⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Great videos guys! I've been watching for many years now. However. You say at the beginning of the video that a lot about the different E9X 3Series cars is the same. But this particular item is very much not the same between the different 3 Series E9X cars. If you have the turbo'd N54 or N55 engine then getting to these Sensors is very intimidating to do on our own. I will be replacing all 4 sensors in a week and I was hoping to get some insight into this but this model car has nothing in the way beside the manifold like a twin turbo'd car would so it's really not much use to me. Thank you for the videos and help over the years though as you have been a help in other areas for sure! All blessings to you and yours!
Thank you for the video!! I just tried replacing my sensors but for some reason my car is now stuck in lip mode and showing error P1056. Would you know why this would be happening?
New to your channel just bought a 2007 328xi with 90,000 miles. It seems to run good plenty of power what is your honest opinion on the car and what kind of problems should I keep an eye for.
I cleaned out my secondary air pump port and it was bad I imagine all the fluid and gunk that was in there corroded my sensor up I get many misfire now I checked live data and the voltage for that sensor does not budge from 0.01v and other do fluctuate when on I imagine this is the root to my evil doesn’t give codes only says misfires in all cylinders I also replaced bad ccv valve and cleaned manifold out from oil getting into I cleaned and took apart and tested disavalves only concerns is when I unplugged throttle body connector it seperated I only get bad misfire when I go beyond 4k rpm
People that own these vehicles can afford to take them to the shop. I need an O2 sensor change video for a 2013 X1 E84. I don't have a job anymore and cannot afford 3k every year in repair costs.
Watch youtube videos buy tools do the job yourself bmws are very easy to fix i fix mines off of youtube never been to mechanic yet and had the car for three years now.
@@djearthquake3409 thanks for that 3 years late. If you read my comment you can see that I was in search of a video as you suggest because this video does not cover my BMW and I cannot find a video that does. I sold my BMW for a more reliable and less maintenance intensive vehicle. I no longer have to worry about major repairs every year like my previous BMWs. Thanks!
Your sensor is angled very differently to mine. Yours is facing upwards almost, making it very easy to use the tool on it, mine is angled to the side much more, and so it's very hard to access. What car do you have? I have an E92, and I'm not sure this will be possible from the top at all, maybe, with a UJ on my ratchet.
hello, I changed the oxygen sensor that has 8 cables bmw e92 engine n43 2008 .but do i have to use program ISTA to delete the wrong code or can i use a normal diagnostic for delete
I have e90 2006 320i benzine.. it show me o2 bank 1 and bank 2 ( sensor 2 ) both sensors after catalyst with bad circuit slow responds. The bank 1 sensor 2 is working good when i see the real time volt graph. But bank 2 sensor 2 is still stuck at 0V so there is no electricity at all. The sensor it self is new and working perfectly. Any one can help me with this ??
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thank you very much this is what I have been looking for for all along ❤
Can it be cleaned instead of replaced?
thank you for this presentation it was very helpful.
God damn he has hammered that thumb nail to bits 🤣😂🤣🤣
Great videos guys! I've been watching for many years now. However. You say at the beginning of the video that a lot about the different E9X 3Series cars is the same. But this particular item is very much not the same between the different 3 Series E9X cars. If you have the turbo'd N54 or N55 engine then getting to these Sensors is very intimidating to do on our own. I will be replacing all 4 sensors in a week and I was hoping to get some insight into this but this model car has nothing in the way beside the manifold like a twin turbo'd car would so it's really not much use to me. Thank you for the videos and help over the years though as you have been a help in other areas for sure! All blessings to you and yours!
How do you do it on a car with n54
You guys are very good,
Thankyou for all your videos
I have to change the sensor 1 bank 1 on my BMW 2008 328i coupe and I wonder if this is the same process to do it. Thank you
@@LEGIOXIIIG guys it says e92
Great video very detailed with explanations
Hi... What is the mm of the cable ? I see more different like. 1500mm 90mm do you now and can tell me what exacly
I have to pay attention a bit more but , do I have to necessarily pull the cable around the engine ?
Will this Oxygen Sensor fit 2012 BMW N55 335i?
hey man ..do i need to activate this sensor after replaced or just install it ?
Nice and detailed. Thanks
i have a p0175 check engine light on. will changing the o2 senor fix the light?
No
Thank you for the video!! I just tried replacing my sensors but for some reason my car is now stuck in lip mode and showing error P1056. Would you know why this would be happening?
New to your channel just bought a 2007 328xi with 90,000 miles. It seems to run good plenty of power what is your honest opinion on the car and what kind of problems should I keep an eye for.
Injectors. These cars like to misfire
You guys are the best 💯💯💯🎯✨✨✨
I cleaned out my secondary air pump port and it was bad I imagine all the fluid and gunk that was in there corroded my sensor up I get many misfire now I checked live data and the voltage for that sensor does not budge from 0.01v and other do fluctuate when on I imagine this is the root to my evil doesn’t give codes only says misfires in all cylinders I also replaced bad ccv valve and cleaned manifold out from oil getting into I cleaned and took apart and tested disavalves only concerns is when I unplugged throttle body connector it seperated I only get bad misfire when I go beyond 4k rpm
GODDAMMIT BMW engineers GodDammit BMW brand
Nice video and Good job, it was very interesting. Thank you ////////////////////
Is this the same for bmw e90 320i 05? N46B20B Engine
People that own these vehicles can afford to take them to the shop. I need an O2 sensor change video for a 2013 X1 E84. I don't have a job anymore and cannot afford 3k every year in repair costs.
Watch youtube videos buy tools do the job yourself bmws are very easy to fix i fix mines off of youtube never been to mechanic yet and had the car for three years now.
@@djearthquake3409 thanks for that 3 years late. If you read my comment you can see that I was in search of a video as you suggest because this video does not cover my BMW and I cannot find a video that does. I sold my BMW for a more reliable and less maintenance intensive vehicle. I no longer have to worry about major repairs every year like my previous BMWs. Thanks!
Hi guys, great detailed vid, but could you let me no is this is a pre cat sensor or after cat? That would be really helpful thanks.
Pre cat
How do I know the type is oxygen sensor I’m supposed to buy? Thanks 2009 BMW 328i
Hi
Is this the O2-sensor-B1 upstream?
thank YOU =10 GOD bless YOU
This O2 sensor will fit the code P1128?
Hi I read your comment from a cls550 motor mounts install I need your help please tell how did you remove the anchors to the swaybars please help me
2009 E92 M3 uses the same sensor??
Will it work for a 128i
so my 320i does it have 4 lambdas or 2? i am confused ,looking to get a new cat but ut seems it has only holes for 2 lambdas ?????
What are sensor numbers for bank 1 and 2 and where to buy? Thanks
Your sensor is angled very differently to mine. Yours is facing upwards almost, making it very easy to use the tool on it, mine is angled to the side much more, and so it's very hard to access.
What car do you have? I have an E92, and I'm not sure this will be possible from the top at all, maybe, with a UJ on my ratchet.
I have the same problem, how did you do finally ?
Where is the bank 2 sensor located?
are both upstream o2 sensors for cylinder 1-3 and 4-6 bmw x3 2006 3.0 the same sensor ?
Have 2c7f and 2c6c oxygen sensor codes
Are they gonna cause any problems to the car? E90
E93 is totally different the lamda sonds are more difficult To reach because they are almost at the bottom
well done good job
Subbed! Thank you!
What's the part number for that 02sensor
After changing my bank 2 oxygen sensor my 07 e92 n52 has a misfire and bad start. I need help car was fine until i change the sensor
hory lyan they might be backwards flip the ones on top of the engine
hello, I changed the oxygen sensor that has 8 cables bmw e92 engine n43 2008 .but do i have to use program ISTA to delete the wrong code or can i use a normal diagnostic for delete
They say you need to show modul to the car at you change but is just whit ISTA ?
I see you have a Oklahoma hoodie on. I live in Oklahoma how much would you charge to replace my oxygen sensor for 2007 bmw 530i?
@@matshansen4967 is it difficult?
Do i have to disconnect battery?
I have e90 2006 320i benzine.. it show me o2 bank 1 and bank 2 ( sensor 2 ) both sensors after catalyst with bad circuit slow responds. The bank 1 sensor 2 is working good when i see the real time volt graph. But bank 2 sensor 2 is still stuck at 0V so there is no electricity at all. The sensor it self is new and working perfectly. Any one can help me with this ??
Fuse
Hello, is this for code p2a00?
TKY
How many o2 sensors does an E90 have ?
6 cylinder should have 4
This is different from e93 N54 335i
That’s what I have. How did you do it
My oxygen sensor bank 1 is smoking a little bit is it normal ? 😅
It’s time to replace it before it make your cats go out.
What a fuckin' nightmare just to get a sensor wire out! I'll stick w/ Mercedes thank u very much!
cant even understand this accent. 1/10