PROXXON MICRO Mill MF 70 with accessories - UNBOXING
Вставка
- Опубліковано 30 вер 2024
- #olhabatchvarov #shipmodeling
⚓️PROXXON MICRO Mill MF 70 in the USA: amzn.to/4dsRTVe
⚓️Dividing Attachment for MF 70: amzn.to/3Y2ejbF
⚓️Precision machine vise for MF 70: amzn.to/47OrU9K
⚓️Milling cutters, 3 pcs. (1/32", 5/64", 7/64"): amzn.to/4eHyMrK
⚓️Set of Tungsten carbide cutters, 2 pcs.: amzn.to/4eJ4Rzr
⚓️Router Bit Set, 10 pcs., in wooden box: amzn.to/4047YOv
⚓️HSS twist drill set, 10 pcs.: amzn.to/47VfJrS
I can't say that this machine is one that you can't do without for building model ships. But it can do everything faster, more accurately and better than manual work with a file or a manual drill. It is intended for modelers who are ready to move to another level of modeling - the level of professionals...
💡All videos about the WORKSHOP&EQUIPMENT in the PLAYLIST:
• Perfect WORKSHOР
🎞Main Tool for Shipmodeling - TABLE SAW - Demonstrations of Byrnes 4-inch Table Saw:
• #4 Main Tool for Shipm...
🎞You can find all my built models in this PLAYLIST:
• Full build-logs with m...
🔴Channel's main page:
/ olhabatchvarov
💎Souvenirs for channel fans:
/ @olhabatchvarov
🔔You can thank me for filming and editing this video in the form of "LIKES", clicking the "THANKS" button under the video or become a member of the channel here:
/ @olhabatchvarov
🔥Official channel website:
www.shipphotog...
📨Contact me:
en.shipphotogr...
⛵️GALLERY of my models:
www.shipphotog...
🇺🇸🇺🇦
I like that you are wearing Proxxon green!
That looks a nicely precision minidrill set. when fully mastered it will become the ideal tool to go to. Thank you for the review
My pleasure!
Great! I was looking for something like this tool - it's hard to use minidrill because of the tremor in hands...
Yes, with this tool, drilling will become very precise...
You’ll enjoy having this in your arsenal of tools! A couple things you can do to improve accuracy: The cross feed table mounting holes are oversize which allows adjustment to true up the table to the spindle. Put a small bar, end mill, upside down drill bit etc in the collet chuck, and crank the table (X travel) to one side and adjust so the side of the inserted bit is in the T-slot and close to, but not touching, either side of the slot. Now travel in the opposite direction and watch the clearance between bit and slot to determine which way to move the table to true it up. This is a rudimentary approach, but it’ll get you close enough. Or you can buy a dial test indicator and use it in place of the bit to get ultra precise! Also, square the vise jaw (using the rigid jaw) the same way when mounting it to the table. If you’re lucky, after truing up the vise, you may find that the vise base is dead square with the table front, so future mounting of the vise after removal can be done with a square! I’m really looking forward to your using this machine and reporting your haughty in the coming months! I have a Sherline lathe & mill and love both!
Thank you very much for the tips!
the table only needs be parallel in an axis the bed is true fore and aft for metals that clock method is eliminating the last few hundred microns 🧭
Really happy to see this tool in your hands! Proxxon has the small 1 2 and 3 mm tungsten carbide end mills. They are extremely sharp and very very good for wood 🪵
Thank you!
Very nice machine! I can't wait to see what you create with it!
Very soon!
Impressive machine. Proxxon does make nice precision tools. That divider will serve you well. Enjoy !!
Thanks 👍
Nice toy !!! If you can afford it.
I've been dreaming of buying this tool since my third model and finally I have it...
That·s perfect !!...
Thank you!
👏💖👍💕🎁
Je déplore simplement je n’existe pas de Mandrin automatique pour leur perceuse.
Je ne savais même pas qu'une telle chose existait
@@OlhaBatchvarov oui pour la dremel et c’est hyper pratique. Malheureusement on ne peut pas adapter celui de la dremel sur la Proxxon
Du coup j’en ai acheté une et je ne m’en sers jamais
👏💖👍💕🎁
Nice.
Thanks!
Nice! I can’t wait to see it in action!
I am still collecting videos on this…
Very nice tool, you will love it!
I love it!)))
5:24 secure to bench somehow 🗜️
I don't want to make a holes in the bench, but I plan to make a stand for the mill itself, which can be clamped to any table
@@OlhaBatchvarov I've a pasta maker and over the years the clamp that secures it to the overhang on a unit is away somehow but is to be used as it is hand cranked; woodworking is less force on the workpiece mostly but safety is a must still to me I've never seen a mill on a pillar drill stand it's interesting though so please show us however you decide to proceed