What model stove is this . my metal part doesn't stick out that far . why? I have model agr5735qds I can send you pic of my hinges . and the silver metal part pops out towards door when I'm trying to put it in
Make sure that it's the correct door hinge for your model. I can double check, if you provide your model number. You can use this tool on our website to help you find the model number: www.appliancepartspros.com/modelnumber_locator.aspx If it is the correct part for your model, watch back through the video and ensure all the steps were followed and that the repair was completed correctly. If these still don't correct the issue, give us a call and we'll help you figure it out. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
This is the part I bought : www.appliancepartspros.com/whirlpool-hinge-act-door-wpw10299224-ap6019072.html My stove is a model WFE520C0AS. I did watch the video again to make sure nothing was done improperly. Thanks for the help!
I double checked, and that is the correct hinge for your oven door. There is a different hinge for the other side, however. If you replaced both hinges, this is the hinge for the other side www.appliancepartspros.com/whirlpool-hinge-pas-door-wpw10299227-ap6019075.html . There's a kit with both hinges for your door here www.appliancepartspros.com/whirlpool-hinge-door-w10347464-ap4929343.html Here is the parts diagram for your washer that shows the placement of both hinges www.appliancepartspros.com/door-parts-for-whirlpool-wfe520c0as0.html If you installed one of each of the correct hinges in the correct spots, it shouldn't be closing on you. If you ordered with us, give us a call and we'll take care of it. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Thanks. I had a feeling that may be the issue once i got into it, but the part description and the video don't mention a different one for the other side. It just said you should do both if you do one. Thanks so much for the help! I have a new one on the way and I guess I'll have a spare now for the spring side! :)
No problem! This video is actually for a different hinge altogether, so while it may help serve as an example to help with the installation, it won't be an exact match for your oven. You can check out the parts diagram for your model to make sure you've got the right hinge on the right side of the door www.appliancepartspros.com/door-parts-for-whirlpool-wfe520c0as0.html Also, if you'd like to return the extra spring hinge that you no longer need, we have a 365 day return policy, so we can do that for you. If you have any problems, give us a call!
I'm sorry, but I don't understand your question. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.
The instructions were great showed me how to do the job and was spot on 6:28
What model stove is this . my metal part doesn't stick out that far . why?
I have model agr5735qds
I can send you pic of my hinges . and the silver metal part pops out towards door when I'm trying to put it in
After I made this repair, my door the door won't stay open anymore. The springs almost seem too powerful. Any ideas?
Make sure that it's the correct door hinge for your model. I can double check, if you provide your model number. You can use this tool on our website to help you find the model number: www.appliancepartspros.com/modelnumber_locator.aspx If it is the correct part for your model, watch back through the video and ensure all the steps were followed and that the repair was completed correctly. If these still don't correct the issue, give us a call and we'll help you figure it out. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
This is the part I bought :
www.appliancepartspros.com/whirlpool-hinge-act-door-wpw10299224-ap6019072.html
My stove is a model WFE520C0AS.
I did watch the video again to make sure nothing was done improperly. Thanks for the help!
I double checked, and that is the correct hinge for your oven door. There is a different hinge for the other side, however. If you replaced both hinges, this is the hinge for the other side www.appliancepartspros.com/whirlpool-hinge-pas-door-wpw10299227-ap6019075.html . There's a kit with both hinges for your door here www.appliancepartspros.com/whirlpool-hinge-door-w10347464-ap4929343.html Here is the parts diagram for your washer that shows the placement of both hinges www.appliancepartspros.com/door-parts-for-whirlpool-wfe520c0as0.html
If you installed one of each of the correct hinges in the correct spots, it shouldn't be closing on you. If you ordered with us, give us a call and we'll take care of it. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Thanks. I had a feeling that may be the issue once i got into it, but the part description and the video don't mention a different one for the other side. It just said you should do both if you do one. Thanks so much for the help! I have a new one on the way and I guess I'll have a spare now for the spring side! :)
No problem! This video is actually for a different hinge altogether, so while it may help serve as an example to help with the installation, it won't be an exact match for your oven. You can check out the parts diagram for your model to make sure you've got the right hinge on the right side of the door www.appliancepartspros.com/door-parts-for-whirlpool-wfe520c0as0.html Also, if you'd like to return the extra spring hinge that you no longer need, we have a 365 day return policy, so we can do that for you. If you have any problems, give us a call!
Bbkjj2006,whirlpool,replacing,hinges
.putting,the,door,back,onwhirell,pool,stove,
I'm sorry, but I don't understand your question. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.
We are not worthy of this man...