Looking to get some exclusive merch that you can only find in Japan? Use my code BIGRIGCREATES at the link below to get 1000ZenCoins! (that's equivalent to 1000 yen) tinyurl.com/5dwpcbpv
Man, I hope you didn't have to pay those professionals for a job they didn't do or at least got your money back. However you did an amazing job and your Gholdengo looks amazing!! Also....GIVE ME THAT GIMMIGHOUL!!! I NEED IT!
I realy love how they turned out! Ghimighoul and gholdengo are one of my favorite pokemon line from paldea and they turned out great! And of course the signiture magnets are here aswell so 10/10
As much flak that Scarlet and Violet got you gotta give the Pokemon Company credit they knocked out the new designs out of the park in this generation. Love me my little coin goblin.
Great job with that gilding, I'm actually surprised it was doable considering the small spaces that the figure has like under the hair For the elevctroplating failure I think an issue was that sanding is not enough, I don't think it being 3 pieces glued together was the issue, since in that caae you could've plated all 3 and then glue them at the end But to get a good result you have to make sure that your print is absolutely perfectly stupidly smooth and sealed, normally requires a couple layers of primer and resin thin resin coating, but hey.....at least ABS is easier to sand than PLA, becuase you will need to get to a couple 1000s level grit which means a couple of hours/days But nonetheless great project, yoy always keep finding new original ways to create each pokemon!
Yeah, gilding is absolutely a nightmare if you’re not using copper leaf. The gold leaf is so much more difficult not because of how thin it is, but because it’s softer. This makes tearing it really easy, where as with copper leaf, you can be a little less careful. If you’re hoping to get into gilding, use copper to start so you can get some practice that isn’t 70$. For initial application with copper, using your fingers to hold the leaf is fine, but DO NOT touch it with your hands once it’s been laid down. with gold leaf, NEVER use your fingers, as it sticks between the ridges in your fingers very easily, and it’s hard to wash off. In my personal experience, brushing in sweeping motions isn’t the best way to smooth it over. Instead, utilize a pair of plastic tweezers, and a toothpick to help maneuver the leaf. Once applied, gently poke at it with silicon clay tools. This allows you to apply force without risking a rip. Rather than using the brush for smoothing it, after you leave the leaf for 24 hours use the brush to remove excess leaf without tarnishing the surface. If you want to protect the layer, use a VERY thin coat of UV resin As for gilding glue brand, the brand Mona Lisa makes very reliable and easily usable glue. When applying to plastic, have a dedicated silicone tool to apply the glue, and this will allow you to gild tiny details much better. I also find that it’s most effective to leave the entire leaf on the model until it dries instead of trying to brush away excess while still not cured. Sincerely: someone who loves gilding their plastic models
Looks great! I wont lie I kinda wanted to see at home gold plating but I totally get why you went the route you did. I forgot this channel isn't millions of subscribers strong. IDK why its not though.
The lady who said they can’t just magically plate a model in a few seconds is lying out of her ass. I watched a guy electroplate Custodes models gold and in his video he said(and showed) that playing with gold literally only takes a few seconds once you have the tub set up.
This would be super easy, and has probably been done already, but I would really like to see a lotad trinket dish for jewelry. The lily pad part could come off like it’s a jar, and you could hang drop earrings off the rim of it.
Same as your last video i recognize where you were sitting when you got coffee from corner bakery. It scares me how much these two videos have shown of your location.
IDEA! YOU SHOULD MAKE A GIMMIGHOUL CHEST FORM WITHOUT COINS AND YOU CAN PUT YOUR CHANGE IN IT LIKE A PIGGY BANK!!! The more coins, the more the gimmighoul gets buried in coins!
Staryu Starmie aquarium skimmers and victreebel bug catcher and dragapult darts and board and snorlax/miltank/clodsire door stoppers and literally any crab Pokemon staplers and finally a torterra bonsai plant I could go on....I love you for this channel ❤❤❤❤❤
dude given wut u had to work with and and staying on budget and going through much trial and error, im just saying, it looks AWESOME. seriously id actually buy it great job as always
Looking to get some exclusive merch that you can only find in Japan?
Use my code BIGRIGCREATES at the link below to get 1000ZenCoins!
(that's equivalent to 1000 yen)
tinyurl.com/5dwpcbpv
noice build
Can u make a kyogre rc next? I’m begging you pls do it🙏
Can you make revavroom as an rc next?
It’s my bday on September 15th, can u plz make chandelure? Chandelure my favourite Pokémon
Can I buy this somewhere?
I love that Gimmighoul chest goblin an absurd amount.
Same
Primal groudon lava lamp when Rig
1:1 scale Primal Kyogre aquarium when?
Mega rayquaza drone when
I can't think of anything for the latis
@@ObviousNewt latios and latias 1:1 private jets when
@@ObviousNewt latios and latias private jet
YOU LIED TO ME ABOUT WHAT THE GIMMIGHOUL IN YOUR CAR WAS FOR IT'S BEEN IN MY CLOSET FOR A WEEK
omghaha
Lmfao
Lmao get pranked bro
NAHH😂you didn’t look at ur closet for a week?😅
oh no
Man you are far too kind plugging me like this bro! Really appreciate you for doing this. Totally didn't have to.
I mean no one else can fill out a whole video’s run-time of backing tracks.
I appreciate it! Now I can find the great music
We're going bankrupt with this one 🔥
I feel like the rough edges of the gold makes it feel more realistic.
The coin piggy bank makes waaay more sense as a gimmighoul than a pikachu. So dumb of Pokémon not to think of that
pretty sure they made the pikachu coin box like way before Gen 9 😭
@@SimplifriedMeowth would also make sense. How else would Payday be possible?
Along with the fact that its based on a lucky cat box.
Then Meowth should be the obvious choice
Man, I hope you didn't have to pay those professionals for a job they didn't do or at least got your money back. However you did an amazing job and your Gholdengo looks amazing!! Also....GIVE ME THAT GIMMIGHOUL!!! I NEED IT!
This is actually such an amazing project!! Fantastic job as always!! :))
You should make a spritzee or aromatisse, inscense burner or a humidifier
RIP ur bank account for real for real. And whoa what a great singer at 9:00 👀
It was a beautiful memorial for the fallen gholdengos while it lasted
Erm i need a whole cover
I realy love how they turned out! Ghimighoul and gholdengo are one of my favorite pokemon line from paldea and they turned out great! And of course the signiture magnets are here aswell so 10/10
Garbodor Trashcan when
wouldn't that be garbodor trashbags?
@@EmiyaHikari
It'd be more in line with Garbodor's design, but it would be a bit of a waste for it to be disposed of so quickly.
Trubish trash bags when
Dammmmm our golden surfer guy turned out incredible (Gholdengo)
As much flak that Scarlet and Violet got you gotta give the Pokemon Company credit they knocked out the new designs out of the park in this generation. Love me my little coin goblin.
Make a Blastoise water gun! (or Charizard flamethrower...)
bulbasaur pot
blastoise should fire from his head
That would be cool
It would be double barreled.
Make a shiny Shuckle alcohol fermenter next! Just like the one from the show!
Ho oh that makes a rainbow (water and light)
That sounds cool
Both the bank and your funky li'l gold leaf man came out great ❤
This turned out pretty well! Good job!
Hear me out, a charizard flamethrower, so when you push his belly he spits fire, along with that, a charmander that is also a lighter!
HELL YEAH!!!
Might also need a blastoise fire extinguisher though
Torkoal barbecue/grill when?
he made a torkoal humidifier
@@EmiyaHikaridid he
@@PeanutPlays_IsCool yes, in the exeguttor episode
Your channel is worth it's weight in gold 🥇
I’d love to see a Goodra stress toy
That gholdengo looks soooo good, you can definitely be proud. 😳🤩
GOOD STUFF RIGHT HERE
I always find your videos extremely educational in regards to 3D-Printing and stuff like that
Way to commit to the lore and spend thousands of dollars for this project! They both turned out great!
thank you for releasing such awesome things into the world
The effort that went into this. You are a legend man!
ALCREMIE WHIPPED CREAM DISPENSER!!!
OOH ME ME ME!! HEY!!! _Make a Kyogre floatie._
The sad dead goldengo scene
Okay realtalk the roughness actually makes Gholdengo look way more legit
Adds a lot of texture to it too
ALWAYS THE BEST VIDEOS FROM THIS GUY
Great job with that gilding, I'm actually surprised it was doable considering the small spaces that the figure has like under the hair
For the elevctroplating failure I think an issue was that sanding is not enough, I don't think it being 3 pieces glued together was the issue, since in that caae you could've plated all 3 and then glue them at the end
But to get a good result you have to make sure that your print is absolutely perfectly stupidly smooth and sealed, normally requires a couple layers of primer and resin thin resin coating, but hey.....at least ABS is easier to sand than PLA, becuase you will need to get to a couple 1000s level grit which means a couple of hours/days
But nonetheless great project, yoy always keep finding new original ways to create each pokemon!
Yeah, gilding is absolutely a nightmare if you’re not using copper leaf. The gold leaf is so much more difficult not because of how thin it is, but because it’s softer. This makes tearing it really easy, where as with copper leaf, you can be a little less careful.
If you’re hoping to get into gilding, use copper to start so you can get some practice that isn’t 70$. For initial application with copper, using your fingers to hold the leaf is fine, but DO NOT touch it with your hands once it’s been laid down.
with gold leaf, NEVER use your fingers, as it sticks between the ridges in your fingers very easily, and it’s hard to wash off. In my personal experience, brushing in sweeping motions isn’t the best way to smooth it over. Instead, utilize a pair of plastic tweezers, and a toothpick to help maneuver the leaf. Once applied, gently poke at it with silicon clay tools. This allows you to apply force without risking a rip.
Rather than using the brush for smoothing it, after you leave the leaf for 24 hours use the brush to remove excess leaf without tarnishing the surface. If you want to protect the layer, use a VERY thin coat of UV resin
As for gilding glue brand, the brand Mona Lisa makes very reliable and easily usable glue. When applying to plastic, have a dedicated silicone tool to apply the glue, and this will allow you to gild tiny details much better. I also find that it’s most effective to leave the entire leaf on the model until it dries instead of trying to brush away excess while still not cured.
Sincerely: someone who loves gilding their plastic models
Chandelier sized chandelure?
Came for Gholdengo, stayed for Gimmighoul chest. Love the video!!
I actually have a Pikachu golden plated card I got from a yard sale a few years back. It has some scratches, but it looks great
8:34 But I like Legends Arceus
Make a pyukumuku rat trap
Thats actually a good idea
I'd sell my house to buy that.
Galarian stunfisk bear trap
@@Red_og4444 And a live Ursaring to go with it.
Please no rat traps they are often super inhumane and cruel :
Looks great! I wont lie I kinda wanted to see at home gold plating but I totally get why you went the route you did. I forgot this channel isn't millions of subscribers strong. IDK why its not though.
Great Video!
The lady who said they can’t just magically plate a model in a few seconds is lying out of her ass. I watched a guy electroplate Custodes models gold and in his video he said(and showed) that playing with gold literally only takes a few seconds once you have the tub set up.
tbh Goldengo lookin kinda like a specific cheesy mascot....
Love the content and definitely worth that thing is sick
awesome project as always!
He is in correct 1 month ago in the Pokémon center in Taipei you could buy a limited edition coin of dragonite and pikachu
This would be super easy, and has probably been done already, but I would really like to see a lotad trinket dish for jewelry. The lily pad part could come off like it’s a jar, and you could hang drop earrings off the rim of it.
I love this project
6:56 Hunger Games reference???????
I've been wanting to learn to electroplate at home for a while! It's so intimidating lol.
After that purchase we’re getting a Garbodor made of trash next vid
Top ten saddest anime deaths 9:02
You could do a pokemon shiney full scale Umbreon Nightlight where the rings glow at night
yes! umbreon supremacy of the night!!
@@EmiyaHikari And the best Eeveelushen shiney
Ngl I’d like to see a Alolan Raichu car battery
(Normal Raichu is my favorite Pokémon)
Woooo I love gholdengo
I may have destroyed some gold leaf when I accidentally found a really cool container
gold!
It looks amazing!😁
The pain in the butt process was toddly worth it😍
Perfectly timed for yhe Shiny Gimmighoul event.
The finished Gholdengo even looks more like the shiny.
Looks like the scenes of the surfing gholdengo where taken with the mind-control feature from the scarlet-violet dlc "indigo-disc".
This is a reminder to sign up for this guys Patreon. He really needs it now.
It was absolutely worth it
Squirtle standing buble blower
The microplastic count in this guy’s house must be insane. I have one large 3d print and I find nurdles everywhere
the gimmeghoul chest might be my favourite device yet
Holy crap I have a Golden Jigglypuff slab. It was my uncle’s, but then he gave it to me
It looks really cool and realistic!
Make a RC revaroom
So just a thought for Goldengo to make his eyes more noticeable put a small layer of black around it
i rarely make comments but wanted to comment bc i enjoyed this and wanted to boost it!
I’ve actually owned that Pikachu bank for over a decade lmao, very neat seeing it used like this
Looks bloody good!
Of course he did 😂 At least he didn't make it out of actual coins, that would have been too much 😅
"look what you made me do pikachu" omg pikachu featured on rep tv confirmed
Same as your last video i recognize where you were sitting when you got coffee from corner bakery. It scares me how much these two videos have shown of your location.
You should make a magnetite drone
IDEA! YOU SHOULD MAKE A GIMMIGHOUL CHEST FORM WITHOUT COINS AND YOU CAN PUT YOUR CHANGE IN IT LIKE A PIGGY BANK!!! The more coins, the more the gimmighoul gets buried in coins!
It looks cool
This project was definitely worth it, you now have your very own Gholdengo 🤑 🤑 🤑
Make spinning Klink line gears ⚙
that is reeeeeeeeally cool
Thanks, Zak. It's worth it!
Idea for a smaller project make a necrozma that’s musou black
Staryu Starmie aquarium skimmers and victreebel bug catcher and dragapult darts and board and snorlax/miltank/clodsire door stoppers and literally any crab Pokemon staplers and finally a torterra bonsai plant I could go on....I love you for this channel ❤❤❤❤❤
"THEY AINT BELIEVE IN US,
ARCEUS DID"
-DJ Gholdengo
dude given wut u had to work with and and staying on budget and going through much trial and error, im just saying, it looks AWESOME. seriously id actually buy it great job as always
The squirrel hair brush is WILD to me
3:08 got me good 😭😭💀
I'm surprised you didn't sand down the Pikachu fingers to make it more like ghimmighouls hand
Sick work
this video makes me feel 🤑🤑💴💶💷💴🪙💰💳💎
"AUUUOOGHH THAT WAS ALOT OF MONEY AUUUOOOGHH"
I had one of those golden cards as a kid! I have no idea what happened to it.
next video: bigrig makes a muk out of real toxic waste
absolute fire
if you were to create a Tatsugiri stress toy my life would be complete (Tatsugiri is my favorite Pokémon)