I just bought a Ruger RXM. Going to order an EHG and dremel some of the front off since its not serialized, and if I mess it up, oh well. Thanks for explaining it in detail.
Love the channel, love bass fishing and firearms, my current edc is a Glock 19 gen 5 and the CZ P07. Can’t wait for the bass spawn here in Pa. My PB largemouth here in Pa is 9.6lbs 2 spring ago.
Yes as soon as I figure out for sure if it's a win or fail . Haven't talked myself into shooting it yet only cycling it through and dry firing.. 😂 It may not cycle properly but it should hold together.. it's at the edge of having enough rear travel to cycle the next round reliably... It only cycles a round if you sling shot the slide not by dropping the slide release
You could video I actually learned quite a bit. I did wanna recommend for The RECOIL BUFFER from STRIKE IND. has 2, one harder than other in case one causes issues….
There is a tool in existence that is made for dremel that was created to the exact gen5 dimensions for “upgrading” a glock gen3 to accept gen4-5 slides. Takes the guess work out and the potential of damage to the frame or taking too much material out from the channel and not having enough material left compromising safety.
im trying to do this with a glock 17 gen 5 slide and barrel on a gen 3, 17 frame, is this possible by milling the front? will i have to change the locking block too?
I’m guessing that swapping locking block from gen3 to 5 is out of the question? If that could be done (reasonably) then maybe with the dust cover mods the bigger recoil assembly’s would fit
You can upload a video on how to on all these things and post on Odysee. no stupid rules like youtube when it comes to 2A stuff. I would definitely sub for that action.
@@shadaytree217 yeah I've been debating on switching to another platform... Keep hearing about Rumble also... Haven't looked into anything else... I used to love UA-cam for do it yourself info but way to in my business now... Is Odysee like Rumble? Which is better or growing faster?
I just bought a Ruger RXM. Going to order an EHG and dremel some of the front off since its not serialized, and if I mess it up, oh well. Thanks for explaining it in detail.
Love the channel, love bass fishing and firearms, my current edc is a Glock 19 gen 5 and the CZ P07. Can’t wait for the bass spawn here in Pa. My PB largemouth here in Pa is 9.6lbs 2 spring ago.
What did you do about the slide release? It will not engage
May you please do a dedicated video on comp’d 26 slide hybrid build !! 🙏🏽
Yes as soon as I figure out for sure if it's a win or fail . Haven't talked myself into shooting it yet only cycling it through and dry firing.. 😂
It may not cycle properly but it should hold together.. it's at the edge of having enough rear travel to cycle the next round reliably... It only cycles a round if you sling shot the slide not by dropping the slide release
If it works I’m definitely using that blueprint ! Thanks for the reply 🫡
I have a 19x and don’t like the full size frame and I bought a cf nylon gen 3 frame, can that work together?
@@JasonCabrera no it wouldn't be a drink that there's need to be some modification done
You could video I actually learned quite a bit. I did wanna recommend for The RECOIL BUFFER from STRIKE IND. has 2, one harder than other in case one causes issues….
There is a tool in existence that is made for dremel that was created to the exact gen5 dimensions for “upgrading” a glock gen3 to accept gen4-5 slides. Takes the guess work out and the potential of damage to the frame or taking too much material out from the channel and not having enough material left compromising safety.
do you know where to purchase the tool for the dremel
im trying to do this with a glock 17 gen 5 slide and barrel on a gen 3, 17 frame, is this possible by milling the front? will i have to change the locking block too?
@@blek4922 not sure about using the Glock frame.. the PSA frames are pretty easy
I’m guessing that swapping locking block from gen3 to 5 is out of the question? If that could be done (reasonably) then maybe with the dust cover mods the bigger recoil assembly’s would fit
Are barrels interchangeable on all Glock 19’s
@@JasonCabrera yes as far as I know they should be
@ thank you I’m going to get a gen 3 barrel for my gen 5
Do you know if a Gen 5 MOS G23 slide will fit on a gen 3 g23 frame? With all OEM parts?
I haven't tried it but it should be the same process I would think
Can I put a Glock 17 GEN three slide on a PSA dagger full frame?
Yes gen 3 is the same
Do you think this is possible on a Zev Oz9 ?
@@datdea not sure never had one but I would think it's definitely possible
Do gen 3 barrels work in gen 5 slides?
yes
You can upload a video on how to on all these things and post on Odysee. no stupid rules like youtube when it comes to 2A stuff. I would definitely sub for that action.
@@shadaytree217 yeah I've been debating on switching to another platform... Keep hearing about Rumble also... Haven't looked into anything else... I used to love UA-cam for do it yourself info but way to in my business now...
Is Odysee like Rumble? Which is better or growing faster?
Hey I have s gen 5 Glock 17 ZP upper. Which frame other than gen 5 frame would you recommend to pair with my upper ?
You’re Glocks are they the after market pistol or is the real Glocks
PSA Dagger lowers with aftermarket slides other than the 19x it's an actual Glock slide