me want to sell my bike
Redwood Penguin Club Its called turned the volume off.....like I did. Lol
Rofl 😂😂
LOL xD
hahaha fuck thats crackup
Man u took a perfectly good looking bike and made it even COOLERER LOOKING. Looks nice and clean too.
NICE Dude...so this was few years ago and i imagine you been riding it SO does it throw crap all over you?? i see that happens alot so im trying to figure where to cut mine at...Thanks Man
After chopping it off can you still install a backseat for a back passenger.
#Help
I saw you using your helmet while grinding and I though " what a genius" .... then I saw you using a dremel with no protection at all and changed my mind.... but seriously, nice job on the bike... but you know, you can't ride if you are blind. ... just saying
Motovlogger, Bike Mechanic, Electrician....Damn bro. What can't you do? lol I was actually nervous watching this, but it looks like it came out pretty good. Nice job!
BxPolymath lol is all thanks to UA-cam vids:D I was super nervous as well, the paint that I bought doesn't even match and it made me so angry! but other than that it turned out okay!
TheAlienBeard Yea I saw that it was a bit off but o wellz looks good enough
@@TheAlienBeard Hi there. May I ask, how many inches did you measure from the end of the fender to your cut line?
Also, how did you know how to cut your angles on the fender? ANy other info would be helpful as well. Thanks
nice look, but first mud puddle you hit is gonna get you one of those old school racing stripes. the bikers i hung around as a kid in the fifties used to make fun of each other for making their fenders too short. so you're in some good company. it is a nice look though...........oh yeah, get some mufflers on those pipes, my dude. v-twins need back pressure like the flowers need rain. --old dude.
this is some dodgy as hell stuff
Hoping to be getting an Iron soon, and your vids aren't helping the itch I'm having. Great work on these vids, man.
russbrochill thank you so much man. good luck on the iron!!
what tail lights did you use after you did the chop??? i'm trying to do this to my Iron over the winter!
glad to see a young guy (i presume a millennial) not only riding a Harley but also working on it...
Looks really low budget and quality fab work. The kit I saw was better and it wasn’t up to my standards.
Kudos for doing it yourself but you could have done way better in my opinion.
Also, taking 30min to take off the seat when it takes literally 30sec to do (including taking out the screw) is a testament to this guy’s knowledge of Harley’s 🤦🏻♂️
Sorry, I know this is an old video, but I have a question. Did you reattach the fender and the lighting through the same hole in the strut?
That's a diamond stone and concrete cutter on the grinder, not a metal cutting disc. In flip flops.
All that plus the music... Can't continue
Hello, good work!
What paint did you use for the fender?
Thank you
I noticed that your fender is really close to you tire. How did you get around it not rubbing your tire when you hit bumps due to spring compression?
Kinda wish he would be explaining stuff and not have fukn music blasting
I just want to know why you're using a Masonry cutting disc cutting steel
bel lavoro fatto con il culo non si tagliano i fender con ancora su il parafango non si usa lo smalto delle unghie per ritoccarlo non si mette il nastro adesivo per isolare i cavi e in fine il sellone che hai usato non centra un cazzo con il resto .A dimenticavo e la targa dove la mettiamo ?
Since you dropped the rear fender so close to the tire and kept shocks not struts, does your rear tire hit the fender at all?
Now your gonna get dirty water and rocks slung at the back of your head!
Looks awesome! Nice mod
Moto Bob thank you!
30 mins to remove the seat? cuts through the fender support with the fender on. At 2:50 he fully removes bolts, that plastic peice slides off when the bolts are loose.
He cut through the fender spoort and the cover over it only on one side. Fuck everything about this video.
What makes a person go “ yeah that be a good song for this video”
You will never have a clean T shirt again.....
DO YOU CHANGE THE LIGHTS OR USE SAME STOCK ONES ?
what if it rains if fenders like that bro
nice video, just I would like to see a few more seconds the final result, but looks fine to me. greetings from mexico
Lalo Alemán thank you man! more coming soon.
can you still have a saddlemen and have a passenger?
great bike, shitty music. lol
I did nearly the same to my '86 FXR a few years back. I love the bobber look. Well done, man, well done. Keep it up.
Me too! Thank you! More vids to come.
Multi use motorcycle helmet, love it
Looks great, do you remember what type of seat you used, I'm trying to find a good solo one for 883
thank you
Did your sister pick the music?
What kind of black paint is that?
Very nice, are those oem bliker? what tag kit is that. What did you use the jack for, removing shocks?
Is the reason you are doing rewiring is simply because of the length? Or were there other reasons requiring you to do so?
As good of A job as you did, I could NEVER take A grinder to my Sportster !!
did you cut the frame on the sides..?..so if you want to buy a new fender and put it back to stock..can you??
You did all the work yourself? Thats awesome man hell yeah!
Well done, brush off the nitpickers. I appreciate you showing the finished look.
Where can I get that seat?
Music, goddamn music
So now your rear brake light are the blinkers ?
Yes they are, they work fine except my ground wire came off of the left side.
haha that made me laugh man. It is precisely like the no helmet law is what youre saying;)
No music please
Great video. I couldn't see, but do you still have a light on the plate?
What seat is that
I won't one
congrats on not having a girl ride it (guy in your case) and having the paint look like crap at 7:48. Let me guess, you can buff that out? That paint you will never get that out.
Bob Davis honestly I didn't understand that comment at all:)
Music bad
Dude awesome job but I've got a question. The fender is attached in the same place it was before but the gap with the wheel is like 1cm. I don't understand how the suspension is going to work after it. Like is it not going to touch the the wheel now?
The wheel needs space right? Is the fender going up with the wheel now? And if it is, how you did it?
Gonzalo Simon the only thing that happened is the fender got tilted up in the rear so I had to get longer shocks for the bike! thanks for the comment!
man, buy some EPI glasses instead of spoiling your helmet
damn that is looking good.
Fail
sweet bike mate, check out my bike you'll like it u have a SUB here cheers
ChiCitySoul thank you! and sounds good!
ChiCitySoul thank you! and sounds good!
Welcome don't forget to SUBSCRIBE bro
🔥
i want a bike so badly
cool kid what's stopping you man?
TheAlienBeard money not enough but found one for 400 on crags gonna check this weekend
cool kid good luck!
TheAlienBeard thanks
So basically you cant re install the fender?
damn fine job my Man. love how it turned out.
Roadhand Viking thank you!
There was a cut you made that you didn't show on your video huh
Did you drill a hole to relocate the stock signal lights?
Hell yeah mate, a top job there! Always liked the look of sportys fender chopped like this
Carmo Motovlog thanks man! glad you liked it!
yeah, i thought he did a nice job chopping that fender
Lol at first I was like this dude really
😂great job bro
We're the holes you drilled to make the fender sit lower?
good job man
Thank you!
Nice and simple fender chop... makes it look easy :) I am gonna do mine soon too.
I thought the stock shocks on iron 883 was 13"? I replaced my stock with some black Stubby 11.75" shocks and the bike dropped 2 inches. Did not hear any scraping so far and lovin the low ride. The bottom clearance is affected though and that means more scraping :(
Joshy George thank you man! I think I had the superlow so mine were 11"s I think!
Welcome Benjamin :)
Whats the name of that seat?
Joshy George mustang solo seat!
Where did you buy the seat brackets?
Too many mods ruin HD resale value
Great job !!! Bike looks sick...
what kind of lights are those?
Looks great!!
mopman311 thanks!!
Looks awesome Bro Ba Fet! Clean!!!
I'm not really into the bobber style look, but I do have to say that you did a hell of a job there
TxGamer13 why thank you:)
Nice job! What seat is this?
I want to put drag bars on mine
Bro much love and respect for doing this all by yourself! Wanted on of these bikes for years =)
ManCave213 thank you sure! much appreciated!
Good Job Mate!
dangit! i've watched 3 of your videos and i already want an 883
Rebel Rider - Chris why thank you man! it's an awesome bike