1 9 7 6 Bench Polisher Restoration | fix It won't start by itself
Вставка
- Опубліковано 15 сер 2022
- This is a 220V bench polisher from Singapore, made in 1976. It won't start by itself because the internal switch doesn't work properly. This grinder doesn't need a starter capacitor.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show - Навчання та стиль
Nice job. The fabric super glue trick was brilliant! I will add that to my bag of tricks for the future for sure.
Glad it was helpful!
@@gear_show Make sure you have some acetone around cause that stuff takes a bit to dry and when you don't think about it your fingers are glued together. Been there done that.
Nyj7hģ8ju0
7😊😅😅😅😊😊😅😮😢😂❤😊😅😮😮😢❤❤
Nyj7hģ8ju0
7😊😅😅😅😊😊😅😮😢😂❤😊😅😮😮😢❤❤
Nice restore. I have a bench grinder that was made in Singapore/Malaysia from around the late 1970's/early 80's too and it looks very similar but not the same. You can see this was a bench grinder originally but changed into a polishing machine. You can see the holes for where the grinding wheel guards attach to the body of the grinder and the short length of the spindle when the polishing wheel arbors are removed. The spindle also has shoulders on each side to act as a stop for the grinding wheels. Also the ends of the spindle have threads for the nuts to hold the grinding wheels in place. A specifically made polishing machine will have long spindles without needing the arbors to make them longer.
I like these older machines since they made them 'tougher' in those days. 😀
Thank you so much for sharing!
Great Job Sir. I love everything you do, but I really liked this one.... Good as new, maybe better....
I love the CA glue and the paper medium trick. And in case your viewers think that is "bs" or something, it is not. That works. Now, you can use thin cloth, paper towel, whatever you have... think of it like a fiberglassing concept... You have the cloth, you have the resin, and together it dries hard & it works....
I did something similar with coarse fabric and some epoxy.. my technique was rough but it worked too. They don't make fiberglass composites just for fun....
Thank you so much for the trips, I'm glad you like this video!
I look at CA and my fingers are glued together. Thankfully I have the industrial acetone around. It works a hell of a lot better and quicker than Nail Polish remover. Just got to put some lotion on afterwards.
Very nice restore! Glad you finished it with near original color.
Very good and interesting to see the inside workings!
Thank you very much!
Another great job. It is a pleasure to watch you work so I have decided to subscribe. Thank you for what you do.
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
Thanks, you too!
Great restoration mate!! Awesome work!
Glad you enjoyed it
Wow the sound of the Machine after restore is so great
I hope to see the next conversion project from you ❤️❤️
Coming soon!
yes, so satisfying how it went from grinding noise to calm and smooth
Muito bom! 👍 gratidão GearShow!
Thank you!
Great job, thank you brother. You are so talented
Thank you too
Excellent restoration!
Many thanks!
Beautiful restoration!!!
Beautiful job as always done
Thank you so much 😊
Belle resto ,du bon travail A+ 🤚🏻
Thank you!
You are principled and talented
Thank you!
Nice job. Looks great!
Thank you! Cheers!
Very professional work, Thanks my friend, Big like ♥️♥️♥️♥️
Thank you!
Wow great restoration I like it
Nice restoration , colleague. Keep going to recording videos and keep growing your channel . Perfect content and all . Support 👍🔥💪
Grettings from Poland. Land of Polish :)
Thank you!
Very nice. Now you need new buffing wheels. Thumbs Up!
Oh yes!
i tought you will 3d a new one for the broken switch holder but your really a legendary instead of printing you use a FACEMASK to add some support to the glue nice idea plus it proves that facemask is not only use to protect people but also to put broken things together😅
Wow my first time watching something as first 😄 very nice restoration
Awesome! Thank you!
Niceeeee! Fan from Brazil!
Отличная работа! 🙂
Благодарю вас!
@@gear_show ты что дебил на вилку от розетки глянь придурок
Нравится смотреть ваши видео. Как всегда все класс
Thank you!
Комментарий в поддержку канала и ролика, а также труда мастера.
very nice👍👍
Thanks for the visit
Nice fix.😊
Thanks 👍
250V 20Amps ?? Impressive!
The internal switch is for a "run" winding. Once the motor is running at 1200rpm or higher the switch will open and the run winding will turn off. The main winding is powering the motor. The run winding just starts the motor in the correct rotation direction. That is why it does not havea capacitor.
This way will be efficiency than using capacitor?
@@gear_show This way the motor can only start in one direction. It cannot run backwards.
@@gear_show it's just a different method. A capacitor needs to be turn off with a centrifugal switch as well
@@gear_show Probably had issues starting because of the worn out bearings having increased friction.
Good job mister
Thank you!
Wow amazing 🤩
Thanks 🤗
Good job
thank you!
It is called "centrifugal switch'', it helps the motor to start, and then disengages when the motor reaches its full speed.
Oh, I see, thank you for sharing!
Good restore, i think you should've changed the polishing wheels to new ones though
Muito bom !
Amazing bro
Perfect job..
Thank you!
CA and baking soda also works great!!
Great tip! thank you!
you can upgrade the main wire with 3 line cable and connect the earth cable with the main metallic chassis, drill a hole and tap it if needed to use a screw. Connect a start up capacitor for better stability at starting
Finally a good use for a mask 😷
i never knew you could use facemasks in such a way!
Thanks for the tip
Happy to help!
It's hard to wait for your video, please upload video bit faster.. Big fan
I will try my best
Super!
Bravo
Could we get a link to that bearing puller you used?
beatiuful
Nice
Waiting for part 2 conversion to Li-ION
It shouldn't be a cordless tool
hi bro.you are the master.What are the names and types of colors respectively?
Wow excellent work sir. Sir you using oil what's type please tell.
Regular olive oil
@@robinsanders8895 thank you so much sir.
That looks terrifying
20:04 Sounds like ED-209 from RoboCop : ) "Please put down your weapon. You have twenty seconds to comply."
Yes, it was :D
*LIKEEEE 💯💥🛠️*
Thank you!
Good ii boss 👍👍😊😊😍😍
Thanks 🤗
Damnit you showed super glue and now my fingers are glued together. Every time I look at it that is what happens why I keep acetone around and not the girly nail polish stuff the industrial stuff. It works quicker to unstick my fingers.
kênh này của viêt nam thì phải, nền sân gạch này giống ở việt nam
what is the liquid you used at 9:47
👍👍
Thank you!
12:23 пищевая сода и супер клей. Зачем так заморачиваться.
Хорошо, спасибо за советы!
Sir please per day video upload
Thank you so much!
You should have renewed the electrical wiring, to.
Lavoro eseguito molto bene. Non vorrei sbagliare ma non ho visto il conduttore di terra. Se così fosse non e' a norma di legge.
👍💯
Thank you!
kênh ở vn hả bạn...
13:30 - the switch with crack.
it is metal case!! you need a protection wire!
👍👍👍👍👍👍👍👍👍👍👍👍
The way you did open motor housing was to rough, could be done in another way. All remaining was great
Thank you!
@@gear_show You are wellcome
This has already happened, a repeat of the video!
Ant👍👍👍
Good
Thanks
Shanu pandey
okay
Why u won't try with capacity?
This tool doesn't need a capacitor.
Cleaning electrical contacts with abrasive is a bad idea. Most important is the top - layer . Now contact can be "welded" in any moment.
Also sometimes those contact points are made out of cadmium or something toxic
So what should you do.
Ok, you may be right. What do you suggest to clean electrical contacts a better way ? It would be interesting to learn, thank you :)
Depends if the contact is just coated or is solid, something this old may be solid metal the whole way through. Also everythings toxic
@@pindrixsechon6311 with sharp knife
Ну я даже не знаю...
Without a capacitor even nj
I'm surprised, it doesn't need a capacitor.
12:04 Ant man spotted
Yes, he is..
@@gear_show haha ❤️ Ty for reply
awesome video love it
$
Ｐｒⓞм𝕠𝕤𝐌
hamdi and
maryan and
um I think the switch is cracked..
I glued it.
.
Thank you and good bye I unsubscribe now since the amount of commercials are so annoying...
Good ii boss 👍👍😊😊😍😍
Thanks 🤗