How To Install Car Audio Speaker / Speaker System / Door Speaker Install - 2007-2016 Honda Ridgeline
Вставка
- Опубліковано 7 січ 2024
- GT-Industries takes no responsibility for any damage or harm caused to you, your property,
items used or items worked on using the information provided in this video.
Use this info at your own risk.
In today's video we'll show you the basics to installing almost any car door speakers for the DIYers out there.
This video will cover some general instructions, not specifics to all vehicles.
We will specifically be covering the speakers on a 2007-2016 Honda Ridgeline
Affiliate Links Provided Below
wiring link - amzn.to/3S9nUuh
volt meter link - amzn.to/48mxhfZ OR amzn.to/47uJhdX
Wire Strippers - amzn.to/47uJhdX OR amzn.to/3RN3WEh
Box Cutter Red - amzn.to/48pJGj8
Box Cutter Blue - amzn.to/3tQ8v8I
Wire Cutters - amzn.to/3RSFNvW
Trim Removal Tool Set Blue - amzn.to/48mWMxB
Trim Removal Tool Set Black - amzn.to/3H9WLRx
Trim Removal Tool Set Red - amzn.to/3H94sYn
Pick Set - amzn.to/4aORkoF
Screwdriver set - amzn.to/3NX0cz0
1/4" Socket and Ratchet Set - amzn.to/3vmntDQ
Self Tapping Screw Set - amzn.to/48gGNRD
Door Speaker Adapters for 2006-2016 Ridgeline - amzn.to/4aRhMht
Door Speaker Harness Adapters For 2006-2016 Ridgeline - amzn.to/3SaIQRx
Rockford Fosgate Pair of speakers 6.5" - amzn.to/48OA5SR - Навчання та стиль
This is excellent. Great detail and very well filmed as well as well lit so that everything can be seen clearly.
How do you unhook the tweeters?
I'm tryna instal 10s. The wires have to run from the speakers to my amplifier instead of my headunit. So I'm running new wires
Any idea how to remove the rubber tubing that sheaths and protects the wires in the space between the door and the door frame(the closure area/doorjam near the hinges)?
Depends on the vehicle but normally what we do is follow the manufactures guidelines on how to remove the rubber from each end (where the connectors actually go in the door) and use a stiff welding wire to run the wires inside that rubber along the harness. Once the wire is all run, simply reinstall the rubber on the connectors. (Typically the rubber simply peals away from the connector it's covering and allows you to push some pins or un-do a bolt to get the connector out but again, that's different for each vehicle)
@GT-Industries gotcha thanks! I moved to the back doors and found like you said, tho stiff the rubber just peels back.