Upgrade the Old Audi R8 Steering Wheel with a Working Push Start Button: Part 1
Вставка
- Опубліковано 27 лип 2024
- This is the first part of the series detailing how you can install a push start button on your older Audi R8 cars using the Gen 2 (2017+) Audi R8 factory wheel. I walk you through how to remove the old steering wheel and modify the existing airbag connector to work with the older Audi R8 cars.
This is made possible by a kit from Ambrace: www.ambrace.eu/
Support:
How to support me? Buy Me a Coffee. Every little bit helps as I build more cool stuff to share with you: www.buymeacoffee.com/ftwgarage
00:00 Intro
01:57 How the Ambrace Kit Works
05:48 Remove Gen 1 Steering Wheel
09:40 Removing Terminal Pins on the Gen 2 Airbag Connector
17:00 Repinning the 6-Pin Connector into a 4-Pin Connector
18:10 Mistakes were Made. Double Check the Pins!
20:00 Completed Airbag Harness
Tools You'll Need:
T-25 Torx to remove various trim pieces on the steering wheel column
M12 Triple Spline to remove the steering wheel lock nut
Torque wrench
Blue Loctite
Various picks, especially the 90-Degree Pick (very important you have this)
Terminal Pin Removal Tools
Music Credits:
------------------------------
Autumn 2011 by Loxbeats spoti.fi/34tPBBO
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/autumn-2011
Music promoted by Audio Library • Autumn 2011 - Loxbeats...
------------------------------ - Авто та транспорт
FINALLY FOUND MY KINDA R8 CONTENT
If Audi would only release an R8 with the Gen 1 facelift design , gen 2 interior and a manual gated gearshift
Thank you for thie detailed video! you are appreciated!
Thanks ❤
So you have to buy the new steering wheel with a new air bag or the original air bag will fit the smaller new cap?
You need a new airbag along with the new steering wheel.
Thanks ❤
You're welcome 😊