Indoor I would go G3flex, G3dome then G3micro, outdoor id go G4pro, G4bullet, G3bullet, G3flex, G3pro.. but id also preorder the G4dome for inside, I would bet it would be the indoor winner when it ships (i will review, i have one coming). The G4 sensors are worth the cost difference to me...
For the night vision shots, you should have considered turning off the infrared for all cameras except for the one being reviewed. The review conditions was basically the camera with a large bank of illuminators which can skew results.
I know, I realized that in post production :( But.. they all had the same unfair advantage so still a decent comparison. I didn't realize what an undertaking it was to mount and film them, ideally i would have left the rig up longer, but it took almost two weeks with the fogging issue and holiday so.. Next time :)
Thank you for this review! Please keep producing content like this as Ubiquiti updates their camera lines - it’s very helpful for a consumer trying to assess what product to purchase. Thanks again!
Thank you for this wonderful break down. I'm happy to see you ranked them exactly how I was hoping you would. I'm in process of deploying six exterior cameras at my house (some covered) and this video helped me figure out an approach.
Great review, thanks 👍 Made me aware of a couple of good pointers before buying for my property 😃 Especially your No. 1 caught my eye plus the G4 without a doubt my go to for exterior after seeing its night performance 🌃
I agree putting the g3 flex under something like a porch is preferable, but I will say that I have had two g3 flexes on a telephone pole for 1.5 years. They have withstood direct rain and central California heat no problem. They have had no issues at all and I am beyond impressed for the price. I will note that since I had them so high up the IR was very poor (expected). I added some external IR illuminators and the night vision actually surpassed all my cameras except my g4 pro. Also it stopped bugs/webs/rain from ruining the image from the camera IR. They just don't really show up anymore since the IR is external from the camera. HUGE plus out in the country with so many bugs! Great review. Thanks.
Awesome feedback man! Nothing beats practical experience. I am about to do some IR illuminator test in advance of Ubiqitis new POE IR module.. this is some good info to add to the test. Thanks again!
Excellent review, thanks very much for this. I didn't even see the dome before, but that looks like a very good choice to put for a home usage on a patio or something like that.
Thanks for your review, you are a really nice speaker. I bought one new Wi-Fi G3 instant Camera and now I’m going to buy 2 G4-bullet to replace my nest cameras. I’m really impressed with the new G3 instant camera.
Good to see smaller consumer cams getting pretty good results these days. Probably getting to the level of 'prosumer' stuff from 5-8 years ago which is actually a compliment.
Super helpful review of each of these. We just purchased a new house and I recently made the switch to Ubiquiti network gear in my homelab. I am looking to deploy these cameras around the property in spring. I especially liked the review of the G3 Flex. I may pick up a few of these for inside of the house to test out this winter.
@@DPCTechnology I have ordered a G4 Bullet from Ubiquiti Europe to play with. I already run a couple of UniFi Access Points off an little Ubiquiti PoE switch with a UniFi Controller sat on an HP Microserver (Windows) with plenty of storage. I don't really want to buy more hardware, so it will be interesting to see if I can install the end of life UniFi Video software on the Microserver too, and get the G4 bullet to work. I wonder if I'll end up buying a CK+ or Protect UNVR! Thanks again
Thanks for the great review! It has really made me re-think the camera choices for the Unifi Protect home surveillance system I am building. I'm now leaning toward using the G3 FLEX, exterior mounted under my roof eaves through the soffit, using UVC-G3-F-C. (Also, I was surprised to see in Ubiquiti's quick start guide for the G3 Dome that it _can_ be used outdoors if in a protected location ... but after watching your review, the G3 FLEX will be the workhorse of my system instead, perhaps with one G4Bullet or G4Pro thrown in.)
Man this was GREAT and just what I was looking for! I hope you guys are making all the UA-cam money!!! I was really going back and forth on that G3 Flex but hope they come out with a G4 version. That said, I've got to go check out your review on the G4 dome...I'm curious on the angel view for a residential application. If I use the Zoom feature, I can see what my neighbor is having for dinner... among other things... and I just don't need that. Did the sound quality factor into any of this? It seemed like it was just a video, which is OK by me. I would assume most audio is standard.
Well done, I have needed this video, and this was fantastic! Thank you so much!!! Subscribed, this is great quality for someone with so few subscribers. Hoping to see more Ubiquiti videos!
I have a quick question, please. Can you just use NVR and PoE switch to set up a security camera system? Also, how do you view the cameras on a big screen - TV or monitor (I don't see any "HDMI out" at the back of the Unifi NVR). Again, thank you for the great video, you save me some research time.
@@tdakov Yes u can, I use the Unifi ViewPort to display on TV www.bhphotovideo.com/c/product/1560696-REG/ubiquiti_networks_ufp_viewport_unifi_protect_viewport_poe.html?ap=y&smp=y
Thanks for the video, I have all of the info I need to design my perfect security system. The only missing puzzle piece finding a place that actually sells them...
Thanks for the review, you recommend the G3 Flex from a front door outside but on a porch so issue with weather other than cold, being installed in Canada
Great review of the product line. There's not many reviews of some of the products out there (g4 line especially). I went for 2 g4 bullets as I just cannot justify the g4 pro price tag, it's just so expensive.
@@DPCTechnology They had some G4 Domes in stock today. I decided to purchase two with a UDM Pro. Mid price but has the G4 hardware. We'll see how they are.
I have the G3 Pro on my driveway. It's mounted to a small radio tower directly exposed to the elements, 2 years and still going strong. Yeah the sensor quality isn't that great, but I like to use the optical zoom every now and then to catch a car coming up the street, plus the build quality is really great. I am looking to upgrade the G3 Pro to the G4 Pro though. But the number 1 camera for me right now is the Ubiquiti G3 Instant camera, only at 29$, WiFi only camera. I bet the G3 Micro will be discontinued in favor for that one. When you really need to add a lot of angles inside, look no further than the G3 Instant.
I don't know why, but I think I'm going to get a G4 Pro for my residential...and it's not even like I like in a bad neighborhood I just love that quality lol, the G4 Bullet is so close though.
I just got a micro, and put it to shoot all the way down a hallway, and it was the totally wrong use for it, but after realizing how wide the lens was, I am now going to find a better use for it, as it is very well suited for overviews of huge areas
My biggest concern was the MIC... looking at the chapters I didn't see any talk about Audio...I am probably passing over the INstant 4 because I heard the mic was horrible.
Yeah, it'll be interesting to see what the fives look like.. they are an early access.. to be completely fair, I turn off the mics at most of my installs, so I'm not the best person in the world to give you a critique...
I feel like the G3 Micro would be a camera I would use in smaller spaces like closets that contain inventory in my office and be able to keep a smaller profile while maintaining surveillance on a very expensive inventory.
Nice stuff & great review! Would like to buy a few of these for around the outside of my house, but I really don't like the white color. I can mount them perfectly protected from the weather under my roof overhang, but I dread the look of those big white "snowballs" hanging there. I know, some would argue that all adds to the protection level, you know when people with malicious intent can notice the camera's from a mile away, but I much more favor the stealth approach. So does the wife, and we all know how important the WAF factor is. Ubiquiti really needs to release these things in black. Like really really. To be honest, I'm kind of surprised they haven't already.
@@DPCTechnology Thanks for the swift response. I've read that argument before: that the camera's put out so much heat, making them black would only make it harder for them to dissipate it. In my case that would not be a problem because I could hang them under my roof overhang, where they would never hang in direct sunlight, but yeah, if this is a problem, Ubiquiti should address this for sure.
I think it’s important to add that if any of the cameras or ubiquiti devices is faulty, going through the RMA process is quite painful compared to customer support offered by competitors. You may argue that Ubiquiti is positioning their products towards companies, but still someone who is installing their products has to go through RMA process. First you have to pay for the return label, and make sure that you have purchased from authorized dealer and have receipt/invoice. Also turnaround waiting time is about 3-4 weeks. I did RMA on 3 items (G3, POE switch, CloudKey plus) so far and it’s disappointing.
I’m looking at adding these to my UniFi Network. From this video it seems use the Bullet/Pro cameras outside and then get the G3 Flex to go inside where needed? Might even hold off on the inside cameras for any possible G4 Flex.
The G4 Pro and similarly G4 Doorbell issues (randomly failing after a year or two) are both quite concerning - Ubiquiti don't seem to be handling either situation well. The G3 Micro would be great if it could be fit outside, though - that wide angle is great
Better talk about longevity, especially recommending for yourself the most expensive one. I have not seen any outdoor camera for myself last more than two years in Texas before it quits internally. On my third one (not ubiquiti but other well known brands). Installed a sunshade over it, see what happens. I think durability needs to be a larger concern with something like this that is rated outdoors, alot of them use the same parts more than one would think.
That's a really good point. I'll make sure I talk a little bit more about build quality and do some long-term tests. Another point is that ubiquiti often orphans older cameras and doesn't provide updates. Thanks for the feedback!
Great review! How does the G4 Dome compare to the G3 Dome and where does it fall in the list of the current cameras? Do you think the G4 Dome might land ahead of the G4 Bullet?
It's pretty good. I will probably put more G4 Domes in. I'm still dealing with some IR reflection issues so I'd give the slight edge to the bullet. The smart detections are a game changer for me.
Great comparison! With the night time tests all the cameras in the array had their infrared lights on at the same time and pointing/illuminating the same area, do you think using a single camera would have had a lower quality?
great vid. Would you not have the lab setup running for 72h before you take it to site? Then you can RMA items before the embarrassment of the fogging becomes an issue at the site.
I'm curious how the new G3 Instant Camera will perform, especially compared to the G3 Flex. At it's price point and easy installation I can see it being a solid option for some indoor residential. Once available I'd like to use these to replace some Wyze cams I've got around the house. Perfect review btw, probably the best I've seen on the Protect Cameras.
I've had a G3 Instant for a few weeks, and it seems to be on par with the Flex in image quality and IR. I have a few dead spots at clients where these would make sense.
Video coming out today/early am.. It's awesome! It definitely makes the Micro obsolete, mounting options are better on the G3 Flex.. full opinion coming out very, very soon!
you should address that Ubiquiti like to "phase out" older gen models. After so long certain models are "no longer supported" - specifically their APs. I wonder if this is the same (or is going to be the same) for their Unifi Protect line of cameras. I would have ordered G3 cameras because I'm only needed 1080p. BUT with my experience with the APs, I thought it was best to just get the G4 bullet cameras because they are the "newest" gen models...
Looking the camera review, if you had turned on HDR on the G4 bullet and G4 Pro, the indoor office would have been a lot more natural looking and brighter. Right now they look a bit too dark but perhaps you have that dark office? I dont know. As for the G4 pro fogging issue, i have a model 1,5 months old and it didnt have the fog issue. Its been outside at that time, from +13Celcius down to -8Celsius so far. Works really well but it does cost a lot and G4 bullet is out of stock atleast here in EU ubi store so out of luck there. I also have couple of G3 pro's and i kind of agree with you there. The colors of red and black for example, are a lot different with G3 pro vs G4 pro where G4 shows them naturally, the other too bland.
I agree, I adjust my image quite a bit but I wanted to give an "out of the box" comparison. Everyone has a different idea of what they want when it comes to brightness, contrast, saturation, sharpness, etc. so instead of going down that path I reset them all to factory.
The trouble with this video is that there were already new cameras announced and at least in early access. Im pretty sure the G4 Bullet was already available
@@DPCTechnology I would especially be interested in seeing that review. In a residential setting I don't know how much of a use case I have for a dome camera on my property - maybe on the one corner of the garage, but I did like the wide view of the G3Dome.
@@DPCTechnology I really enjoyed this video, and I am looking forward to a G4 Dome comparison too (side by side with the G3 Dome and the G3 Flex ... since the Flex "won" in this video). I'm gathering information for our small church on which cameras to use for both inside and out. I think we are planning to go with G4 bullets outside at all entrances. I had intended to order G4 domes for inside, but after seeing the performance of the G3 Flex, I may rethink that. If the G4 Dome is so much better than the Flex that it warrants the extra money, we'll stick with it, but maybe the Flex will serve us well. Being a small church, the cost will be a really big factor, but quality of video matters too.
When you were testing outside during the day, approximately how many feet between the camera and the license plate you read with the zoom on the G4Pro? Great video!
On my G4 Doorbell I keep getting the "Doorbell camera is offline. No power or disconnected". Already have the proper transformer installed and am at 90% wireless connection. Anyone else seen or experiencing this ? Any suggestions to fix ?
Question: how is the zoom and the quality of recordings on this camera? Not the live views. But the actual recored footage. From what I see you are doing everything live. But does it zoom in the same on recorded footage? This is the only question that is keeping me from purchasing this camera right now.
Great video and comparison. Been looking for a comparison video for a while. How low do you need to put the g3 flex and dome in order to capture faces as most cameras catch only top of heads...?
At my desk I use an A73 with a 24 1.4 GM. At the studio stand up desk I use an A7s3 with Tamron 28-75 2.8. My desk setup is my daily webcam. It’s set up like @calebpike (dslr video shooter) did in his all in one desk setup. I use a rode ntg shotgun into a mix pre 3 for audio.
@@DPCTechnology .. One more question, if I purchase everything from you and install myself. Are you able to remotely configure? While I have a basic understanding, you obviously could do it in a fraction of the time. My system is small and for home use, I'm more concerned about my granddaughter getting around the pool in case somebody leaves the door open effectively defeating the alarm. I'm looking at 8 x G4 Bullets, UniFi Pro UDM-PRO, UniFi Switch PRO 24 PoE (for Wi-Fi 6 APs, etc), UniFi Switch PRO 12 PoE (for the actual 8 x cameras separate location), 4 x UniFi Switch 8 60W (basically for TVs and streaming/gaming; PoE just in case; I'll probably need more...), 4 x whatever the new Wi-Fi 6 version of "UniFi Access Point AC Pro" is called (one of them is dedicated to the garage and a few IoT devices e.g. Rachio, opener so something more basic I'm certain will be fine in 1 x place), and I'm thinking about the UniFi Protect Network Video Recorder (I'm aware the UDM Pro can do it, but one of the setup things is I don't want all that streaming data going back and forth unnecessarily). Lastly, I'd like the cheapest solution for 3-4 x 10 Gbps links to 2-3 PCs and a NAS. Basically the way I have the network setup is in my office are all the runs to the main switch and then underneath our family room TV I have all the runs for the eight cameras plus two separate runs to the office; just in case I wanted to keep everything air gapped and separate. Thanks. This probably would be easier to email. So if you have an email post it and then you can delete the email address or point me and the right direction.
@@DJaquithFL Sorry but we only do them for our clients in Florida/Georgia. You might want to look on the Ubiquiti channels on Facebook and Reddit for a local installer that can help you out.
Man, we just took down all our cameras for an office renovation. I will make sure to get that angle in our next video when we put the new system up. The renovation is going to take a couple of months.
Have you had any issues with the G4 bullet and the image quality? I saw on both Reddit and Unifi topics that some people complain about the quality of the image. I’m about to buy either a flex or a g4b for our outside covered porch and can’t decide.
I love my G4 Bullet, the smart detections make it a no brainer. If u don't need them and the mounting area has some cover (not direct weather) then the flex is great!
@@DPCTechnology thanks for the info. Yeah the porch it would be on is covered and it be far enough back to stay protected. It currently has a nest cam which apparently has a better sensor than the flex. Which makes me nervous as I don’t want to really downgrade the picture.
Everything in my home is unifi udm pro 24 port pro switch 2 wifi6 ap pros. My only issue with cameras is you can get same or better quality for much cheaper. And I hate it
There are pros and cons. I think the ubiquiti value is fair. It's not the most expensive and not the least. The UDM brings nice central management of a lot of things...
The only thing I would say is with all of those camera's on at the same time at night. It is a slightly mislead video. Because there is an awful lot of ir being sh from all of the camera's at the same time. Not saying this is bad because it was a great comparison between the cams.. thank you.
The good news is it resolves itself pretty quickly and it's a really nice camera long-term. But yes, it's silly that such an expensive camera would have an issue at all
The company stock is at $300 per share and they have nothing to sell. Everything is sold out unless you want to pay scalpers prices for the cameras on Amazon.
If you install these for clients, and want them to work "right away", you might want to try running all the cameras for 72hrs first on your own site to get rid of any condensation, then repack them, then redeploy them.
Great review and comparison! As a home owner I would be curious to hear your ranking for indor and then a ranking for outdoor use.
Indoor I would go G3flex, G3dome then G3micro, outdoor id go G4pro, G4bullet, G3bullet, G3flex, G3pro.. but id also preorder the G4dome for inside, I would bet it would be the indoor winner when it ships (i will review, i have one coming). The G4 sensors are worth the cost difference to me...
@@DPCTechnology I dont see a G4 Dome on their website... Any specs or release info you can share?
@@reissallan should be there now
@@DPCTechnology 7th z 3
@@DPCTechnology bbbbbiii hiin
For the night vision shots, you should have considered turning off the infrared for all cameras except for the one being reviewed. The review conditions was basically the camera with a large bank of illuminators which can skew results.
I know, I realized that in post production :( But.. they all had the same unfair advantage so still a decent comparison. I didn't realize what an undertaking it was to mount and film them, ideally i would have left the rig up longer, but it took almost two weeks with the fogging issue and holiday so.. Next time :)
It's time for an update to this video. Would love to get your thoughts on new camera installs for a homeowner.
It's in the pipeline.. will be out soon :)
Since I'm migrating our locations into Unifi equipment, this video is extremely helpful and appreciated! Thanks very much.
Thanks for the feedback!
Thank you for this review! Please keep producing content like this as Ubiquiti updates their camera lines - it’s very helpful for a consumer trying to assess what product to purchase. Thanks again!
Thanks man! G4 Dome vs G3 Dome vs G3 flex should be out this week 😀
@@DPCTechnology subscribed and looking forward to it!
I for one would use the Unifi G4 bullets outdoors. However, I could not go too wrong with the Unifi G3 Flex if I want to watch my budget.
Really enjoyed your review and comments. Well done. Came across as a very genuine review.
Thanks for the feedback!
Thanks for addressing the condensation issue on the G4 Pro. Helped me make a informed decision.
You're welcome! Thanks for the feedback!
Thank you for this wonderful break down. I'm happy to see you ranked them exactly how I was hoping you would. I'm in process of deploying six exterior cameras at my house (some covered) and this video helped me figure out an approach.
Awesome! Thanks for the feedback.
Great review, thanks 👍
Made me aware of a couple of good pointers before buying for my property 😃 Especially your No. 1 caught my eye plus the G4 without a doubt my go to for exterior after seeing its night performance 🌃
Thanks for the feedback!!
I agree putting the g3 flex under something like a porch is preferable, but I will say that I have had two g3 flexes on a telephone pole for 1.5 years. They have withstood direct rain and central California heat no problem. They have had no issues at all and I am beyond impressed for the price.
I will note that since I had them so high up the IR was very poor (expected). I added some external IR illuminators and the night vision actually surpassed all my cameras except my g4 pro. Also it stopped bugs/webs/rain from ruining the image from the camera IR. They just don't really show up anymore since the IR is external from the camera. HUGE plus out in the country with so many bugs!
Great review. Thanks.
Awesome feedback man! Nothing beats practical experience. I am about to do some IR illuminator test in advance of Ubiqitis new POE IR module.. this is some good info to add to the test. Thanks again!
Very bright for the area being used
Nice work Clay. This really helped me nail down what I was going to use for my office. I really appreciate the info and the effort.
Thanks for the kind feedback!
Excellent review, thanks very much for this. I didn't even see the dome before, but that looks like a very good choice to put for a home usage on a patio or something like that.
Thanks for the kind feedback!
Thanks for your review, you are a really nice speaker. I bought one new Wi-Fi G3 instant Camera and now I’m going to buy 2 G4-bullet to replace my nest cameras. I’m really impressed with the new G3 instant camera.
It's a great value, hard to go wrong!
Great job! super helpful. Thank you
Thanks for the feedback!
Can you do please condensation issue test and compare it ? Your review for this case can be excellent and very helpful too.. Thank you so much..
I have had the condensation issue several more times. It goes away within 2-3 days. It happened to me just 2 weeks ago so it is still an issue.
Good to see smaller consumer cams getting pretty good results these days. Probably getting to the level of 'prosumer' stuff from 5-8 years ago which is actually a compliment.
Exactly
Great comprehensive video! This made me subscribe. Thx.
Thanks for the kind words!
Super helpful review of each of these. We just purchased a new house and I recently made the switch to Ubiquiti network gear in my homelab. I am looking to deploy these cameras around the property in spring. I especially liked the review of the G3 Flex. I may pick up a few of these for inside of the house to test out this winter.
Yeah, at the price they r hard to beat. Pick one up and test, you wont be disappointed. Thanks for the feedback!
Really useful comparison. Thank you - the hard work is appreciated
Thanks, I really appreciate the feedback!
@@DPCTechnology I have ordered a G4 Bullet from Ubiquiti Europe to play with. I already run a couple of UniFi Access Points off an little Ubiquiti PoE switch with a UniFi Controller sat on an HP Microserver (Windows) with plenty of storage. I don't really want to buy more hardware, so it will be interesting to see if I can install the end of life UniFi Video software on the Microserver too, and get the G4 bullet to work. I wonder if I'll end up buying a CK+ or Protect UNVR!
Thanks again
Great video. This has definitely helped me with my decision of which cameras to get for my home seeing that I am upgrading my equipment to Ubiquiti.
Thanks for the feedback man!
Awesome content! So helpful! Thanks for your effort, clarity, presentation!
Thanks for the kind feedback
Best comparison on UA-cam. Great work 👍. G4 pro just doesn’t make any sense with price and quality.
Thanks for the feedback!
Thank you for at great review of the whole lineup. Great work! Really helpful 👍🏼
Thanks for the kind words!
Thanks for the great review! It has really made me re-think the camera choices for the Unifi Protect home surveillance system I am building. I'm now leaning toward using the G3 FLEX, exterior mounted under my roof eaves through the soffit, using UVC-G3-F-C. (Also, I was surprised to see in Ubiquiti's quick start guide for the G3 Dome that it _can_ be used outdoors if in a protected location ... but after watching your review, the G3 FLEX will be the workhorse of my system instead, perhaps with one G4Bullet or G4Pro thrown in.)
Awesome, it really is a good value. Have fun with ur project!
Good breakdown on all the cameras and nice to see your experience and opinions from real world deployment
Thanks Jim, we appreciate the feedback!
Man this was GREAT and just what I was looking for! I hope you guys are making all the UA-cam money!!!
I was really going back and forth on that G3 Flex but hope they come out with a G4 version. That said, I've got to go check out your review on the G4 dome...I'm curious on the angel view for a residential application. If I use the Zoom feature, I can see what my neighbor is having for dinner... among other things... and I just don't need that.
Did the sound quality factor into any of this? It seemed like it was just a video, which is OK by me. I would assume most audio is standard.
Yeah the audio is decent on all of them. Thanks for the kind feedback.
Absolutely amazing video, thanks for the effort doing this!
Thanks for the kind words
Cool. i'll have to link to this video on my channel!
Thanks!
Thanks for the info.
Well done, I have needed this video, and this was fantastic! Thank you so much!!! Subscribed, this is great quality for someone with so few subscribers. Hoping to see more Ubiquiti videos!
Thanks for the feedback!
Great video. Thank you.
Thanks for the feedback!
I have a quick question, please.
Can you just use NVR and PoE switch to set up a security camera system?
Also, how do you view the cameras on a big screen - TV or monitor (I don't see any "HDMI out" at the back of the Unifi NVR).
Again, thank you for the great video, you save me some research time.
@@tdakov Yes u can, I use the Unifi ViewPort to display on TV www.bhphotovideo.com/c/product/1560696-REG/ubiquiti_networks_ufp_viewport_unifi_protect_viewport_poe.html?ap=y&smp=y
Thank you so much, this was very helpful g4 bullet it is
Thanks for the feedback!
Thanks for the video, I have all of the info I need to design my perfect security system.
The only missing puzzle piece finding a place that actually sells them...
Exactly!
Thanks for the review, you recommend the G3 Flex from a front door outside but on a porch so issue with weather other than cold, being installed in Canada
I would ask in the ubiquiti reddit group. I would think I'd be fine but I live in Florida 😂
Wish you can do a split screen image and compare it that way
Great idea! I will in the future. thanks for the feedbacl
I enjoyed this video, as also recommend and install Ubiquiti products. A very honest evaluation as well.
Thanks for the feedback!
Great review of the product line. There's not many reviews of some of the products out there (g4 line especially). I went for 2 g4 bullets as I just cannot justify the g4 pro price tag, it's just so expensive.
You will be happy with them! As long as you dont need a super-wide angle. I think they are the sweet spot for outdoors in the protect system!
@@DPCTechnology time will tell regarding the field of view. It's for my driveway so should do the job 🤞
@@ItzD3fW1sH It should. it's fine, it's just the pro is soooo wide!
excellent comparison!
Thanks for the feedback!
Excellent review, thank you.
Thanks for the feedback!
@@DPCTechnology I was thinking 3x G4 Pro site unseen, but now likely to go with 3x G3 Flex. If only I could find them in stock somewhere.
@@ccvideotech Stock is very hard to find across the board..
@@DPCTechnology They had some G4 Domes in stock today. I decided to purchase two with a UDM Pro. Mid price but has the G4 hardware. We'll see how they are.
@@ccvideotech they r nice.. You will like
I have the G3 Pro on my driveway. It's mounted to a small radio tower directly exposed to the elements, 2 years and still going strong. Yeah the sensor quality isn't that great, but I like to use the optical zoom every now and then to catch a car coming up the street, plus the build quality is really great. I am looking to upgrade the G3 Pro to the G4 Pro though. But the number 1 camera for me right now is the Ubiquiti G3 Instant camera, only at 29$, WiFi only camera. I bet the G3 Micro will be discontinued in favor for that one. When you really need to add a lot of angles inside, look no further than the G3 Instant.
Agree 100%! Thanks for the feedback!
@@DPCTechnology
I’m so sorry
I don't know why, but I think I'm going to get a G4 Pro for my residential...and it's not even like I like in a bad neighborhood I just love that quality lol, the G4 Bullet is so close though.
It's really amazing!
I just got a micro, and put it to shoot all the way down a hallway, and it was the totally wrong use for it, but after realizing how wide the lens was, I am now going to find a better use for it, as it is very well suited for overviews of huge areas
Yeah, totally makes sense.
My biggest concern was the MIC... looking at the chapters I didn't see any talk about Audio...I am probably passing over the INstant 4 because I heard the mic was horrible.
Yeah, it'll be interesting to see what the fives look like.. they are an early access.. to be completely fair, I turn off the mics at most of my installs, so I'm not the best person in the world to give you a critique...
I feel like the G3 Micro would be a camera I would use in smaller spaces like closets that contain inventory in my office and be able to keep a smaller profile while maintaining surveillance on a very expensive inventory.
Yeah, i would look at the g4 instant
Indeed, have you reviewed the Ubiquiti PTZ yet?
@@johnathanruiz-pineda9610 I have.. I'm about to do my 18 month update on it.
Ubiquiti's APs are affordable, but their cameras with modern hardware are obscenely expensive.
They are not inexpensive for sure!
Nice stuff & great review! Would like to buy a few of these for around the outside of my house, but I really don't like the white color. I can mount them perfectly protected from the weather under my roof overhang, but I dread the look of those big white "snowballs" hanging there. I know, some would argue that all adds to the protection level, you know when people with malicious intent can notice the camera's from a mile away, but I much more favor the stealth approach. So does the wife, and we all know how important the WAF factor is. Ubiquiti really needs to release these things in black. Like really really. To be honest, I'm kind of surprised they haven't already.
Yeah, I think a 3rd party should make a skin (or skins) .. Not sure about heat, the G4 Pro puts out some heat for sure..
@@DPCTechnology Thanks for the swift response. I've read that argument before: that the camera's put out so much heat, making them black would only make it harder for them to dissipate it. In my case that would not be a problem because I could hang them under my roof overhang, where they would never hang in direct sunlight, but yeah, if this is a problem, Ubiquiti should address this for sure.
@@bartdg282 Agreed.. Offer a $15 skin for that application and id think u'd sell like crazy. Or better yet offer everything in black or white!
I think it’s important to add that if any of the cameras or ubiquiti devices is faulty, going through the RMA process is quite painful compared to customer support offered by competitors.
You may argue that Ubiquiti is positioning their products towards companies, but still someone who is installing their products has to go through RMA process.
First you have to pay for the return label, and make sure that you have purchased from authorized dealer and have receipt/invoice. Also turnaround waiting time is about 3-4 weeks.
I did RMA on 3 items (G3, POE switch, CloudKey plus) so far and it’s disappointing.
Agreed! Been there, done that!
Presumably these night time images are not actually representative, since all cameras have IR LEDs that illuminate the area?
Yeah I later videos I fixed that problem but yes there is IR cast from everything
This is a great video comparison - is there an update for 2021/2022?
I got it on the schedule. It's just hard to get all of the latest ones and some of them are in early access.. but I will do it soon
@@DPCTechnology awesome and thank you so much for the effort you put into the videos - if you were local I'd hire you based on the videos alone. :)
@@thejmac69 thanks for the kind feedback!
This video made me subscribe, thank you for doing this.
Thanks for the kind feedback!
I’m looking at adding these to my UniFi Network. From this video it seems use the Bullet/Pro cameras outside and then get the G3 Flex to go inside where needed? Might even hold off on the inside cameras for any possible G4 Flex.
The G4 flex would be amazing depending on price..
The G4 Pro and similarly G4 Doorbell issues (randomly failing after a year or two) are both quite concerning - Ubiquiti don't seem to be handling either situation well. The G3 Micro would be great if it could be fit outside, though - that wide angle is great
Ubiquity has been hit or miss on support..
Better talk about longevity, especially recommending for yourself the most expensive one. I have not seen any outdoor camera for myself last more than two years in Texas before it quits internally. On my third one (not ubiquiti but other well known brands). Installed a sunshade over it, see what happens. I think durability needs to be a larger concern with something like this that is rated outdoors, alot of them use the same parts more than one would think.
That's a really good point. I'll make sure I talk a little bit more about build quality and do some long-term tests. Another point is that ubiquiti often orphans older cameras and doesn't provide updates. Thanks for the feedback!
Great review! How does the G4 Dome compare to the G3 Dome and where does it fall in the list of the current cameras? Do you think the G4 Dome might land ahead of the G4 Bullet?
It's pretty good. I will probably put more G4 Domes in. I'm still dealing with some IR reflection issues so I'd give the slight edge to the bullet. The smart detections are a game changer for me.
Great comparison!
With the night time tests all the cameras in the array had their infrared lights on at the same time and pointing/illuminating the same area, do you think using a single camera would have had a lower quality?
yes, that was my mistake, in all my other videos since this one I turn them all off. :(
great vid. Would you not have the lab setup running for 72h before you take it to site? Then you can RMA items before the embarrassment of the fogging becomes an issue at the site.
Good point, but it isn't ideal on a $450 bullet camera.
Good video. Thanks !!!
Thanks for the feedback
I'm curious how the new G3 Instant Camera
will perform, especially compared to the G3 Flex. At it's price point and easy installation I can see it being a solid option for some indoor residential. Once available I'd like to use these to replace some Wyze cams I've got around the house.
Perfect review btw, probably the best I've seen on the Protect Cameras.
I have one on order, will be next video after G4 Dome this week.. :)
I've had a G3 Instant for a few weeks, and it seems to be on par with the Flex in image quality and IR. I have a few dead spots at clients where these would make sense.
excellent video. have you had a chance to test the G3 Instant? i wonder how price/performance compares to the G3 Flex.
Video coming out today/early am.. It's awesome! It definitely makes the Micro obsolete, mounting options are better on the G3 Flex.. full opinion coming out very, very soon!
Nice breakdown DPC!
Thanks guys!
you should address that Ubiquiti like to "phase out" older gen models. After so long certain models are "no longer supported" - specifically their APs. I wonder if this is the same (or is going to be the same) for their Unifi Protect line of cameras. I would have ordered G3 cameras because I'm only needed 1080p. BUT with my experience with the APs, I thought it was best to just get the G4 bullet cameras because they are the "newest" gen models...
They are notorious for doing the same with their cameras.. U r correct that buying the newer ones will protect you from this practice a little...
Look really nice cameras but looking online for some cheap ones and looking at the Ubiquiti airCam
I dont think they are supported in Protect
@@DPCTechnology yah I was thinking that but then also thinking I could use there own airVision
Wish they had pan and tilt
They do, check out my other videos. But it's expensive and not a ton of software features..
Looking the camera review, if you had turned on HDR on the G4 bullet and G4 Pro, the indoor office would have been a lot more natural looking and brighter. Right now they look a bit too dark but perhaps you have that dark office? I dont know. As for the G4 pro fogging issue, i have a model 1,5 months old and it didnt have the fog issue. Its been outside at that time, from +13Celcius down to -8Celsius so far. Works really well but it does cost a lot and G4 bullet is out of stock atleast here in EU ubi store so out of luck there. I also have couple of G3 pro's and i kind of agree with you there. The colors of red and black for example, are a lot different with G3 pro vs G4 pro where G4 shows them naturally, the other too bland.
I agree, I adjust my image quite a bit but I wanted to give an "out of the box" comparison. Everyone has a different idea of what they want when it comes to brightness, contrast, saturation, sharpness, etc. so instead of going down that path I reset them all to factory.
@@DPCTechnology Understandable! Thanks for the review.
The trouble with this video is that there were already new cameras announced and at least in early access. Im pretty sure the G4 Bullet was already available
These were all that were out of embargo at that point. The G4 Bullet is in review. I have reviewed the G4 Dome and G3 Instant in subsequent reviews.
Great Review. I wish the G4 Dome would come out already.
Agreed, that would be great addition!
It is now showing up on the UI store for pre order, would be interested to see how this performs.
@@robwideman2534 I ordered one last week, will do a side by side comparison with the G3Dome
@@DPCTechnology I would especially be interested in seeing that review. In a residential setting I don't know how much of a use case I have for a dome camera on my property - maybe on the one corner of the garage, but I did like the wide view of the G3Dome.
@@DPCTechnology I really enjoyed this video, and I am looking forward to a G4 Dome comparison too (side by side with the G3 Dome and the G3 Flex ... since the Flex "won" in this video). I'm gathering information for our small church on which cameras to use for both inside and out. I think we are planning to go with G4 bullets outside at all entrances. I had intended to order G4 domes for inside, but after seeing the performance of the G3 Flex, I may rethink that. If the G4 Dome is so much better than the Flex that it warrants the extra money, we'll stick with it, but maybe the Flex will serve us well. Being a small church, the cost will be a really big factor, but quality of video matters too.
Thanks for pointing out the fogging issue. I , for one do not like Ubiquitis rma process. #PITA
Yeah, it's not the easiest! Thanks for the feedback!
Usefull review, were all the cameras running at the same time? if so there must be more ir lighting than in a real world situation
They were. It was my mistake. In all the later reviews I turn them all of and review each individually.
@@DPCTechnology thanks for clarifying
Is the micro discontinued?
I think so, it didn't makes sense with the instant in the lineup at 80% less cost.
When you were testing outside during the day, approximately how many feet between the camera and the license plate you read with the zoom on the G4Pro?
Great video!
That was 40 to 50 feet away.
Dang! Point that camera down to keep the horizon out of the view so it doesn't get blasted by the sun.
Yeah I was making it as hard for the camera as possible.
On my G4 Doorbell I keep getting the "Doorbell camera is offline. No power or disconnected". Already have the proper transformer installed and am at 90% wireless connection. Anyone else seen or experiencing this ? Any suggestions to fix ?
Question: how is the zoom and the quality of recordings on this camera? Not the live views. But the actual recored footage. From what I see you are doing everything live. But does it zoom in the same on recorded footage? This is the only question that is keeping me from purchasing this camera right now.
Which camera are you looking at?
Love it Great video thanks
Thanks for the feedback!
I wish the cameras had time stamps in the video feed...
Sorry, my mistake, I added them in later videos.
@@DPCTechnology thanks. That is a game changer
If only g3 flex and g3 instant was in stock
I know man...
Nice video!
Thanks for the feedback!
what is the largest camera deployment or site you had done with ubiquiti?
25 cameras. I typically use protect for systems with 16 or less cameras. And I would say the average size is 6-10.
Great video and comparison. Been looking for a comparison video for a while. How low do you need to put the g3 flex and dome in order to capture faces as most cameras catch only top of heads...?
will do
@@DPCTechnology sorry I don't understand the reply...
@@justintemp ill test in an upcoming video :)
@@DPCTechnology thanks, 👍
Hard to beat a g3 flex
Great camera at the price!
What camera do you use for filming at your desk? Excellent bokeh.
At my desk I use an A73 with a 24 1.4 GM. At the studio stand up desk I use an A7s3 with Tamron 28-75 2.8. My desk setup is my daily webcam. It’s set up like @calebpike (dslr video shooter) did in his all in one desk setup. I use a rode ntg shotgun into a mix pre 3 for audio.
Excellent comparison information! Question .. UniFi's G4 line will the AI "Person Detection" work in an air-gap installation?
I don't see why it wouldn't.. It will..
@@DPCTechnology .. One more question, if I purchase everything from you and install myself. Are you able to remotely configure? While I have a basic understanding, you obviously could do it in a fraction of the time.
My system is small and for home use, I'm more concerned about my granddaughter getting around the pool in case somebody leaves the door open effectively defeating the alarm. I'm looking at 8 x G4 Bullets, UniFi Pro UDM-PRO, UniFi Switch PRO 24 PoE (for Wi-Fi 6 APs, etc),
UniFi Switch PRO 12 PoE (for the actual 8 x cameras separate location), 4 x UniFi Switch 8 60W (basically for TVs and streaming/gaming; PoE just in case; I'll probably need more...), 4 x whatever the new Wi-Fi 6 version of "UniFi Access Point AC Pro" is called (one of them is dedicated to the garage and a few IoT devices e.g. Rachio, opener so something more basic I'm certain will be fine in 1 x place), and I'm thinking about the UniFi Protect Network Video Recorder (I'm aware the UDM Pro can do it, but one of the setup things is I don't want all that streaming data going back and forth unnecessarily). Lastly, I'd like the cheapest solution for 3-4 x 10 Gbps links to 2-3 PCs and a NAS.
Basically the way I have the network setup is in my office are all the runs to the main switch and then underneath our family room TV I have all the runs for the eight cameras plus two separate runs to the office; just in case I wanted to keep everything air gapped and separate.
Thanks. This probably would be easier to email. So if you have an email post it and then you can delete the email address or point me and the right direction.
@@DJaquithFL Sorry but we only do them for our clients in Florida/Georgia. You might want to look on the Ubiquiti channels on Facebook and Reddit for a local installer that can help you out.
@@DPCTechnology .. I'm in Florida.
@@DPCTechnology .. You're a couple hours away. 291 Southhall Ln #101b, Maitland, FL 32751 I'm in Lakewood Ranch, FL.
Why does no one show the FOV's when they are mounted in the corner of a room?
Man, we just took down all our cameras for an office renovation. I will make sure to get that angle in our next video when we put the new system up. The renovation is going to take a couple of months.
@@DPCTechnology Thank you :)
So is the g4 bad still?? Just ordered 5 of them
It's a great camera. You'll be happy
can you set up Unifi cameras with audible alarm? Or would Ring spotlight cameras be better for audible alarm/siren?
You could with something like www.npmjs.com/package/homebridge-unifi-protect
@@DPCTechnology do they got anything like this for home assistant ?
@@chriscarr1791 I am not sure. The reddit groups is where i would look..
The G4 documentation said it supports flash memory, does it have an SD card slot for recording playback from the app?
Which one?
I bought 4 - 4G Pro's and am very worried about how dark the images are.
You can adjust the image to taste. Or are you talking about the ir emitter?
Have you had any issues with the G4 bullet and the image quality? I saw on both Reddit and Unifi topics that some people complain about the quality of the image. I’m about to buy either a flex or a g4b for our outside covered porch and can’t decide.
I love my G4 Bullet, the smart detections make it a no brainer. If u don't need them and the mounting area has some cover (not direct weather) then the flex is great!
@@DPCTechnology thanks for the info. Yeah the porch it would be on is covered and it be far enough back to stay protected. It currently has a nest cam which apparently has a better sensor than the flex. Which makes me nervous as I don’t want to really downgrade the picture.
@@Subliminal87 The G4 sensors are really nice and the smart detections make looking through the data so much easier. You won't be disappointed.
@@DPCTechnology thanks!
Everything in my home is unifi udm pro 24 port pro switch 2 wifi6 ap pros. My only issue with cameras is you can get same or better quality for much cheaper. And I hate it
There are pros and cons. I think the ubiquiti value is fair. It's not the most expensive and not the least. The UDM brings nice central management of a lot of things...
how quick are the push notification for alerts? im very interested in the G4 Pro & Bullet combo with UDP
Just tried it out and they are super quick!
No Unifi G3 instant camera?
have one on order :) will review
The only thing I would say is with all of those camera's on at the same time at night. It is a slightly mislead video. Because there is an awful lot of ir being sh from all of the camera's at the same time. Not saying this is bad because it was a great comparison between the cams.. thank you.
Agreed, I should have turned them off in software.. They all got the same unfair advantage but I agree, I was an idiot.. LOL, Next time!
@@DPCTechnology that would have taken a lot more time to do though.
I still love the comparison you guy made. So thank you.
@@undergod1987 Thanks for the feedback!!
@@undergod1987 This helped me make sure I turned them off in the new G4-PTZ video... thanks for getting it on my to-do list b4 filming!
Fogging is still an issue in 2022, FYI.
I know 😢
I'm glad I didn't purchase the pro. That fogging issue is crazy for such an expensive camefa
The good news is it resolves itself pretty quickly and it's a really nice camera long-term. But yes, it's silly that such an expensive camera would have an issue at all
The company stock is at $300 per share and they have nothing to sell. Everything is sold out unless you want to pay scalpers prices for the cameras on Amazon.
Crazy
I swear you and Fred Armisen could be cousins
😂😂
If you install these for clients, and want them to work "right away", you might want to try running all the cameras for 72hrs first on your own site to get rid of any condensation, then repack them, then redeploy them.
Great point. Testing is essential..
You missed the G4 dome
I have one on preorder.. Ill review it as soon as its in my hands..