Nike Logo Embroidery For Beginners - Ink/Stitch Tutorial 🪡🧶

Поділитися
Вставка
  • Опубліковано 30 січ 2025

КОМЕНТАРІ • 40

  • @bortodj
    @bortodj 4 місяці тому +1

    2:33 what version you have of ink stitch to get simulator and realistic preview? my version is v3.1.0

    • @mdesiigns
      @mdesiigns  4 місяці тому +1

      I was using the older version of ink stitch in this video. In my new video I show you where to find the realistic preview for v3.1.0 9:26 ua-cam.com/video/pdSBd21994Y/v-deo.htmlsi=zrCksW-Z7F7pKPYF

    • @bortodj
      @bortodj 3 місяці тому

      @@mdesiigns thanks so much, I'm embroidering a logo with my brother but it uses a lot of bobbin and it's not good, I tried to lighten it using the wheel on the sewing machine but it keeps using too much bobbin, there is a parameter on ink stitch to use less bobbin?

  • @aviii1670
    @aviii1670 11 місяців тому +1

    In which software we make designs?

    • @mdesiigns
      @mdesiigns  11 місяців тому +1

      I use adobe illustrator and procreate

  • @ShapedStudios
    @ShapedStudios Рік тому +1

    I have the latest InkScape I think but it feels like you have a neewer one. I can't find some of the things you have

  • @WrestlingPH
    @WrestlingPH Рік тому

    I need help. My default is all 0. I wanna know whats the best settings for the underlay. Thanks

  • @MarianneContreras-z8z
    @MarianneContreras-z8z Місяць тому +1

    Next Jordan logo sir

  • @sag_moon
    @sag_moon Рік тому +1

    Im getting a seem in the middle , its working in from both sides and meeting in the middle, how do i make it start at one end and finsh it the other seamlessly xxxx

    • @mdesiigns
      @mdesiigns  7 днів тому

      you can set your start and stop positions at different ends, double check your tension to avoid any gaps in your design

  • @chubsreyes2425
    @chubsreyes2425 Рік тому

    Question is this for one section or the whole design?

  • @linhthao1698
    @linhthao1698 Рік тому +1

    I use the same software, but my design came out with a couple of lines of stitches missing. I followed your step and everything. Would you know why?

    • @JesseFlannery
      @JesseFlannery Рік тому +1

      It’s probably a tension issue top or bottom. Could also be the backing stabilizer. Is there a lot of stitches. I use cutaway because it’s the most stabile, but honestly I’ve doubled stabilizer when I get into the high stitch counts because the needle can chop it up especially if it’s tear away.

  • @karatemund
    @karatemund 2 роки тому +2

    Hey! Incredible video!
    I’ve really been trying to get a clean design. I work on a Brother NV870 but i cant seem to get it clean the edges are janky and there is space between the stitches in some ereas?? I pay someone to do the digitization because i dont Got the software myself. Maybe you’ve Got an email where i could sent you some pictures so you could help me figure out this problem

    • @mdesiigns
      @mdesiigns  2 роки тому

      Hey feel free to send me a message on discord discord.gg/u43TrEU3

  • @seymanur5830
    @seymanur5830 2 місяці тому

    Merhaba. En sonda, realistic kısmını yapamadım. Muhtemelen sürümden dolayı farklılık var. 2024 sürümüde realistic butonunu nasıl bulabilirim?

    • @mdesiigns
      @mdesiigns  7 днів тому

      Hey you can check my latest video for the 2024 settings ua-cam.com/video/pdSBd21994Y/v-deo.htmlsi=Ddct0STSzLiQIJov&t=566

  • @AdamSmith-kl1rs
    @AdamSmith-kl1rs Рік тому +1

    What machine do you use? Mine has trouble with such dense designs.

    • @mdesiigns
      @mdesiigns  Рік тому

      I use the Brother PE535. Maybe it’s your tension settings. What machine do you have?

    • @AdamSmith-kl1rs
      @AdamSmith-kl1rs Рік тому +1

      @@mdesiigns I have a PE550d. I’ve played around with tension and stitch types and it seems to be a bit of trial and error.
      Depending on stitch type and material I’m using I have to use different tensions to make sure the bobbin doesn’t come through or have gaps in my designs.

    • @mdesiigns
      @mdesiigns  Рік тому +1

      @@AdamSmith-kl1rs oh okok. I have my tension set at 2, I never played around with other materials tho just cotton. I also use a thin tear away stabilizer..maybe that will help

    • @AdamSmith-kl1rs
      @AdamSmith-kl1rs Рік тому +1

      @@mdesiigns it’s funny, that’s exactly what I’ve found to work best so far! That does help thank you :)

    • @mdesiigns
      @mdesiigns  Рік тому

      @@AdamSmith-kl1rs ok good! No problem 😅

  • @shamsuddindost
    @shamsuddindost 2 місяці тому +1

    How can I get in contact with you?

    • @mdesiigns
      @mdesiigns  2 місяці тому

      themarshalldesigns@gmail.com

  • @katelynrios1289
    @katelynrios1289 Рік тому +1

    my params doesn't look the same and i can't get the stitch command to change. i have a huge line going through my design. 😅

    • @mdesiigns
      @mdesiigns  Рік тому

      What happens when you try to apply stitch commands?

  • @stephaniestuart8220
    @stephaniestuart8220 Рік тому +2

    sadly this is not working,i feel there is a step missing as im getting a error. so i am going back and doing things a longer way then coming back to this and see if this works after.

  • @aqibkhan7295
    @aqibkhan7295 Рік тому +1

    Machine price

  • @BrodyBingham
    @BrodyBingham Рік тому +1

    Please help, i click the fill stitch ending and fill stitch start and instead of 1 start and 1 stop there’s like 20

    • @mdesiigns
      @mdesiigns  Рік тому

      Check my other video..the more objects you have in the design the more start and stops you’ll have ua-cam.com/video/iggLW-RHlYc/v-deo.html

  • @aaronjones4636
    @aaronjones4636 11 місяців тому +2

    The music is more distracting than anything. Please just explain what your doing as you go through the process

    • @mdesiigns
      @mdesiigns  7 днів тому

      ill do voice overs in my next one