Minimotors EYE (EY3) Throttle Display | Features, P Settings Guide | Kaabo, Dualtron, Speedway

Поділитися
Вставка
  • Опубліковано 3 кві 2021
  • This is a P-Settings guide for Minimotors EYE (EY3) Throttle Display on scooters like Kaabo, Dualtron, Speedway. Knowing your P settings is very important, because you can get to enjoy your e-scooter's full potential by doing your personal tweaks on these settings.
    Some people don't treat this as important, but once you get to understand everything about it. You can maximize your escooter whether you want the fastest set up or tone everything for a range set up.
    In the video, I've discussed the full features of the throttle, including the
    Aesthetic
    Throttle
    Buttons
    LCD Display content
    P Settings
    - P0 - tire diameter*
    - P1 - Voltage*
    - P2 - Magnet*
    - P3 - Speed Signal*
    - P4 - KM/Miles (metric system)
    - P5 - kick start
    - P6 - Cruise Control
    - P7 - slow start
    - P8 - Speed limit/Power Output
    - P9 - Torque Control/Power Saver
    - PA - Ebrake/Rege
    - PB - LCD Brightness
    - PC - Auto Shutdown (like screensaver)
    - PD - Auto Braking System (ABS)
    I also mention my preferred set up depending on the ride:
    Short but Speedy Rides
    P7 - 0
    P8 - 100%
    P9 - 3
    PA - 1**
    For city rides (normal days)
    P7 - 3
    P8 - 75%
    P9 - 3
    PA - 3
    Enduro/Long Rides
    P7 - 3
    P8 - 50%
    P9 - 2 (when battery above is 50%); 1 (when the battery is below 50%)
    PA - 3
    *Do not change
    **I lower down the e-brake for speedy rides because I don't like the delay it causes when you transition form braking to pulling the throttle. Usually, for electric scooter race, we get rid of the electric braking to remove even a hint of delay in the acceleration.
    ➡️➡️➡️➡️
    Please subscribe to my channel, and check out my other social media accounts!
    Arts & Comics: / milkandcoffeeadventures
    E-scooter: / francomoje
    If you link my content, please consider donating: buymeacoffee.com/MilkAndCoffee
    Music: Water Wood And Stone
    Musician: Jason Shaw
    URL: audionautix.com
  • Авто та транспорт

КОМЕНТАРІ • 49

  • @rodrigocarvalho3327
    @rodrigocarvalho3327 Рік тому +1

    Thank you very much greetings from Portugal

  • @regiebatadlan1623
    @regiebatadlan1623 2 роки тому +1

    very helpful, thanks for this. I'm new to this EY3 Display, coz my first scooter was Ninebot Max which has simple settings. ;-)

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  2 роки тому

      Hopefully it answers your questions about ey3 throttle. Don't forget to subscribe, I'd appreciate it.

  • @vossinnicucal5138
    @vossinnicucal5138 3 роки тому +1

    Thank you for this! Hello from Iowa(:

  • @francocoffee7941
    @francocoffee7941 3 роки тому +1

    Kudos man!

  • @Mr_honhon
    @Mr_honhon 3 роки тому +1

    very good explanation of the display you summed it all up in great detail your video

  • @davidmichael3189
    @davidmichael3189 2 роки тому

    Very Good. Thanks.

  • @mommyevenibotatweiss3890
    @mommyevenibotatweiss3890 3 роки тому +1

    very nice sharing of info 👍

  • @Technotrad3r
    @Technotrad3r 2 роки тому +1

    Thanks so much bud

  • @jamesyurky3048
    @jamesyurky3048 3 роки тому +1

    Thanks that will be a big help when mine shows up, I’m not a big fan of ABS breaks on any thing, that will be the first setting I’ll definitely turn off.

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  3 роки тому +1

      Me too. I don't like the vibration of the ABS, 'cuz it could cause some loose nuts and bolts.

  • @neetaskitchen1857
    @neetaskitchen1857 3 роки тому +1

    Big lykee 👌 thanks

  • @aldousbwilson
    @aldousbwilson 2 роки тому

    Does making the tire diameter setting, smaller than the actual tire of the vehice , trick the computer thereby increasing the speed of the Dualtron vehicle???

  • @paullinford6113
    @paullinford6113 3 роки тому +2

    Thank you, great video. How do you change the P0 setting back to the default value? I accidentally changed mine!

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  3 роки тому +1

      Thank you for watching. There’s no way to reset it, but what you can do is to keep pressing it until it goes back to the lowest number, then work your way up again to the correct digit, which is 10 for 10 inch tires, and 11 for 11 inch tires.

    • @paullinford6113
      @paullinford6113 3 роки тому

      Thanks this works, but the value does not reset until you click past 30. Thanks again!

  • @ReelInsights1
    @ReelInsights1 3 роки тому +1

    how to reset the setting if I mistakenly did more

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  3 роки тому

      You just need to continue pressing the button. Unfortunately, there's no reset function on the this.

  • @nicolewilson3886
    @nicolewilson3886 2 роки тому +1

    Great video! I accidentally changed some settings I didn't mean to, how do you reset the eye throttle back to factory settings if you've messed it up? Thank you for your help!

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  2 роки тому +1

      There's no factory reset button. You have to set it up back manually by pressing the button until it goes back to your default.

    • @nicolewilson3886
      @nicolewilson3886 2 роки тому

      @@MilkAndCoffeeAdventures Ok thank you!!! Will do!!

  • @lukazgaming4755
    @lukazgaming4755 6 місяців тому

    How do i decrease wheel diameter

  • @artplastplastic
    @artplastplastic 11 місяців тому +1

    Does the P2 value affect the speed ? In manuel of my Achilleus writing "15" for my scooter but this value came to me as "10".

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  11 місяців тому

      Just keep it on your factory settings. It counts the magnet on your motorhub.

    • @byildirrim
      @byildirrim 11 місяців тому

      @@MilkAndCoffeeAdventuresyes, but im going with max 40-45 km/h with “15”. When i change it as “10” ( this value writing in Achilleus manual) im going with 80-90 km/h :) how it can be possible ?

  • @marceloallende8450
    @marceloallende8450 6 місяців тому

    my scooters charges to 85% battery max, how can i charge it to 100% :(? its a futecher gun minimotors

  • @joeffreyduranreyes5837
    @joeffreyduranreyes5837 Рік тому

    Hello po bakit hanggang 50% lng ang charges ng dualtron mini ko?
    Thank you

  • @ACB1161
    @ACB1161 3 роки тому +1

    Hi, I was wondering if the scooters have bluetooth and an unlocking system

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  3 роки тому

      Nope there’s none. But you can install something similar like key ignition or finger scanner or remote.

  • @chuckmaddison2924
    @chuckmaddison2924 2 роки тому +1

    Hi , I have a Skywalker and have adjusted P settings so now gone from 25 to about 40 kph. Was wondering if anything else can be done to get bit higher. 50 would be nice. Thank you.

  • @christianyoung405
    @christianyoung405 3 роки тому +1

    Good overview of the settings. I just got the wolf king and took it out for a test run to get a feel for the mileage. The battery was depleted after some 60-65km but afterwards I can barely get 45km before the battery is depleted. Any advice on whats going on ?

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  3 роки тому

      I assume you meant distance. It depends on the rider's weight, or perhaps you're always on full speed?
      I run like 25-30kph, I usually can extend the battery around 90km distance. But if I go speedy, It can take me like 70km~
      I weigh 80kgs.

    • @christianyoung405
      @christianyoung405 3 роки тому

      @@MilkAndCoffeeAdventures yes distance. I'm roughly 80kg as well but I'm unable to get more than the aforementioned 45km before the battery is empty. I'm mostly staying in first gear topping around 45kmt. The 45km I'm getting is a long ways from the 70km youre getting.

    • @originalityisdead.9513
      @originalityisdead.9513 Рік тому

      Milk And Coffee Adventures Can you stop the Ey3 from turning off when the scooter is idle?

  • @robindarby1679
    @robindarby1679 Рік тому

    Hello I have a problem my display keeps flashing hope you can help me to resolve this problem thanks Rob…

  • @rocksingh2523
    @rocksingh2523 2 роки тому +1

    panu po pag may power lang siya pero hndi umaandar anu po ggwn salamat

  • @killerkt9
    @killerkt9 2 роки тому +1

    How to reset p settings, can dial down

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  2 роки тому

      There's no reset, but I suggest you keep pressing it until it goes back to the lowest and then set it to your desired setting.

  • @parkflyer2191
    @parkflyer2191 2 роки тому

    is your display really light blue?

    • @MilkAndCoffeeAdventures
      @MilkAndCoffeeAdventures  2 роки тому

      It's actually green. It's weird that it appears blue when uploaded on youtube.

  • @LifeWithStiel
    @LifeWithStiel 2 роки тому

    P2 should be at 20

  • @laetitialeroi6753
    @laetitialeroi6753 2 роки тому

    OK salmat po for your réalisation of setting dualtron. Control it was super explain g.. Laetitia de verviers en Belgique pianiste en live transgender.. From belgium pianist on meet me and lovoo if you désires to see me on thé platforms of internet... Maouw
    My friend
    .. God blés to you...ok.. '.