Minimotors EY3 Display Overview
Вставка
- Опубліковано 30 лип 2024
- Full overview of the Minimotors EY3 display, which will walk you through the details and everything there is to know about the display. We discuss how to read it properly, adjust general the settings and advanced settings. The MInimotors EY3 display is commonly used on Dualtron scooters and as well as the Kaabo pro model scooters such as the Kaabo Mantis and Wolf Warrior models.
If you are looking to purchase a Minimotors dispaly you can at epiccycles.ca/product/spare-p...
Rent Scooters: berseo.io/#via=epic - Спорт
This was great, so helpful and clear thanks man
This is the gold standard informational video! Instant subscribe!!!
thanks for providing the correct display values! greetings from Portugal
You guys should go through the Advanced settings on the Wolf king gt pro . They're a lot of buttons that I’m unsure of .
Yes, we do plan on it. Will release a video of the Wolf King GT PRO TFT display in the coming weeks.
Is it possible to swap the display on the new mantis v2 for this one? I feel like this looks way nicer and less cheap than the new one they swapped this one for.
Thanks for the great and detailed video. I have a kaabo wolf king gt pro with EY3 controller and unfortunately my buddy messed around with it and now battery shows 50% with 83.4v and the charger led is just green and not turning red. Any idea what's wrong with my scooter?
Thank you very much in advance.
It's possible that he changed the voltage settings. Yours should be set to 72V
Hi, thanks for your video. I'm Orlando Tristão and I'm from Portugal. There is no Dualtron technical assistance here and I need to know how to diagnose and identify faults in the Dualtrons, could you help me? I'll be very thankfull. I take the opportunity to ask if the Display can give information about engine or contractor failures, etc? Thank you very much. Compliments
So my wolf warrior 11 shows a 100 percent charge all the time, which im sure isn't accurate. Is there a way to fix that somewhere in settings?
No, that can't be accurate. What does the voltage say? This is a more accurate reading anyway. 67V would rerpresent full charge while 54V would represent an empty battery.
how do u know how many motorpoles a motor has? i've counted the magnets but they are way more then 20
The manufacturer usually will set it accordingly depending on the scooter. This is something that facotries usually set one time and should not be changed. There is alwyas the chacne they did not do it correctly so you can always verify with them depending on which model you have.
Hello I hope you can help my light keeps flashing on the display how do I resolve this problem cheers Rob …
Hi Robin. Thanks for reaching out. Is there any error code flashing when you turn on the display? Is the light just flashing or does something on the scooter fail at the same time ( ex. the motor cuts out )
I can’t get my blade x to connect Bluetooth to the app
quand j'appuie sur mode y a rien, pas de changement, qui c'est ?
Hey so my scooter out of the box would go 55-60 mph now I got the ey3 replaced bc I crashed now it only goes 50 top
check the settings, it's probably not set to 100% power
Is the EY3 display waterproof by default?
Water resistant to some rain, no submerged.
I need a vídeo about the wiring, I bought one but I don't know how to connect it :(
the wiring for the EY3 display? What scooter are you using it with?
@@epiccycles9 None, its an ebike with the aliexpress kit
Mine Is flashing off and on while I accelerate do you know why ?
Hi Luke, It blinks when it’s low on power as way to tell you that it needs a charge or will die soon.
Friends, please help. I have a problem, the speedometer does not work, it constantly shows the speed "00", the odometer and charge counter also do not work. at the same time, the scooter drives normally and switches gears. scooter new name Teverun Blade Mini Pro.
You should of explained pole magnetics:)