#4 Main Tool for Shipmodeling - TABLE SAW - Demonstrations of Byrnes 4-inch Table Saw
Вставка
- Опубліковано 21 сер 2024
- #olhabatchvarov #shipmodelersworkshop
I came to this machine after 10
Years of experience with similar tools and I can confidently say that though other manufacturers’ products were suitable for one or other type of work, the Byrnes table saw can do everything you need it to do. I have been using it for two years now and would like to show you its capabilities...
*******************
У цьому відео я демонструю 4х інчову настільну циркулярку Бернса. Я прийшла до цієї моделі за 10 років досвіду роботи з подібними станками і можу впевнено сказати, що попередні моделі були придатрні для якогось одного виду робіт, а я хотіла знайти все в одній і я її знайшла! Два роки я вже користуюся Бернес модел маншин і хочу показати її в роботі...
🎞#1 - Rotary tool:
• #1 Main Tool for Shipm...
🎞#2 - Soldering Iron:
• #2 Main Tool for the S...
🎞#3 - ROPEWALK:
• #3 Main Tool for the S...
🎞Cutting planks to uniform thickness with a Table Saw:
(Калібрування рейок на циркулярці):
• Cutting planks to unif...
💡Ділюся досвідом з вибору і експлуатації циркулярок на своєму сайті:
My experience in choosing and using table saws:
www.shipphotog...
⚓️4'' Table Saw - Byrnes Model Machines:
Замовити можна тут 4'' Table Saw:
www.byrnesmode...
Delivery in almost all corners of the world.
Доставка є майже у всі куточки світу.
🔴Channel's main page:
/ olhabatchvarov
🔔Subscribe to the channel - not to miss any issue:
/ @olhabatchvarov
💰You can thank me for this work in the form of "LIKES" or become a member of the channel here:
/ @olhabatchvarov
🔥Official channel website:
www.shipphotog...
📨Contact me:
www.shipphotog...
⛵️GALLERY of my models:
www.shipphotog...
#perfektworkshop #shipmodeling #shipmodelbuilding #modelismonaval
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
🔥Thank you very much for your comments! 🔥I appreciate them all! I will answer everyone in the following order: comments from sponsors; comments that contain questions and the rest... I try to do it as soon as possible, but every day more and more of them)))
Keep in mind that UA-cam blocks comments with links, so I always leave them in the description under the video!
****
🔥 Щиро дякую за ваші коментарі! 🔥Я ціную їх усіх! Я відповім всім у такому порядку: коментарі спонсорів; коментарі, які містять питання і решта... Я намагаюся зробити це якомога швидше, але з кожним днем їх все більше)))
Майте на увазі, що UA-cam блокує коментарі з посиланнями, тому я завжди залишаю їх в описі під відео!
today arrived my 18-inch table version of this saw. Probably the last one you can buy. I've never seen such a beautiful tool ever.
My Brynes saw is an heirloom tool, as well as the disc sander. Wonderfully precise tools.
I own one of these Byrnes rotary saws. A great video. Thanks. Many things answered about how to properly use it. Been look for a how too do video for over a year.
Glad I could help
Vielen Dank für die Vorführung der Maschine .
Diese Säge kann eine Menge Dinge sehr präzise.
Aber ohne den Menschen der sie bedient und über grosse Erfahrung verfügt kann die Maschine nichts.
Viele Grüße alles Gute
Frank
Замечательный станок! Завидую! 👍👍
Machined ultimate precision . Fantastic show of unique skills.
Thank you!
Your table saw is the dream of all modellers and it feels good in your videos that you love it with good reason.
Wonderful machine!
Thank you very much!
It's just really my favorite power tool.
What a lovely tool to own!
TYVM for posting !!
My pleasure!
Buongiorno... veramente brava a spiegare tutto benissimo senza una parola.... complimenti 😀
Класна пилочка!! Завтра приїду і піду купувати весь ручний інструмент і зразу подивлюсь де можна таку купити)
Дякую за відео, ви молодець!!
Я рада, що вам сподобалося!
В описанні під відео є прямий лінк на неї. Колись доставка в Україну була 80$ але це до всіх цих нових законів про розмитнення - не знаю як воно зараз... Здається вже при в їзді в країну ви дізнаєтеся скільки % буде податок, коли вам як би вже діватис нікуди, якщо хочете отримати посилку...
@@OlhaBatchvarov дякую, цю пилочку я куплю коли побудую декілька малих моделей, поки що попробую без неї або пошукаю на фрі маркетатах, там дуже багато майже нового інструменту і дуже за дешево.
The power and prosicion of of this saw is excellent. Thanks.
Excellent video especially for beginning modelers because it shows what can be done with a good saw and patience plus techniques and safety.
Thank you!
Glad you enjoyed it
Merci pour cette belle démonstration. J'utilise cette scie depuis un an et vous m'avez fait découvrir des fonctions que j'ignorais. Vous êtes fantastique!
Merci!
I have this table saw from some years..... It's the best!!
Nice vid on Jim’s saw. We’re (my son and I) long-long time owners/users of Jim’s saw. As well as his thickness sander and circular sander. Can’t say enough great things about ‘em. Very satisfied customers here 👍👍
As always, YMMV, just sharing, nothing more, nothing less.
Thank you very much!
Круто!!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Thank you so much. Your video has been incredibly helpful.
Glad it was helpful!
In succession I have owned three other machines over 40 years. All were toys compared to the Byrnes I now have for at least 5 years. Worth every penny and built like a brick house! Will outlast me and is an absolute joy to use.
I agree with your every word!
@@OlhaBatchvarov Thank you for taking the time to present all of your informative videos!
I also have his sander and it is also very heavy solid machine
Great tool thanks for the review 👍
Looks like you get the maximum out of it! A suitable tool for your skills! Thanks for showing!! 👍
You convinced me 👍I will buy one complete set.
I'm afraid you won't stop at one)))
That looks like a very well made machine. I am impressed
It is!
Ух! Классная штука! :-)
Very nice!
Thank you!
Оля, ти робиш неймовірні речі ... КРУТО!!! Як завжди здивувала і дуже зацікавила, дякую за насолоду спостерігати за тим, як ти працюєш...❤️
Я рада, що вам сподобалося!
Great presentation Olha, that’s an impressive saw.
I am amazed that you can manipulate a piece sideways across the saw blade. Wow. I asked Jim Byrne about a dado set for my saw but never got a reply. Your work around is impressive!
I know that Jim always has a queue for these table saws and maybe he just doesn't have time to answer letters...
Very nice saw. I didn't know table saws were available in this size. I enjoy your videos.
Olah just finished watching your video. Absolutely ❤ love the equipment and the tool's 🔧 that you work with Olah.
And I hope 🙏 that you do have all the necessary safety equipment, safety glasses and earmuffs.
I'm glad you liked it!
Yes, I use glasses all the time. And there is no need for headphones - it's a very quiet saw, even my vacuum cleaner works twice as loud as it...
@@OlhaBatchvarov thats good yea my vacuum is a little to loud to Olah. Glad that you do use safety glasses.
I do use safety equipment for my work to.
It is essential for safety. Better to be safe than sorry.
Very nice saw and you’re a skilled operator.
AWESOME !!!!!!
Thanks!!
Impressive!
Thank you!
Thank you Olha, this is a great video, I own the saw and couple of other Jim tools and starting miniature wood work, this is very helpful for someone like me who does not have woordworking background and starting to learn using these tools, I wold love to see more video on how you are using the machines and can be done with them. I apprecieate this thank you.
My pleasure!
I usually show it in the videos when I do something on the models...
nice
I ave the Proxxon one you show at the beginning, but that looks like it steps up a level, interesting to see how it lasts. Great video as always
This is really a hell of a table saw Olha, I am absolutely impressed with it! This is a great tool to have indeed :o
I agree!
This is the best I've ever had!
I have his disk sander, amazing tool!
This video really shows how amazing this saw is.
I was saddened to hear of Mr Byrnes passing recently :( It seems there is no other machine like this, ... plus it's somewhat affordable RIP
Yes, it was very sad news! No manufacturer is able to provide the high level of accuracy required in ship modelling, which we had from Jim...
谢谢！
Nice
Thanks
Very nice saw. Makes me wonder if I could mill that small stuff with my big saw. You never cease to amaze. Please tell me you don't make your own adhesives at this point it wouldn't surprise if you did. lol
Thank you very much!
On large saw it is a bit dangerous to do what you can on a small one. I used to work as a furniture designer and experimented a lot with bent details that my masters made on a large circular saw - I saw sometimes dangerous moments and it's good that no one was injured...
La fabrication est finie suite au décès du créateur. J'ai découvert trop tard son bijou. Une belle création.
Il y a encore de l’espoir qu’il y ait quelqu’un prêt à poursuivre cette petite entreprise !
You can still order this tool. Mine is being delivered today.
Olha, muito boa está serra, inúmeros recursos, me pareceu resistente. Diria que chega a ser um equipamento profissional. Gostei muito dos exemplos de uso . Muito bom.
Obrigado!
Esta é uma ferramenta muito boa e de qualidade. Eu uso não apenas na modelagem)))
That has to be the best demonstration of a table saw ever !!! Do all the accessory bits come with the tool or are they extra ? I think I'll have to save up and get me one of those beauties.
Thanks for a truly brilliant demonstration video. I hope the machine manufactures paid you for it, because they should have done. Cheers.
I'm glad this video helped you! Yes, I chose the components of this table saw as I needed it. This is really a very nice feature - you only pay for what you need, not for the full package...
I made this video for modelers, so I'm not even offended that I didn't even get a "Thank you" from the manufacturer.
***The Ultimate Video For The Ultimate Best Modelers Table Saw***
--- B R A V O ---
Thank you for show this video; is an amazing machine I would like to have one for myself, where can it be bought?. Regards!!!
Link in the description under the video!
Olá : Olga , sou seu fã e admirador de seu Trabalho e sua Arte , preciso saber de Você , onde comprou essa maravilhosa mini máquina : Multifuncional , tem como enviar-me ; Link ? No mais , muito obrigado e Parabéns pelo conteúdo do Canal , um Forte Abraço .
Obrigada!
O link está na descrição abaixo do vídeo, o UA-cam bloqueia comentários com links...
It looks like a very nice saw, much more robust than many small table saws. I'm curious why the blade appears to be out of round, which I know it's not? Does the blade not fit tightly to the arbor shaft so when you draw down on the arbor bolt it's possible for the blade to be off-center?
For my large table saw, Saw Stop, I purchase blades with the arbor hole that fits the arbor to keep the blade from presenting out of round when running.
Just curious, it seems to work fine otherwise.
Apparently this is some kind of illusion created by the lenses - the blade is exactly round!
And yes, this is the best table saw I've ever had!
Bonjour Olha
Je suis allée sur le site de Byrnes. Je me pose la question. Quel type de lame faut-il acheter ?
Celle vendue avec la machine est-elle ok ?
Quels sont les accessoires qui te paraissent indispensables ?
Merci encore pour le mal que tu te donnes pour nous faire profiter de ton expérience. Je regarde passionnément tes vidéo dont j’ai réduit la vitesse pour ne rater aucun détails.
🥰🥰
Bonjour à tous!
J'utilise ce qui est inclus dans le set + un supplémentaire pour un travail soigné (3in. Martindale 90T-.03 kerf)...
@@OlhaBatchvarov thanks. And I forgot : 12 or 18 inches ?
Happy New Year🍾🍾🥂🥂
I have been searching for this saw, but with Mr. Brynes passing it seems they are not taking orders for the table saw. Is there another source?
Unfortunately, Jim was the only one who could create such a high precision table saw!
Do you know of any other source for this table saw...it's a real shame his awesome saw is no longer available...😢
Hi love your videos I am a beginner carver interested in building kits were you suggest to buy one to start .
and could I start with a proxxom scroll saw
You can search in local model stores or online directly from the manufacturers' websites (virtually all of them have worldwide shipping). You don't even need a saw to build from a kit. But for real modeling, proxxon is not suitable. You need to spend as much to improve it so that it becomes possible to build models. Then it's better to buy a Byrnes table saw - you can work on it right out of the box...
You always have great music in your videos. What is this Tune?
Thank you very much!
I subscribed to the artlist(dot)io
Gracias por el video, sería posible saber si esta sierra se comercializa en Europa ,o donde se puede comprar ?.un saludo y gracias
¡El fabricante tiene envíos a todo el mundo! El enlace está en la descripción debajo del video.
Оля, здравствуйте! Поскольку я владелец проксоновского FET'а (и не очень доволен этой пилой - точнее сказать, моим экземпляром из-за его недостаточной точности), то я был-бы признателен Вам за ответ: подходят ли пильные диски Proxxon c их посадочным диаметром 10 мм к пиле Джима Бёрнса с её Blade Arbor 3/8", не влияет ли этот небольшой люфт из-за разницы в диаметрах на пиление? Спасибо.
У Джима можно заказивать втулки под фрезЬІ. Но зачем под Проксон - их фрезЬІ безтолково дорогие? Я наоборот думала как под проксон вЬІточить втулку 16мм. Ето не только ваш екземпляр такой! Если в ФЕТ не вложить еще как минимум столько же сколько она стоит - точности от нее вЬІ не получите. Етот станок бЬІл спроектирован для изготовления кукольнЬІх домиков, с чем он вполне справляется. А для моделизма нужна ТОЧНОСТЬ чуть ли не в микромилиметрах! Я на свой станок покупаю фрезЬІ MALCO по 12-20$ за штуку, но они в инчасх 1/2" - ето 12,7 мм. У меня стоит втулка под ети фрезЬІ. Можно написать Джиму в обратную связь, спросить есть ли у него возможность сделать под проксоновские фрезЬІ!?
@@OlhaBatchvarov Спасибо за столь быстрый ответ, Оля! Поскольку я обдумываю вопрос приобретения оборудования Джима, я было подумал - ошибочно конечно, что фрезы Проксон, несмотря на разницу в диаметрах с фрезами Джима в 0.475 мм, можно установить на пилу Джима без специальной втулки. Конечно, я не стану заниматься подгонкой пилы Джима под фрезы Проксон ради нескольких имеющихся фрез - это нонсенс. Спасибо еще раз.
Yes if only I had the $750AUD plus postage to spend on one....and that's if the USA opens up post to Australia again. Its been shut down for nearly a year "due to COVID"?
Yes, it's not a cheap saw but it's worth every cent! Someday this COVID will end, I hope...
Hello can you please tell me the weight and price of t Jum Byrnes 4 miniature table saw?
Unfortunately, Jim Burns died in the summer of 2023 and his business is frozen...
The tool is heavy and therefore very stable (especially for me since I don't lift anything heavier than 6 pounds due to back problems...) but I won't weigh it...
Watch your fingers!
Thanks! I will...
Hello, thanks for the video, I sent an e-mail to the company on the website, it's been 10 days, and I still haven't received any response.
Jim Byrnes always has a queue, at least two-three months in advance! So be patient - this tool is worth it!
Please let me know if you will ever sell thank you.
Unfortunately, the manufacturer died and now these tools have become priceless!
That Table Saw sells for over $400.00 USD. Nice to have, but....
Considering how much money I threw away on all the previous ones - this table saw is not worth half that amount! And its capabilities exceed all previous combined...
Приветик,да пила не плохая.Но цена в 1000 баксов с аксесуарами,без них она по своим возможностям сравняется с любой за 100-150 баксов.У нее нет наклона диска,постоянно чтобы выполнить какую нибудь другую операцию надо что-то открутить прикрутить.По точности пропилов все отлично.Пытался найти что-то похожее,не нашел.
У меня бЬІла и китайская тоже - ВЬІброшеннЬІе деньги на ветер - она даже готовЬІе плашки распустить на рейки не может без напряга - грЬІзет и жжет... Вам надо попробовать в работе Бернса что б оценить, что она стоит каждЬІй свой цент!
Hello im from greece. Can you send me a link or anything else where I can find this tool??
Hello!
UA-cam blocks comments with links, so they are all in the description under the video...
@@OlhaBatchvarov thanks a lot i will see again the video.
Hello. How much this machine?
Approximately from $500, depending on which components you choose...
Estamos como siempre yo lo que quiero es escuchar el sonido de la máquina y no esa mierda de música que me pone de los nervios.
¡Este no es un canal para amantes de la música!
On peut toujours couper le son
Хорошие мини станки, это вещь. Но дорогиииие. Ужас.
Потратив кучу денег на дешевЬІе - я могла сразу купить ВЕЩЬ и не мучаться 10 лет)))