Installing T4 Pro Honeywell Thermostat

Поділитися
Вставка
  • Опубліковано 17 лют 2021
  • New Tstat install on 4x4 box.
    THERMOSTATS + CO DETECTORS
    T4 Pro Thermostat: amzn.to/3k0RgIC
    NEST Thermostat - amzn.to/2Szw28y
    NEST Carbon Monoxide + Smoke Alarm - amzn.to/37vdgmX
    BURNER PARTS
    Blower Motor: amzn.to/2UKvvQp
    Burner Coupling: amzn.to/2UN4agh
    Burner FUEL PUMP Suntec Fuel Pump: amzn.to/2Lj6ozx
    Burner FUEL PUMP Beckett Cleancut Fuel Pump: amzn.to/2BjieFo
    Beckett AFG Electrodes + Transformer Kit: amzn.to/2S4ybGD
    Burner Coupling: amzn.to/2CgoIXl
    Beckett AFG Electrodes: amzn.to/3oZBqyM
    Z gauge: amzn.to/36YxGaD
    Electrode setting tool : AFG Burners with - F Heads: amzn.to/36Ko5UK
    Universal Electrode Setting Tool: amzn.to/2YTpVy5
    High Temp RTV: amzn.to/3oVLTeH
    1/2" Rope Gasket: amzn.to/3aErSnJ
    3/8" Rope Gasket: amzn.to/2YNgccM
    KO WOOL High TEMP Strips Blanket, 2200F 1" x 1/2" x 300": amzn.to/3jq6J4s
    Loctite Anti Seize: amzn.to/2Bm1f5i
    Pipe Dope to seal fuel oil lines: amzn.to/2QxZEDL
    KO WOOL HIGH TEMP Blanket: amzn.to/2S4N37M
    FUEL FILTERS:
    Fuel Pump Strainer: amzn.to/2QwkxiI
    Wool Filter: 1A-30 : amzn.to/2EwFzYg
    4 Pack Fuel FILTERS: amzn.to/2UNWfPR
    FUEL LINE CHECK VALVE
    Threaded Fuel line check valve: amzn.to/2Exy9Uy
    Flared fuel line check valve: amzn.to/2EvMyk5
    TIGERLOOP (removes air from fuel system): amzn.to/2NKtaWo
    ZONE VALVES
    Honeywell Zone Valve Repair Kit: amzn.to/2LlDYVA
    Honeywell Zone Valve: amzn.to/2Lk1ylP
    BOILER SAFETY
    Boiler Safety 3/4" NPT MALE x FEMALE: amzn.to/2UOJPaz
    Boiler Safety 3/4" NPT FEMALE: amzn.to/2QUF2oF
    HVAC TOOLS
    11 in 1 Screwdriver: amzn.to/2BnAvl3
    Pump Rotation Tester: amzn.to/2UNWA55
    Milwaukee Headlamp: amzn.to/2LjmiKs
    5 Gal Shop Vac: amzn.to/2Lj6JlN
    5 Gal Soot Vacuum Bags: amzn.to/2ExyBlI
    Small Wire Brush: amzn.to/2BlS6K6
    Milwaukee 2462-20 M12 1/4 Hex Impact Driver: amzn.to/2S4Pg3p
    Greenlee PVC Cutter: amzn.to/2LqSfkd
    Boiler Brush: amzn.to/2UOBdAr
    Basic - Caulking Gun: amzn.to/2QS0Hhv
    Soot Saw: amzn.to/2Bxhi0r
    MORE - HVAC TOOLS: amzn.to/2wyaDEf
    ((( Post your questions in the comments and remember to subscribe! )))
    "WARNING" - Do not attempt to work on or disassemble any part of your HVAC System if you're not a Technician. You assume any and all responsibility. Working on HVAC Systems can be VERY DANGEROUS and should only be performed by Highly Trained Technicians.
    Thank you for your watching our videos.
  • Розваги

КОМЕНТАРІ • 32

  • @j.4198
    @j.4198 2 роки тому

    What is the 2o5 mode for a Steam boiler Dunkirk 82 gas for this thermostat?

  • @AvelinoElias
    @AvelinoElias 2 роки тому

    I have a T3 and I want to connect the heating, which should I use the same ones that you used in this video or C and RC?

    • @furnacetech2581
      @furnacetech2581  2 роки тому +1

      R - power from heating transformer
      Rc - power from cooling transformer
      W - heat
      C - common
      Y - cooling
      R - fan
      I hope this helps

    • @williamladesic9057
      @williamladesic9057 Рік тому

      What if I don't have a common wire

  • @mariannsuha5168
    @mariannsuha5168 3 роки тому

    How do I set the a/c on auto mode so it's will turn on or off depending temperature? It's so freaking cold at my house right now ,and it just keeps going ever since they installed it yesterday? I have a feeling it's either I turn it off or leave it cuz I couldn't find the auto a/c program on it. Or am I just that stupid ?! It's so complicated 😫😪😩

    • @furnacetech2581
      @furnacetech2581  3 роки тому +2

      Not sure if this is your problem or not. If your system will not go from the cooling to the heating mode automatically then follow the steps below.
      You have to go into the installer setup function of the thermostat.
      1) press the menu button and + button at same time.
      2) it will say ISU in the screen. Now hit select button
      3) screen will show numbers like 120 and a number below it like “0”. Hit select button until the number on the screen says “220”
      Make sure the number below it says “1” if you have one stage if cooling.
      4) next hit select until the screen says “300” and change the number below it to “1”.
      Now you should be able to hit home button
      And click mode until the screen says “auto”
      Also, check the thermostat temp setting.
      I hope this helps

  • @Nakelp86
    @Nakelp86 3 роки тому +1

    Why is that this model has temperature sensor off at 3 to 4 degrees and this is a lot since usually setting the thermostat between low and high its mostly between 4 to 5 degrees.

    • @furnacetech2581
      @furnacetech2581  3 роки тому +1

      You can go into the set up feature and adjust for this.

  • @4Fox59
    @4Fox59 4 місяці тому

    What happened to the programming link?

  • @willrise3980
    @willrise3980 8 місяців тому +1

    hi, is this installation is for heater only

    • @furnacetech2581
      @furnacetech2581  8 місяців тому +1

      yes, if you would like to hook up cooling or a fan, you would need to connect the (Y) & (G) wires to the tstat as well. I was only needing heating when i created this video.

    • @willrise3980
      @willrise3980 8 місяців тому

      @@furnacetech2581 can u make a video on how to connect heater and air conditionin

  • @jamalmcgrath810
    @jamalmcgrath810 3 роки тому +1

    Can I install a Honeywell T-4 to my RV ?

  • @nickm308
    @nickm308 Рік тому

    I have a blue and black wire.. Not sure where they go

    • @furnacetech2581
      @furnacetech2581  Рік тому +1

      The best thing would be to trace it out on the other end to see how they are connected. This way you can be sure to hook them up correctly.

    • @nickm308
      @nickm308 Рік тому

      I ended up popping the furnace open and looked at the wires and aligned them to the letter.

  • @furnacetech2581
    @furnacetech2581  3 роки тому

    I will upload the T4 PRO Honeywell Thermostat programming video soon.
    Thanks for watching the video! Click the link to SUBSCRIBE: ua-cam.com/channels/-ZPTqzkJujjUouZZohAvDw.html

  • @taesung4909
    @taesung4909 3 роки тому +1

    Only with 2 wires, air conditioning will work??

    • @furnacetech2581
      @furnacetech2581  3 роки тому +1

      No, you will need a yellow wire as well. It will be hooked to the (y) terminal.

    • @mrvarand736
      @mrvarand736 2 роки тому

      NO HE IS TOTALLY WRONG , FIRST OF ALL THAT IS HEAT PUMP THERMOSTAT , NEEDS 5 WIRE , R. W.Y. C. G. O.OR B. TERMINALS

  • @ncooty
    @ncooty 5 місяців тому +1

    2 questions:
    1. Why not use the common wire?
    2. Why not mount the metal box cover to the box first, then the thermostat?

    • @furnacetech2581
      @furnacetech2581  5 місяців тому

      Thank you for watching and leaving your feedback!
      Most of our systems use only two wire setups. You can definitely use the common wire!
      I am sure there are many ways to mount a thermostat. This is just the way I did it for this project!

  • @conservativeamber1216
    @conservativeamber1216 2 роки тому

    T4 isn't WiFi Compatible but T6 is

  • @lorrod932
    @lorrod932 2 роки тому

    can I change the default password

  • @orthelajeremy1107
    @orthelajeremy1107 2 роки тому

    I want to unlock

  • @ashatola
    @ashatola 2 роки тому +1

    Red and white?? What kind of thermostat ever has only red and white? This is useless for actually wiring and you don't need a video for mounting the thing on the wall.

    • @furnacetech2581
      @furnacetech2581  2 роки тому +2

      Every part of the country does not use Air Conditioning. We have mostly heating systems here in Alaska where I am located! Which is why this thermostat is only using two wires. Maybe this is a waste of time to reply but I do appreciate you taking time to leave your feedback.

    • @amandanascimento7396
      @amandanascimento7396 2 роки тому +1

      My only has red and white. Really helpful this video!!!

    • @christianconnor3311
      @christianconnor3311 Рік тому

      It was all relevant. Thanks for the information to all.