Bye Bye, Cricut! Hello, xTool M1 Ultra! A DIY Crafter's Dream Machine!

Поділитися
Вставка
  • Опубліковано 23 лис 2024

КОМЕНТАРІ • 101

  • @christinamalcolm8072
    @christinamalcolm8072 Місяць тому +8

    Don’t underestimate yourself. I literally put your videos on to listen to during my commute because you’re so much fun to listen to.

    • @fiercekittenz
      @fiercekittenz  Місяць тому +3

      Thank you :) This was a nice comment to wake up to read!

  • @turbo0589
    @turbo0589 3 місяці тому +8

    Can't wait for your upcoming videos for a more specific look at all the different modules! Really considering this machine!

  • @donamartin1217
    @donamartin1217 3 місяці тому +8

    I have this machine!! I love it. We'll worth the expense. But the video is more of a review than the instruction I was looking for.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому +9

      Oh no I'm sorry :( Yeah I mean to do MORE videos to break out some of the features and go deeper on them. Do you have specific questions or topics you'd like me to cover?

  • @hollydawsonjames1999
    @hollydawsonjames1999 2 місяці тому +1

    Good for you, I am a huge fan of my Brother Scan N Cut, have two my older baby I’ve used for 8 years and my new love child I bought last year…yep, it’s amazing the speed and improve they have made
    Good luck with your new baby

  • @CraftyReporter
    @CraftyReporter 3 місяці тому +3

    You are so rad! I love your personality and content. 🩷

  • @Leshkee
    @Leshkee 3 місяці тому +2

    Thank you so much for this video. I think after I move, I will see if I can make enough extra money to get one of these. I've had my eyes on the M1 and I am totally thinking this would be a great fit for all the things I would like to do for funsies.

  • @NemoMeImpuneLacessitNevermore
    @NemoMeImpuneLacessitNevermore 3 місяці тому +9

    I love your rambling. 😂 Life begins at 40. 😊

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      This video was just over 30 minutes long and I just HAD to cut it down. I went into too much detail :( I really do think it'll be better to split things up into smaller chunks of content. I do need to weave in some sewing stuff though! I'm in the last 2 weeks of DragonCon crunch and have 3 costumes to finish. I'm freaking *out*.

  • @vanessacollins3997
    @vanessacollins3997 3 місяці тому

    Your video for the X Tool M1 was very informative . I am right now on the fence on which laser tool to use. Cost and ventilation are the issues for me But is seems easy to use. Still thinking about it. Thanks for the video!!!

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      I like this one for its versatility - plus technically it's saving space in my room by replacing the Cricut and 10W laser.

  • @chuckvoss9344
    @chuckvoss9344 2 місяці тому +39

    Why not compare items that are about the same price? Not something that is 5 times more expensive.

    • @fiercekittenz
      @fiercekittenz  2 місяці тому +6

      You didn’t read any of my responses, did you?

  • @drewpickard554
    @drewpickard554 3 місяці тому

    I like your videos and the "rambling". I've been wanting a ultra, for the cutting and esp the inkjet parts. But one thing you mentioned that I haven't seen elsewhere, you can leave the rotary setup and put the top on. Now that's a killer feature, I think it makes sense in some ways to have a dedicated rotary machine. So being able to do the cutting and inkjetting and some cuts while being able to just pop the top off to do cups, boy that's awesome

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      It was super helpful to be able to just hide the rotary away like that, because I needed to get the big bottle boot order done, but also make sure I was available to help my kiddo cut her stickers out when she was done making the artwork.
      I also just showed a friend how to use the M1 Ultra to cut several stacks of English Paper Piecing shapes in one go. I think she's hooked...

  • @Sheko-vm1xs
    @Sheko-vm1xs 11 днів тому

    Hi there, which machine is good fot cutting and fold marks?
    Thanks for your video 🙌🏿

    • @fiercekittenz
      @fiercekittenz  10 днів тому +2

      It really depends on how big your material is going to be. The M1 Ultra has a 12x12" work area, but the S1 has a 20x12" work area. I use the M1 Ultra for smaller items and the S1 for larger. I also have a Thunder Nova 35 100W industrial laser if I have HUGE things to cut, but it's in the workshop/garage.

  • @divasjazz8946
    @divasjazz8946 15 днів тому

    It was nice to come across your video. I want to look into more info on the different cutting machines. I don't have a cricket, but thinking of a machine that allows me to do different things. I hate buying something, and then something better comes out. I prefer to make smart investments. Look forward to your other videos.

    • @fiercekittenz
      @fiercekittenz  15 днів тому

      I'm like you on this front. xTool iterates quickly, but the previous versions of their machines are still supported. The original M1 came out last Spring, now we have the M1 Ultra just a smidge over a year later. The same for the F1 -> F1 Ultra. They are learning, adapting, and making these lasers a lot more user-friendly. Of all of my lasers, the M1 Ultra is my favorite now BECAUSE of its versatility. Before my runDisney trip last week, I was using it to cut cardstock for templates for a bag pattern I was working on.

  • @bjsmithart
    @bjsmithart 14 днів тому

    Thanks for this video. I was actually looking at a Cricut to make stickers to sell along with my art at a gallery. I also have a 40w CO2 laser that I use to cut paper art, but it’s cheap and requires lots of maintenance. I’ve been thinking about getting a cutting machine for the paper instead of using the laser since I can’t get too detailed without starting a fire. I also use the laser for engraving wood and fun little projects like Christmas ornaments. Maybe something like this would be good for the stickers, paper cutting art, and the laser projects. I wonder if the blade can cut the level of detail I need.

    • @fiercekittenz
      @fiercekittenz  14 днів тому

      Is there something you'd like me to test? I don't mind giving it a try!

  • @joebloggs2282
    @joebloggs2282 2 місяці тому +2

    Thanks for a good video. What I am curious about being a complete novice is … are all Xtool lasers basically the same. What’s the difference between the M1 ultra 20w compared to say the 20w S1?. Do they cut the same etc…

    • @fiercekittenz
      @fiercekittenz  2 місяці тому +2

      No they're not the same. So the 20W laser head between the S1 and M1 Ultra is the same power, but the machines are different. The S1 is only a laser. It has a bigger bed (20x12) and you can upgrade it to use a 40W module or the 2W IR module. The M1 Ultra can be 10 or 20W (interchangeable heads!), blade cutter, rotary cutter, inkjet, or pen machine. It's got a smaller bed area, mostly just working in a 12x12 inch space. It just depends on what it is you want to do.
      I use the M1 Ultra for a mixture of crafty things and smaller engraving projects. I have the S1 20W that I use for cutting fabric or larger items. It's so so so cheat mode to be able to do this for doll clothing.
      Both can use the RA2 Pro rotary accessory for doing tumblers, bowls, or other items too. I feel like the M1 Ultra is a space saver because it combines the Cricut with a laser. It's great for a beginner who wants to do a little of everything, but not any one thing particularly well.
      I have probably made things more confusing, so don't hesitate to keep asking questions. I will clear things up as best as I can!!!

  • @EverydayKindaGuy
    @EverydayKindaGuy 3 місяці тому +4

    ... Laser X Cricut... So it was a... Licut?
    Snazzy snazzy. M1 Ultra looks like a cool machine.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому +2

      It's a lot of fun! The first pass at the M1 was good, but didn't have a rotary blade cutter at the time, so I couldn't do a whole lot with it. But now I have a machine I can turn on and churn out tumblers, stickers, bag pieces, etc.

  • @diane_nz1252
    @diane_nz1252 3 місяці тому +1

    I’d be keen to see how it goes engraving & cutting cork

  • @bertfarry3793
    @bertfarry3793 25 днів тому +1

    One reason the inkjet is poor is no black ink. By mixing just the cmy to make Black make a dark brown

    • @mikabreto
      @mikabreto 4 дні тому

      @@bertfarry3793 that is the ick for me. But the next step up is the Roland BN-20 @ $2500, and I can’t swing that vine.

  • @bettydarling2445
    @bettydarling2445 3 місяці тому +8

    Great overview. I hope to see video on cutting fabrics of all weights - cotton, vinyl, WPC, interfacing (although heat may be bad with fusible). Maybe fuse interfacing on yardage then laser cut? I would like to see how it does with card slots, particularly the ones that have the holes at the end - Cricut hates those! I have all the tools on my Cricut but don’t use them and have a had time cutting fabric for some reason.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому +6

      Ooooh yeah that's a GOOD one. I'll do a video on JUST the fabrics. If it's a single layer of fabric, or a fabric with PVC content, I'd just use the cutter. If it's several layers of fabric and no PVC, I'd 100% use the laser portion to cut.
      The Cricut just can't hack at the smaller holes or rounded corners. I wonder what the other bagmakers have been doing for those? Just leather punching tools? I haven't made a wallet in ages, so I'm a little behind on the trend of using WPC or vinyl for card slots.

    • @bettydarling2445
      @bettydarling2445 3 місяці тому +1

      @@fiercekittenz if you have the Linds Handmade PursePal or PocketPal that is a good example of vinyl for card slots, narrow snap tabs and HTV for lining. What format does the cutting tool use - SVG. Looking forward to a video.

    • @lucied2725
      @lucied2725 2 місяці тому

      @@fiercekittenz yes please !!

    • @pauln6917
      @pauln6917 2 місяці тому +3

      Can't do PVC, releases chlorine gas, this combines with moisture and becomes hydrochloric acid.

    • @fiercekittenz
      @fiercekittenz  2 місяці тому +3

      @@pauln6917 THIS!!! Super super dangerous! I try to call this out in all of my laser videos, because the sewing crew that watch my content may not realize it!

  • @Laserfuntime
    @Laserfuntime 3 місяці тому

    Ink can be refilled with a syringe. That way you don't have to buy new ones. I think it is a maximum of 5 ml per colour.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      I thought of this, but I haven't done it myself yet. I didn't want to mislead people or act like an expert.

  • @Shanak8177
    @Shanak8177 Місяць тому

    I like your personality. Thank you. Looking for something my daughter may love. Brand new first time mommy.

  • @angelabeasley865
    @angelabeasley865 3 місяці тому +1

    Is this something i could use to make achrilic templates for my bags?

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      No. This is a diode laser, so it cannot cut clear acrylic, only solid, black acrylic. You could cut wood, cardstock or cardboard though!

  • @StevenDoornbos-xo5jb
    @StevenDoornbos-xo5jb 2 місяці тому

    If you pre coat your wood with clear liquitex, let it dry, then print you’ll get high quality prints every time.

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      OH! I'll have to try that! I want to do a print-to-wood tutorial soon!

  • @PhilbrookHandcrafted
    @PhilbrookHandcrafted 3 місяці тому +4

    That is so cool!!! I love to hear you ramble. You crack me up.

  • @abbyhe4245
    @abbyhe4245 3 місяці тому

    I love this macihine! So cool.

  • @lalasstickercreation
    @lalasstickercreation 2 місяці тому

    Ok, I liked, subscribed and saved I want to see what you make , might even get one, price is not bad

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      Thank you! I'm heading out to DragonCon tomorrow. I'm hoping to squeeze in a video before I leave so there isn't a huge break between video content.

  • @zina6581
    @zina6581 2 місяці тому

    Awesome! Thank you!!

  • @YouTubeForGrownups
    @YouTubeForGrownups Місяць тому

    Brilliant review and heck you are funny. Subscribed

  • @sarithaprashanth_23
    @sarithaprashanth_23 2 місяці тому

    Can you make a video of comparing Xtool s1 and Xtool M1 Ultra? Am confused which one to buy

  • @Shadigun00
    @Shadigun00 3 місяці тому

    can u print out stickers, laminate, add sticker outline on program, line up and cut

    • @fiercekittenz
      @fiercekittenz  3 місяці тому +2

      Yes you can. You can do this all on the M1 Ultra. I have an Epson Tank-based inkjet printer though and will print using that then line up for the cuts on the M1.

  • @FleurdeLinda.Stitches
    @FleurdeLinda.Stitches 3 місяці тому

    What do you do with all the lasers that you get sent, but don’t use because of the vast improvements being made? I’ve been watching long enough to think they probably stack up to your chin! 😂
    I have the S1 40w and still learning about it. Not being able to cut vinyl is disappointing, but I like breathing.
    I feel like the S1 is overkill for what I’m doing and think the Ultra is better suited for me now.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому +3

      I have kept most of them!!! Usually what I do is if it's one I can't keep or wouldn't replace one of my current lasers, I give it away to a friend or donate to a local school's maker lab. The speed at which lasers have become more consumer-friendly and accessible to DIY crafters in the past year is BONKERS. To iterate this fast on the M1 to get the M1 Ultra blew my mind. It is also really scary to invest $800+ on a machine that will drastically improve in a year's time. For a hobbyist, that is frustrating. As a business, I know that in 1-2 months I'll more than have paid it off.
      Take the bottle boots as an example. I did 100 of them spread out over a couple of days and charged wholesale pricing. My net was $400 after deducting materials and time.

  • @daniellepierson8821
    @daniellepierson8821 3 місяці тому

    Thank you for this great video.

  • @jimkoss3318
    @jimkoss3318 2 місяці тому

    How does the X Tool interface with the operator? Can I input a picture drawing, or mechanical drawings? Is there a 3D printer option? Are the cutter blades replaceable and how much are they?

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      xTool has their own software (XCS) but you can also use Lightburn for the laser side of things. Personally, I prefer using their software to drive the machine. I design everything in Illustrator these days anyway. You can insert pictures or SVG (vector) graphics into the application and engrave/score/cut. There is no 3D printing option. This isn't that kind of machine. Cutter blades ARE replaceable - and I guess maybe a buck each if you buy them in bulk? I'm told the Cricut blades work as replacement, though I haven't tried that myself yet.

    • @jimkoss3318
      @jimkoss3318 2 місяці тому

      @@fiercekittenz Thanks for responding. Which brings more questions. By “insert pictures“ are scanned images ok, or some other image file?

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      @@jimkoss3318 Could be either? I mean, pictures... JPG, PNG, SVG, etc.

    • @jimkoss3318
      @jimkoss3318 2 місяці тому

      @@fiercekittenz Thanks. Something to consider

  • @jfratis9081
    @jfratis9081 Місяць тому +1

    Subscribed because you only used the word "literally" once.

  • @keleeshamarley7178
    @keleeshamarley7178 3 місяці тому

    Thank you for sharing.

  • @suzytsaab388
    @suzytsaab388 9 днів тому

    Love your personality

  • @sugarsweet04
    @sugarsweet04 Місяць тому

    Hello,,i just want to ask,,when did you start your business? Thanks 😊

    • @fiercekittenz
      @fiercekittenz  Місяць тому +1

      Waaaaaay back in 2005!

    • @sugarsweet04
      @sugarsweet04 Місяць тому

      @@fiercekittenz it's been a long time ,, congrats 😊😊

  • @jasonhurdlow6607
    @jasonhurdlow6607 2 місяці тому

    I still don't understanding why they make these things so small. I'd want something at least twice as big on each dimension. Otherwise, very cool device!

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      I think it’s a struggle to make something that does so much and doesn’t take up a ton of space.

  • @DonJuravin
    @DonJuravin Місяць тому

    Thanks!

  • @Aangel452
    @Aangel452 3 місяці тому +1

    Thanks for this good report on this 3D printer, can you keep sharing as you progress with it please😀

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      I will!! I want to cover cutting fabric with it first, then doing a full stickers tutorial.

  • @renar11d11
    @renar11d11 3 місяці тому

    I love your candid videos but cannot watch the 'shorts ' due to UA-cam nonsense on last update.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому

      I'm sorry :( I don't have any control over that.

  • @rusty-y8r
    @rusty-y8r 2 місяці тому +3

    1000 dollars tool is not within my reach

  • @nikkied76
    @nikkied76 2 місяці тому

    I'm sure its cool but it will be in my wishlist for a while at that price point :(

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      That is very understandable. You're not alone in this. I recognize the privilege in having received this machine to review.

  • @gomezsandy
    @gomezsandy 2 місяці тому

    I still don’t understand how it avoided the Tumblr handle tabs

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      I made sure the design was not in the region occupied by the tabs. The top of the rectangle is the starting point, which was on one side of the tabs, then ends at the bottom of the rectangle, the opposite side of the tabs. The tabs on these tumblers are 1cm wide, so I just kept the design centered in the rectangle guide, about 0.6cm away from either edge.

  • @NicaMiller
    @NicaMiller 3 місяці тому

    I gotta know how long you did the cricut cosplay while filming lmfao

  • @nadiacusan3799
    @nadiacusan3799 2 місяці тому

    this machine is probably more expensive then the cricket

    • @fiercekittenz
      @fiercekittenz  2 місяці тому

      Yes. It does. It's not just a Cricut though. It's a Cricut, an inkjet printer, and a laser with an enclosure, air assist, inline fan, and hose. I have to question comments like this. Did you even bother watching?

  • @SewFelicia
    @SewFelicia 3 місяці тому

    ❤❤

  • @dmariebella6309
    @dmariebella6309 3 місяці тому +1

    That thing is bloody expensive.

    • @fiercekittenz
      @fiercekittenz  3 місяці тому +5

      Yeah they can be :( A lot of the general crafting stuff is these days. IMHO this one's a good space saver as it combines several machines into one. I freed up a storage shelf by offloading my Cricut.
      NOT trying to convince or be combative, just offering my perspective here - I could spend the following to get the equivalent in several machines:
      Cricut Maker 3: $429
      Cricut Rotary Blade: $19
      Cricut Mat (just one 12x12): $10
      xTool D1 10W with Enclosure: $499
      Cheap cartridge-based inkjet printer: $85
      Total cost: $1,042
      OR... get the M1 Ultra 10W basic bundle for $1200 and not need 3 machines.
      ALL THAT SAID........................... not everyone can afford that, nor should anyone feel the need to save for something like this unless they think it'll enhance their joy in a hobby or build on their small business.

  • @AlexSwavely
    @AlexSwavely 3 місяці тому

    neat

  • @vampiregoat69
    @vampiregoat69 Місяць тому

    NOT smart as those machines have to be vented outside is dangerous inside with all the fumes. So spend THOUSANDS just to do what a cricut can do for WAY cheaper, of course some things the cricut can't do compared but WAY cheaper. Also have to change out modules everytime you want to do something different seems a bit overboard but seems cool in theory

    • @fiercekittenz
      @fiercekittenz  Місяць тому +1

      Of course a laser has to be vented, which is precisely why I covered that aspect of the machine. It's also not "thousands," as that would imply that it is over $1,999. A Cricut cannot cut 6mm basswood or 3mm black acrylic either, nor can it laser engrave tumblers. You seem to be confused about the machine. Is there anything else I can clarify for you?

  • @VictoriaRoss-uw6kr
    @VictoriaRoss-uw6kr 2 місяці тому

    Are you Sue from LUNCH programme ?

    • @fiercekittenz
      @fiercekittenz  2 місяці тому +1

      Nay. I am Kittenz from Sewhalla.

  • @unclerichard6729
    @unclerichard6729 21 день тому

    Wow! What a HUGE waste of money. For what they charge for that diode laser you could have got a really good co2 laser and been much, much better off.

    • @fiercekittenz
      @fiercekittenz  19 днів тому

      True, but it would be higher power, have wider focus, and not be able to engrave high detail. The higher the wattage, the less detail you’ll get. Diodes are excellent for engraving. I actually prefer my diodes over my one CO2.

  • @marklola12
    @marklola12 27 днів тому

    The printer ink add-on is crap though. Colours are muted and dull as hell its shockingly bad
    How they thought this would he acceptable quality for something that costs so much lol
    Its not suitable just to use to give the final items to friends as its worse quality than a printer from decades ago... literally

    • @fiercekittenz
      @fiercekittenz  27 днів тому

      I don't use the inkjet module :( I have an Epson ET-2850 and much prefer that. I think the inkjet module on here is good for some things like printing to wood. I'm going to cover that in an upcoming video!

  • @vernelfpv
    @vernelfpv 9 днів тому

    😂😂😂

  • @stephenbell8323
    @stephenbell8323 2 місяці тому +2

    Nar, you waffled on too much at the start of this video. It turned me off so much that I couldn't watch the whole thing, just being honest.

    • @fiercekittenz
      @fiercekittenz  2 місяці тому +4

      Thank you for your feedback! Next time I'll make sure to waffle more, but add a clip of me pouring maple syrup over my face so it's more tolerable for you to enjoy. Just being honest.

    • @stephenbell8323
      @stephenbell8323 2 місяці тому

      @@fiercekittenz One thing in your favor, you didn't start off by saying, "Whats up youtube".
      If you had done that I would have stopped watching quicker. Lol