Toyota U760E with code P2716
Вставка
- Опубліковано 6 вер 2024
- In this video, i have a 2010 Toyota Camry with code P2716, Pressure control solenoid D eletrical. This actually is the SLT solenoid which controls line pressure, On this model trans the TCM is bolted to the trans at the connector, so its not so easy to diagnose when intermitent. I go through the process of what i did to fix the car. Sorry for the late video, i was having trouble posting them
Another great video. Love the logic explained, & why you do certain things.
Thanks Cuba, hope all is well.
thanks mr gary , love your videos . always watch them
We have a 2006 Toyota Corolla code P 2716 Pressure Control Solenoid D Electrical. Couldn't get the code to remove even when cleared with a scanner. Turns out the car had a recall for a defective ECM and the woman never took it in to be fixed. The issue was a cracked ECM. Took it to Toyota yesterday and they replaced the ECM free. Issue resolved. Lesson learned call the VIN number into Toyota before replacing the solenoids to see if there any recalls out for the car before doing the work.
I have seen this code before, but wasn't sure with the 6 speed units if computer was the issue, couldn't find TSB either like i did with the 4 speed units.
Ho
00971563969716 WhatsApp number
Hello sir you send me your WhatsApp number I wait
I have to buy auto electrician
Thanks brother for your good information 🙂
Hello Gary .. i have a 2007 2.5l toyota camry gear is transmitting smooth but the code p2716 d electrical popped up i have tried to clear it using an obd 2 scanner but the check engine light keeps popping up.
What do i do?
I'ma do a u760e works till it gets hot after a few drive cycles it acts up no 4th 5th 6th a weak solenoid that can't handle the heat in the kitchen no more, I'm guessing. But car has a bad battery also I'm gna check continuity at harness could it be a valve hanging??
nice tip .! thanks for posting this trans repair videos .!
Thank you john
Pisfh
@@GaryFerraro
I’m not sure
@@tadiedzembe1023 ??
One question. What do you think about this transmission U760E, is it good? Do you know if they have quality issues or defects? I have read they have some issues with the torque converter. Thanks for your support.
They are really good transmissions. I came across with some having over 400,000 miles, provided a proper maintenance is performed.
Will a wrong size battery would affect to the point of this code coming out i have a 2008 toyota avalon an it has a smaller cheap battery brand it is brand new but its small can that make the code pop up?
I have a 4 cylinder 2007 Camry and it is pressure control solenoid c electrical 😩 and Isaí what to order do to lack of knowledge of the what solenoid i should be replacing 😭
I appreciate the excellent videos. On occasion, the dashboard electronics in my 2008 Lexus ES 350 restart multiple times while driving, occurring around six times in the last month. Upon checking the error codes, I found it to be P2716. Is there a way to diagnose whether the issue lies with the TCM or the electrical aspect of Pressure Control Solenoid D?
if you clear the code, does it come right back?
great video question Can I replace the SLT solenoid without removing the body valve? I have a sienna 2011 3.5L 6 speed and I have a code P2716
Did you figure this out? I have same code popped out, but shifts well on Lexus 2010 rx350.. should I just drop oil pan down and swap solenoid? Do I need to remove valve body?
@@richardsutrop8789did you end up fixing? How?
I GOT A U660E from an 09 lexus es 350. came in first due to a leak. Customer mistakenly drove with a leak from a pump seal and didnt move after. After rebuild and test driving (shifting gears has no issue upshifting or downshifting) the car was given back. 1 week later the car came back with a P0714 code pressure contol (D). further inspection noted the transmission had leaked again from the pump seal and bushing that were already replaced. After replacing pump bushing and seal for the second time it leaked again for the third time. As far as i can see the pump looks fine and no visible wear. Is there anything that im missingor not seeing?
Is the bushing worn on one side? are there dowel pins? what type of seals are you using?
I made a mistake. There is 2 pump bushings for 1.820 the other is 1.858" outside diameter for the u660e. The 1.858 is for late u660e and u760e.
Nathaniel Circo Glad you got it fixed
I have an 11 Camry with the 2.5 and the U760E. On my 2-3 shift at about quarter throttle the engine bogs down cause it's engaging the torque converter as soon as it shifts to 3rd. Then it shifts to 4th and disengages the converter and shifts normally. If I'm at half throttle it seems to shift normally. You ever seen this before or have any suggestions? No codes stored or lights on either.
First i would check the fluid level, no dipstick on this trans. What type of scanner do you have?
@@GaryFerraro
Fluid level was checked at the specified temperature, using an infrared thermometer on the pan. And unfortunately I work for a Ford dealership and and only have access to a Ford scan tool so for my Toyota I used a Mac handheld code reader.
@@littlebearish ok, do you know anyone with a snap-on scanner or autel? first thing i would with this is do a memory reset or shift adapt reset see if anything changes. I was able to fix a few of these by doing that.
@@GaryFerraro
I know a fella who owns his own garage and I believe he's using the Snap-On scanner. He may give me access to it if I ask nice and bring him a case of beer. Lol
I will definitely give that a try. Thanks so much for your replies, greatly appreciated. Hope you have yourself a great weekend.
@@littlebearish That should work, a customer did that for me and i let him use my scanner. LOL
Great video very helpful keep posting more content man
2MUNDZ Thanks for watching. Please subscribe
I have a 08 tundra p2716 toyota dealer is telling me to swap my 211+ plus transmission instead of fixing the solenoid problem. What should I do?
This code is usually a bad TCM
Hello Gary I have a 2007 Lexus IS250 I had my old transmission in it that would shift gears kind of slow when cold and as soon as it would get hot it wouldn’t shift into 4th at all then I changed transmission out and now it won’t even move in drive or reverse ? I’m getting p2716 code even if I clear it it comes back right away any thoughts ?
Mine does not shift into 4th. They Told me to replace linear solenoid valve. Did you fix yours and how? where to buy part?
I just discover some of your videos I found very useful you mention a u760 flares on 2-3 shift I have a 2011 that do that same thing only when cold I have not get into yet iam doing some research on the problem before I do the valve body and air test do you have any advice thanks
You could try setting shift adapts first, also make sure the trans is full of fluid
Thanks I will try
Hi Gary, thanks for the video. I have a 2013 Sienna with the U660E with the p2716 code, can you tell me if it's possible to replace the SLT solenoid without dropping the valve body? thank you in advance.
You have to drop the valvebody, if you clear the code, how fast does it come back? could also be your computer
thank you for the reply, it comes back on immediately, I leave the battery disconnected over night and light comes right back on when started. Dropping the valve body makes me a little nervous, any concerns or tips? A little back story...
A few weeks ago all of a sudden it threw a speed sensor code and the engine light and trac light came on. A couple weeks later it would not shift into reverse. It threw a few tcm codes, one being p2716 pressure control solenoid d electrical. I cracked open the drain plug on the transmission and the fluid looked terrible. I did a fluid replacement through the coolant lines and checked level. It took a few test drives and eventually, everything was shifting fine. After about 200 miles, I did another fluid change and changed the filter. Still have the 2716 code@@GaryFerraro
If you can Try to ohm the solenoid at the connector, if ohms ok then TCM is no good, 99% of the time the TCM is at fault with this code but i don't want you to go out and purchase a TCM until it's checked@@user-dd8ip3zz8j
OK, I will do that. Do you mean to ohm it at the TCM connector or drop the pan and ohm at the solenoid connection? I see that I can access the TCM by removing the battery and air clean inlet according to the manual.@@GaryFerraro
TCM is bolted to the trans?@@user-dd8ip3zz8j
great video. well elaborated . thanks
Thank you
How to change D solenoid sensor Venza20010
What code do you have?
Replace valve body don't work, replace computer don't work, replace transmission don't work, replace the car, easy work....
Would an overfilled transmission cause this? I have a slight whine for 2 seconds when going into neutral and park. Another video pointed out that the noise only occurs when the SL solenoid goes on
Shouldn't cause it, would you say it's more like a buzz than a whine
@@GaryFerraro i suppose I would call it a high pitch buzz, not like a bee but more like the sound of a dentist tool, and then after the couple of seconds I can hear something shutting itself off, similar to a door closing.
@@junglejuice23 Does the car ever stop moving when hot?
@@GaryFerraro I've never had any sort of unresponsiveness or late response at all
@@junglejuice23 ok, maybe a valve buzz, the valves are moving constantly in the bore and maybe bores are starting to wear out
I have this same code, same issue on a 2011 camry with a u660e. I wasn't able to find in the video but did you say how much it cost the client to have this fixed? Wondering ballpark price to have it fixed so I can set some cash aside for it.
you have the P2716 code? One thing to check is the battery and charging system, also make sure the battery terminals are tight
@@GaryFerraro Ok I'll do that. The code goes on and off. That would be nice if it's just the battery and not the SLT solenoid.
@@salthack The problem was actually the TCM, I have part 2 to this video
@@GaryFerraro Interesting. I watched it and that made sense. I know there's something along the lines of removing the TCM and testing the electrical resistance on the solenoid pins and ground. Would that rule out the solenoid vs the TCM?
@@salthack past experience with this code on other vehicles, i kinda knew when i saw the code, but to please the people i had to do it the way i did.
great videos Gary.. i have a 2009 corolla with this p2716 code and is shifting really hard.. scanner reads this pressure control solenoid..... don't know if you can pin point the location of this particular solenoid on this transmission.. U341E...it's hard to find someone in this area that does this kind of work.. everywhere i take the car they tell me i have to replace the transmission.. car has only 100k...saw a video of the same car with the same issue and the problem was the computer ECM/TCM.. guy replace the comp and said transmission was running fine after that.. nothing to do whit the solenoids... appreciate if you can shad some light on the issue
Is the code for Shift solenoid D? Did you replace the ECM?
@@GaryFerraro the code reads p2716 pressure control solenoid D electrical.... got a new PCM on the way ( new to me. it's used ).. txs for the reply Gary
@@GaryFerraro it also says code 2716 indicates the PCM detected a fault in the linear solenoid valve(SLT) circuit
@@armyofone2019 That is usually the problem, i think something happens to the driver inside the computer but it blames the solenoid. Did you get the part number off of your computer?
Call your local Toyota dealer. There's a recall out for the ECM that throws this code
justin bouy Are you talking about cars like the RAV4 where they extended the warranty
I had a 2005 corolla today and they didn't extend the warrenty they just put out a recall.
@@justinbouy3153 Thanks for the info, going to look into that
How do I get the valve body off? I took all the bolts off but the plug won't come down..
could be some crap there, push on the outside of it and see if it will move down
@@GaryFerraro thank you for getting back to me.. I pulled tcm off.. then was able to remove the plug.. which leads me to my next question.. do you have a part number for that plug only.. ive only been able to find it with the Solenoid harness and solenoids as a kit.. and even that kit is hard to come by in my area.. id have to order it but its over a week out.. need my car going by Monday..
@@pisto_run_cycling That is part of the internal harness correct
@@GaryFerraro yeah its bolted to the valve body.. and the small harness off the Solenoids connect to it.. and the tcm connects to it from outside the case..
Thanks for the video
Thanks im having an issue with uploading all day had to find the work around, i'll try to get the next one clearer, still playing with it
Please show the video repair U660E
please give me a manual for repair U660E. vip.chungro.DD@gmail.com
I also share with you their manuals)
I may have something i can send you. i just have to find it
Wow he really needs help probably has it broken down on bench with no idea LOL just kidding good luck Tarzan
Hi Gary , great video
I have a Toyota Camry 2.5 with 760e AT 2010
It suddenly started slipping
And all selenoids codes A B D G performance or stuck off
P0746
P0776
P2714
P2808
What's your opinion about What's wrong with it , dose it need a new transmission?
I checked the fluid amount and quality and it looks not that dirty( still red)
What happens if you clear the codes
@@GaryFerraro the problem continue and the codes come back after few days
@@TheIbrahim513 was anything done to the trans?
@@GaryFerraro no
Only parked the car for 3 days ,
Then it suddenly started slipping hard the day after
It slips hard in 4th( rbm reachs 5000)and 5th gear
And engage with nock , and also nocking from N to D and from N to R
I had an update. For you.. I found the part I asked you about yesterday at the junk yard.. and I took the internal harness with it.. put it all back together and car is running good.. but I have a light on for torque converter solenoid.. p2770.. would you be able to tell me which one is the torque converter solenoid.. also how bad is it to drive car with that code?.. again.. it is driving well.. im in a pretty crappy situation at the moment.. any help would be well appreciated
Did you ever get this figured out ?
@@Marvin1martian i can tell you this if you replace oil in a Toyota you have to reset driving parameters.. after all this issues with car . I continued to have check engine lights on for trans codes.. I dont remember the codes.. but eventually the trans started to over heat and failed.. replaced with good used.. reset driving parameters and its been good ever since..
@@Marvin1martian i did get a bit over a year of use out of car even with codes.. 80 miles a day 6 days a week
@@pisto_run_cycling I see. Appreciate the info. I’m dealing with codes after an engine swap. Doing a lot of studying and homework on the matter.
Thank you! 🙏
@@Marvin1martian my issue started after washing engine.. where the harness plugs into trans.. its a pass through connector thats bolted in place inside trans. But can have play and mine rubbed through.. and water got in and fried it.. prior to this though there was a trans code.. so maybe you had it before you swapped engine? Also.. If im not mistaken 2010 and 11 were known for trans issues.. good luck to you
My 2017 Camry 2.5 has this code at 33k miles.
Singledadadventures usually means a faulty TCM. How does the car work does it shift? Also make sure your battery connections are good. Had one with this code and found a bad a loose negative battery cable
Gary Ferraro The car shifts fine. No issues there. I’ll check my battery terminals. Thank you.
@@Iraqveteran-ke6qu OK, have you tried clearing the code and it came back?
Gary Ferraro cleared the code 2 weeks ago. A weak after it came back. Hoped in my car and the engine light turned off. Have yet to check if the code is still there.
Hello Gary, I drive a toyota camry 07. when i put the car in drive in the morning the car will not drive until after 10mins. revers works fine.the check engine light shows p2714 pressure control solenoid d performance or stuck off... what do i do?... great videos by the way
Ok, so the car will not move in drive until 10 minutes of it running? reverse is good? what is the engine size
@@GaryFerraro 2.4 L 4 cylinder
@@kolawoleolusola ok you have the U250 five speed trans, the code with performance or stuck off code is a mechanical problem, you may have something wrong with the forward clutch is the car does not move in drive right away, how does the fluid look?
@@GaryFerraro i changed the oil two months ago. before that i change it 9 months ago. the oil looks pink . thank you for your support
@@kolawoleolusola can you put the car in manual one? if you can does it pull off or same thing?
Hi I have problem with sienna2013 XLE d delay for 3 sec can you
Advice me
@@andriykosyaki5834 Reverse ok? How is the car cold in drive? does it have delay when cold?
@@GaryFerrarowhen i start car every morning it’s perfect no delay reverse no problem shifting no problem only when I from park to drive it’s delays and little noise
Were can i buy that part i have the same issue check engine with that code
So you need a TCM?
@@GaryFerraro you saying i need a new computer ? Or just replace the electrical d solenoid
@@GaryFerraro thanks for replying
@@naviosobefresh2866 What code do you have
@@GaryFerraro P2716
I sent you an email Gary about a transmission swap on a 2007 LEXUS ES350, thank you
Good shit my boi
I’m 19 I’m trying my best to understand but I’m fooking stupid that’s why I work in a factory job focus danny focus
Transmissions are not that easy to do
The gear 4 is misfayarin
That code is usually computer
this is nothing new, all toyotas do this even the new ones 2017, 2018, 2019 etc. The solenoids are meant to fail and the customer told they need a new tranny.
Just replace the solenoid, and add the same amount of fluid removed, and your golden ! I am truly disappointed in Toyota with the lies and misleading diagnosis procedure for this failure!!!!!!!
2716 is usually always a TCM, Only had it once when it was a solenoid, water was in the trans
@GaryFerraro The newer cars no longer have a tcm. Drop the pan, key on, solenoid buzz, touch with your finger, the bad one stops buzzing or just ohm them after applying a torch to them 30 seconds . Very very common toyota problem. Dealers stock these now for all Toyota U model trans. Same part number and solenoids.
@@user-ju8rr9rf1o are you talking the 8 speeds or 6 speeds
@GaryFerraro both, the solenoids fail after 5 years plus typically. I'm seeing this take out collision avoidance , abs, and telecommunications within the radar collision avoidance systems in the can bus, and it all leads back to these solenoids. They cause a multitude of can bus codes.
Нифига не понял