BTF-LIGHTING: Watch this! You should know SP630E Setup | SPI+5CH All In One Bluetooth LED Controller
Вставка
- Опубліковано 2 сер 2024
- SP630E Bluetooth LED Controller | SPI+5CH AlI In One LED Controller
1. Support PWM LED Strip.
PWM LED strip which has no IC chip. For example FCOB 5630 5730 5050 2835 3528 2pin(V+ V-) 3pin CCT(V+ CW WW) 4pin RGB(V+ R G B) 5pin RGBW(V+ R G B W) 6pin RGBCCT(V+ R G B CW WW).
Monochrome Light and CCT light have no function of DIY light effect.
2. Support SPI LED Strip.
SPI IC Chip LED strip. 3pin(V+ Data GND) or 4pin(V+ Data Backup GND).
For example WS2811 WS2812B WS2813 WS2814 WS2815 SK6812 LB1934 IC chip etc single color, CCT, RGB, RGBW, RGBCCT addressable LED strip.
Not available to support SK9822 WS2801 etc. Data+Clock LED strip.
Monochrome Light and CCT light have no function of DIY light effect.
Here is BTF-LIGHTING, if you like this video, please click the like, forward, and make a comment.😊
Our Homepage🏢:www.btf-lighting.com
📧Service e-mail: support@btf-lighting.com
📩Cooperation e-mail: influencer@btf-lighting.com
US Amazon link :www.amazon.com/dp/B0BPCH695M
CA Amazon Link:www.amazon.ca/dp/B0BPCH695M
DE Amazon Link:www.amazon.de/dp/B0BTYJQDNB
UK Amazon Link:www.amazon.uk/dp/B0BTYJQDNB
IT Amazon Link:www.amazon.it/dp/B0BTYJQDNB
FR Aamzon Link:www.amazon.fr/dp/B0BTYJQDNB
ES Amazon Link:www.amazon.es/dp/B0BTYJQDNB - Навчання та стиль
how do I connect multiple sp630e to one remote controller? tutorial? also does this work as well with the SP636E?
Which remote do you use ? You can contact us contact@btf-lighting.com and send us your order ID . We can send you a teaching video
Hi! Can I control the strip by segments with the help of this controller (for example: 3 m - one colour, 3 m - another colour)?
yes, you can . 3m LED strip ,you need to know the IC QTY , then use DIY mode set these IC QTY one color . For antoher 3m , you also need to know the IC QTY and make these IC one color . Any product question , please feel free to contact us support@btf-lighting.com
Si guardo una configuración de color e intensidad al apagar y encender el controlador de la red eléctrica mediante un enchufe ¿recuperara la configuración anterior a la desconexión de la red?
yes
Quindi se ho capito bene con il pannello remore posso gestire 4 controller sp 630 e e poterli gestire?Posso accenderlo e spegnerli singolarmente a mio piacimento?
Yes ,you can control each zone individually or controll all the zone at the same time . If you only control WS2812B RGB LED strip light , you can use SP638E controller ,SP638E only support one addressable RGB LED strip light , but it support APP group control and RF remote group control . SP630E can support all kind of LED strip light , but it can not support APP group control ,only RF remote group control .www.amazon.com/gp/product/B0C3QZRVZJ?th=1
Hola muy buenas una pregunta. Me puedes decir cómo conectar este controlador con las ws2815 me seria muy útil un esquema por favor muchas gracias
SP530E VCC connect LED strip +12V , SP530E DAT connect WS2815 DIN , SP530E GND connect WS2815 GND , SP530E GND connect WS2815 Backup data .
I have WS2812B LED strip and a 5V power supply...cant seem to get lights on. Any suggestions...thanks
We need more details , LED QTY ,Power , Length of LED strip ,can you tell us your order ID and contact us support@btf-lighting.com ?
Can I add (2) 24v light strips to same controler?
Yes , you can . Total current is less then 6A .
While the BanlanX app v2.5.5 does support SP630E in Device mode it does NOT support SP630E in the group mode. The device does not appear as a choice in the list. Please fix. TY
SP630E doesn't support APP group control , only RF remote group control . Can you contact us support@btf-lighting.com and send us your order ID .
The reason we set it this way is because we are concerned that customers may have multiple SP630E, but each SP630E uses a different type of LED light strip
Does this mean I cant control multiple SP630E controllers from the one app?
Hi. I have a digital rgbw strip connected to VCC, Data, and ground. But it only lights up blue, cant change the color or turn off. Can you help?
Try running a ground from the power supply (-)to the controller (-)
1. What power supply do you use? Can you tell us your output voltage and output current?
2. Can you send me a HD video of the light strip project? The video can show us your power supply connection ,controller connection and LED strip connection . A large and detail video can help us to find the issuse reason quickly .
Send us a large video : wetransfer.com/ our email address is support@btf-lighting.com
3. How many LED did you control ? We need to calculate whether the power supply is sufficient
4.Please also send us your amazon order ID . The order number is an important basis for us to provide after-sales service.
@@garylow8668 Thanks for the reply. Right now the power supply is connected by vcc and ground to the controller, not the single 12v
@@BTFLIGHTING Hi, thanks for your reply.
1. Power supply is 24v/6.3a
2. I sent the video with title of @henryryh6577
3. The strip is only a meter long, just to test the strip, I tried it with a longer strip but had the same issue.
4. I didn’t order this strip so cannot find it yet at least.
Thank you very much for your help!
What if i want to extend the rgb light
Which kind of rgb led strip ? PWM or SPI ? You can contact us suppoort@btf-lighting.com . If it is PWM RGB , you need a signal amplifier , if it is SPI RGB , you need extra +V -V wire
Può gestire 4 zone di ws 2812 con diverso numero di led e poterle accendere e spegnerle singolarmente?
Yes ,you can control each zone individually or controll all the zone at the same time . If you only control WS2812B RGB LED strip light , you can use SP638E controller ,SP638E only support one addressable RGB LED strip light , but it support APP group control and RF remote group control . SP630E can support all kind of LED strip light , but it can not support APP group control ,only RF remote group control .www.amazon.com/gp/product/B0C3QZRVZJ?th=1
@@BTFLIGHTING Ok grazie.Quindi visto che a me servono 4 zone dovrei acquistare 4 SP 638 E?E quale è il modello di telecomando che mi permette di gestire tutte le 4 zone?
Merhaba 15 metre ws2811 15 metre beyaz 15 metre gün ışığı şerit Led bağlasam hepsini ayrı ayrı kontrol edebilirmiyim
every time you only can control one kind of LED strip light , like you can control all the WS2811 LED strip light at the same time . But you can not control SPI WS2811 + PWM single color LED strip light at the same time
BS 146 color modes. i dont even get 20 color modes from SP630E. The color gradient sucks. Only 7 colors??? Why do i buy RGB lights when it only uses 7 colors? wtf? also the gradient is not smooth at all.
146 color modes is for SPI RGB LED not for PWM RGB .
The dynamic lighting effect of PWM RGB LED is inherently limited, which is determined by the nature of PWM LED. PWM RGB cannot have so many dynamic modes, which cannot be compared to SPI RGB LED.
The app also provides color palettes, and you can choose the static colors you need
This controller is great, but the app is HORRIBLE. When you open the app it defaults to one randomly selected controller/light, so if you always use a group you have to leave the default controller/light which is random, confirm you want to leave it, then select the group you want to use most of the time!!! It takes 10 or 15 seconds, many presses EVERY TIME. PLEASE add a setting for a default light or group to be loaded on app start every time!!
And while there is an option to use White and Color LEDS simultaneously, it ruins the color control!
If you select the White and RGB simultaneous option in the settings you can no longer have the White turn all the way down in color mode, so if you select a fully saturated color, it's never a pure color, there's always white light mixed in! If you select a fully saturated color in this mode it should dim the white LEDs all the way off! As you select less saturated colors the white light should be mixed in proportionally and when you select fully unsaturated the white LEDs and all color LEDs should all be at full brightness. And with this White and RGB simultaneous setting selection if you are in white mode, the RGB is not used to get maximum brightness. Ideally in white mode the RGB should be used with the white LEDs and be used to assist the selection of warmer/cooler white light and give maximum brightness. Ideally there would be settings to calibrate color, so RGB LEDS would be used in the correct amounts to assist cooler and warmer white lighting without adding unhelpful color tinting.
I would love to wake up in my RV to slowly brightening lighting. You should add the ability in the Android app to set times to turn on, brighten over time, etc.
The hardware is great as long as you do not need to use integration with Alexa, Google Home, IFTT. But the app limitations and poorly thought out designs ruins the experience.
Also, please make a version of this controller that works with just the remote and local bluetooth app control without any internet connection as this one does, BUT ALSO allows wifi control from Alexa, Google Home, IFTTT. This would be a very powerful combination and allow use when off grid, but take advantage of the cloud when that's available!