Good information right there. A lot of the time we get caught up in chasing greens and browns that we neglect simple preventive maintenance to our equipment.
first, like the videos, very informative. Secondly, 23P on a 250HP, somebody is running heavy or its under propped, I would expect it to be turning a 25 minimum. Dawn dish soap in the bilge couple times of year in the driveway with a good rinse. Tire pressure gauge that goes to 80 or 100 psi, some only go to 50 psi, tires should be at the maximum pressure listed for maximum load capacity.
For people that own boats with several years on the trailer make sure the rear seal on the axles has not failed...look at the back side of your rims to see if it has grease on it,,if it does the seal is bad and every time you launch your boat water is getting in your bearings and they have a very very short life left when this happens and could even end in loosing a wheel off you're trailer.
How do you prevent accidentally shearing off your bottom end on a shallow gas pipe? Sorry. Had to! My 6yo loves your vids, especially catching those reds. Keep it up! Hope your boat is ok dude!
Good, what about the engine. Maybe oil checks ? Also the trolling motor should be checked for fishing line. Just thinking after watching your video, good ideas. FLC
Brian I greatly appreciate what you do and how you wish the best for everyone! Thanks!
I think maintenance is very important, too!!
Nice information!!
I love bass boat from Japan!!
Wow awesome
Good information right there. A lot of the time we get caught up in chasing greens and browns that we neglect simple preventive maintenance to our equipment.
Great Tips Brian. Great Job!
Good looking out B.Latt!! Thank you!!!
Much respect to what your doing mr latimer. Big big fan and love all the informative videos. One of the few guys doing it right! Keep it up brotha
All good tips I've replaced the bearings on my trailer twice. Thank god I found them before a major problem.
I always like to give it a good tug.. Great info sir!
Great information B-Lat even though I don't own a boat I learn alot from you THANK YOU SIR!!!!!
Nice drone work and good tips...
Thanks BLat, great info!
Preventative maintenance is the best maintenance....👊🏼👊🏼👊🏼
I needed this. Thank you
Great stuff as always. We don't like to see you in for catastrophic problems either!
Guys... good advise there!
Nice boat tech B. 👊🏿
Great job Brian!
Good info B. The fact that folks disliked this video proves you can’t please everybody
Class Act B Lat!!!!!
Great advise... I hate a dirty bilge..
There are a lot of nice boats right there.
first, like the videos, very informative. Secondly, 23P on a 250HP, somebody is running heavy or its under propped, I would expect it to be turning a 25 minimum. Dawn dish soap in the bilge couple times of year in the driveway with a good rinse. Tire pressure gauge that goes to 80 or 100 psi, some only go to 50 psi, tires should be at the maximum pressure listed for maximum load capacity.
Thanks!
Loving the videos. Much love
i dont understand why this was disliked 3 times🤔🤔🤔 its great helpful hands on information!
Cuz B-lat is just too handsone!
joshua lee I agree loll
For people that own boats with several years on the trailer make sure the rear seal on the axles has not failed...look at the back side of your rims to see if it has grease on it,,if it does the seal is bad and every time you launch your boat water is getting in your bearings and they have a very very short life left when this happens and could even end in loosing a wheel off you're trailer.
Your right , seen this happen. Also you will see a trailer along the highway on blocks. Thanks FLC
I wish we had a boat service place like that here in lakeland. they all suck here
How often do you hit those grease fittings?
How do you prevent accidentally shearing off your bottom end on a shallow gas pipe? Sorry. Had to! My 6yo loves your vids, especially catching those reds. Keep it up! Hope your boat is ok dude!
Good, what about the engine. Maybe oil checks ? Also the trolling motor should be checked for fishing line. Just thinking after watching your video, good ideas. FLC
How did you get your Z Man sponsorship? That’s my favorite brand
Nice video brother.. shout out falcon boats
What kind of top speed were you getting with that 250 Merc Pro XS 4 Stroke?
VH F 73 ish loaded
You look little next to that motor.lol
my boat doesnt break either but my line does xD......
Hey bro
When we going fishing together???
Need more actual fishing videos like watching you get them big bass just watching you fish we can take away from that to