Cen F450 Goes Brushless
Вставка
- Опубліковано 26 бер 2021
- Converted the Cen Racing F450 to brushless. Testing it out on low speed gearing for the first run on 2S and 3S. Going for the high speed gearing for the next run.
Ready Set RC Merch:
my-store-11592078.creator-spr...
Enjoy the video!
ESC and Motor Combo:
Castle Sidewinder SCT 1:10 ESC paired with Sensored 14 Series 4 Pole Motor 1410 3800kv
This was purchased a while back for another setup but I sold that RC😊
#CENRacing #CastleCreation #F450
so many different routes one could go with this truck ....nice brother
@ShadeTree RC Thanks bro! That's my thinking. I've seen solid axle MT's, on-road trucks, drag trucks, tow setups for crawling and crawlers.
What a speed run on low gear!
@ronbernardino Not a speed run as much as testing out what you get with 2S and 3S lipos. Plus I went up three teeth on this. Didn't wan to kill it on the first run since parts are limited.
That truck is a Beauty brother, good run bro
@11 CHARLIE RC Thanks brother!
Very good looking truck 👍👍🛠🛠🤔
@Earl Moorhead I could see people using this as a shelf queen.
I forgot what a slow RC was like😬
-nice rig✔️😁🍻
@Surfside Won't be like this for long. This was only test 1😊
Nice footage bro👍🏻💪🏻
@Apex RC Studio Thank you👍👍
Would definitely be curious to see what it’s like in high gear possibly even dropping the pinion down a little. Would be nice if you could maintain some low speed control but still have a nice top speed kind of make it a do any thank truck however 20 mile an hour is pretty good. Just curious how stable you can make it on either gearing and keep temperatures under control
@Large Scale Life I think I'm going to do a chameleon type project with this. First up though is speed. Next up will be crawling but the articulation is going to be tricky. There is almost none right now which made it good for hooning.
That's got me wandering if there's any overdrive ring and pinion gears that would fit.
@Shannon Vance Oh man you got me thinking😍
It ran good on brushless upgrade bro 👍🏾🦾💯
@Linden Rc 215 Thanks bro, next up the high speed gear💪👍👍
We're you able to transfer the Pinon on the stock motor to the brushless motor? Or did you use a different pinion?
@leeheadley7064 I used a different pinion. the shaft size of the new motor is larger than the size of the stock motor. If you are using the same size shaft between both motors you can reuse the pinion.
Getting ready to add one to the collection 🔥🔥 that blue with them brushed aluminum rims is too cool . I'm not sure what I will due with it ! Can you due me a favor ? Measurements on the body & would the body fit the Reeper/ Colossus . I'll order a spare body for the F 450 thanks bro another dope truck
@just 4 kicks 😂🤣That was the first thing I did when I got, right on the Reeper. Same size maybe a hair longer. Only thing though this is two pieces. It's a little shallow too.
@@ReadySetRC lol yeah 😆 that 2 pice body could be a problem. Not to mention, that big ass Reeper would shred it lol
👍🏾💯
@CoachD RC Yessir💯💪👍👍
Very nice brother. Really dig that truck. I will be getting truck in the near future. Will use it for a towing rig.
@Noeys FastRC This would be nice to pull that trailer of yours.
Locking the rear diff may help alot with side movement under throttle. And maybe a sway bar.
@Shannon Vance I may have to look into the locking the rear diff, just got to see how that will act when cornering. As for the sways, they come on this beauty stock.
Sweet truck. I’m still thinking if I should get one or not 🤔. I would want to put a castle sensored 2200 in it though, just for kicks and giggles. Think it’d fit??
@Peter Griffin You got room of the motor but that motor mount may not be able to support it. I say go to the 1415 motor instead of the 1515.
@@ReadySetRC ok, are you saying it’s just a weak piece of aluminum?
@@Twizztify Not at all. I don't think it will line up with those bigger size can motors.
20mph 🤷♂️ Will be curious to see the high gear setting. It looks great though 👍
@Great Lakes RC I'm thinking a 10mph boost but I can't wait👍👍
@@ReadySetRC That would be good for this truck 👍
3s with the higher gearing should make a bigger difference. That truck has the potential to be fast.
@Shannon Vance Oh yeah this is going to be a rocket on the higher speed gearing.
I use axe550 3300kv 2s 15MPH 3s 22MPH in low gear.
@Blake Wu Nice! Those 550 motors are great performers.
How big is this truck compared to others sharp looking. Good video
@Robert Longley As a crawler, bigger than my 8th scale crawlers. As a MT, I tried this body on my Cen Colossus XT and it fits. The Colossus some would say 7th scale-ish.
how's the heat on this motor. my stock motor Don't like 3s get really hot
@Bob Johnson No issues with heat on the brushless setup. It's so under geared for this setup heat is not an issue.
What kind of app you used for speed check
@Jesus Gordillo I'm using a PowerHobby GNSS. The app is associated with the GNSS. This is the same GNSS as the SkyRC GNSS.
add rockets to make it go fast!
@jdpasl I was thinking more flux capacitor😂
My arrma big rock rc truck does 54 mph on 2s battery 🔋 😅
@leonbrown3dtec990 Not sure how that is relevant to this video but okay🤔