Hello, what do you call the small part that you attach to the indicator to successfully attach it to the bike? because I'm looking on the internet but I can't find it
The OE indicator lamps on the 24+ model do in fact use LEDs as the light source. In my experience of working on this model the replacement of the OE lamps with aftermarket LED type still makes the signaling system act up, like a much faster than stock flash rate. This is especially prevalent when you replace both front and rear with aftermarket LED options. So we recommend replacing the OE relay with one of ours. You can try it without the relay replacement first to see how it goes for you.
Any chance you guys could re-upload the video where you fully remove the fairings? The workaround is nice and all, but I'd really love to see the whole thing done end-to-end, it'd be very helpful!
@@kawarider636 yes but you would need our new signal adapters. Email our Support Team and they should be able to help you out. Support@tstindustries.com
i bought this turn signal kit with daylight running, i saw you have orange/black harness converters connect to bike harness. does it come with the kit? i havent install mine yet, but i dont have converters.
It is best to install with the bracket. We have the lights designed to use three mounting locations to imobilize the lamps against fairings. Using only two of the locations does not fully imobilize the assembly. I recommend getting in touch with our customer service team to get this resolved. -BR
Well, I can't promise anything. I am just messing around with some shapes that I heve been developing but have not gotten to a stage where they will be manufacturable yet.
I put the turn signals on backwards with the left on the right and right on the left…. They still work perfect but the light pattern goes in instead of out. My bike is 1 of 1 now…. Dang it.
@@astrome4154 sorry to hear that but at least you’re more comfortable wrenching on your bike now! Our signals do have a left and right identifier on the back of the housings.
@@triicky0420 do you have our LED Flasher Relay installed? Did you order the sequential variant or the standard one? Are you getting any signal function at all? Have you checked your fuses? Answers to these questions can help us help you. You can also email our Support Team for further assistance. Support@tstindustries.com
@@TSTindustriesI ordered the hyperpack bundle, I got the signals working and wired it just like the video even on .50x speed and they don’t turn on when the bike turns on
one of the most beautiful bikes in the market. i love it.
Couldn't agree more!
In that color scheme, its the best looking 600 ninja ever....
Me watching this at 3'o clock with 700 bucks in account😂😂😂🤣
...about to be less money in that account ;)
😂😂😂😂😂 story of my life
That definitely looks sweet in action.
Please help make a video on how to put the ZX-10R rearview mirror on the ZX-6R. Thank you.
Hello, what do you call the small part that you attach to the indicator to successfully attach it to the bike? because I'm looking on the internet but I can't find it
It comes with the signal set. It is not sold separately so you won't find it by any search.
-BR
I may have missed it, given that the 24 zx6r comes with LED indicators etc does that mean the relay wasn't/isn't needed?
The OE indicator lamps on the 24+ model do in fact use LEDs as the light source. In my experience of working on this model the replacement of the OE lamps with aftermarket LED type still makes the signaling system act up, like a much faster than stock flash rate. This is especially prevalent when you replace both front and rear with aftermarket LED options. So we recommend replacing the OE relay with one of ours. You can try it without the relay replacement first to see how it goes for you.
@TSTindustries fair doos, thanks very much for the info. ☺️
@@V8HiluxZX6R you're welcome
I have the 2024 zx6r crash protection I got from tst I was wondering when will tst develop frame slider an a zero gravity windscreen
Our product showcase video on the 2024 ZX-6R has some insight into those parts 😉You can watch it here:
ua-cam.com/video/Po9zsIIcQOw/v-deo.html
Any chance you guys could re-upload the video where you fully remove the fairings? The workaround is nice and all, but I'd really love to see the whole thing done end-to-end, it'd be very helpful!
I have this kit off my previous zx6r(22) would they fit on the new zx6r(24)??
@@kawarider636 yes but you would need our new signal adapters. Email our Support Team and they should be able to help you out. Support@tstindustries.com
i bought this turn signal kit with daylight running, i saw you have orange/black harness converters connect to bike harness. does it come with the kit? i havent install mine yet, but i dont have converters.
Is the white bracket necessary for the install bc I never got any with my kit
It is best to install with the bracket. We have the lights designed to use three mounting locations to imobilize the lamps against fairings. Using only two of the locations does not fully imobilize the assembly. I recommend getting in touch with our customer service team to get this resolved.
-BR
Will you guys ever do a Yamaha r7 tailight?
Hmmmm... May or may not have something in the works
@@TSTindustries oh yes my most anticipated mod
Well, I can't promise anything. I am just messing around with some shapes that I heve been developing but have not gotten to a stage where they will be manufacturable yet.
I’m having a problem to find the OEM relay to replace with yours, please help
I hope this helps! -TST
ua-cam.com/video/pJXGqLpbPPo/v-deo.htmlsi=R3KWLB78PG1XGppH
is this installation process only for the 24+? cause i be having issues installing on my 2023 zx6r..
For that model you’d want to use this video.
ua-cam.com/video/Pl9B6vXajoE/v-deo.htmlsi=cgnJkzbLPKAmiE4l
Really nice!
Glad you like the parts.
I just wish it could be regular white light for the running light. Maybe in the future 🦾
I put the turn signals on backwards with the left on the right and right on the left…. They still work perfect but the light pattern goes in instead of out. My bike is 1 of 1 now…. Dang it.
@@astrome4154 sorry to hear that but at least you’re more comfortable wrenching on your bike now! Our signals do have a left and right identifier on the back of the housings.
No clue how I did it to be honest but I’m leaving them like that, looks fine.
Wired it 3x don’t get running light or Sequential.. pretty irritating
@@triicky0420 do you have our LED Flasher Relay installed? Did you order the sequential variant or the standard one? Are you getting any signal function at all? Have you checked your fuses? Answers to these questions can help us help you. You can also email our Support Team for further assistance. Support@tstindustries.com
@@TSTindustriesI ordered the hyperpack bundle, I got the signals working and wired it just like the video even on .50x speed and they don’t turn on when the bike turns on
@@triicky0420 do you have the flasher relay installed yet?