Crv maintenance and suspension overhaul! Aerogenics lift kit! Skunk2 lower control arms!

Поділитися
Вставка

КОМЕНТАРІ • 48

  • @ShenryRNBSN
    @ShenryRNBSN 3 роки тому +3

    Got this same car. Getting ready to graduate from nursing school. Let’s just say my 2nd gen crv bout to be sick. She’s been maintained nicely over the years. Time to make her fun.

  • @Blackstare
    @Blackstare 2 роки тому

    That Super Mario Land 2 music maaaan! Really brings back some memories. Keep up the good work! Im about to do the same on my 02 CRV.

  • @Marcelzkuztums
    @Marcelzkuztums 3 роки тому +1

    Great Job man greetings from Costa Rica, was on UA-cam looking at crv vids since I just got my 02 speed one and this vid popped up. Great content

  • @SLPRWRKS
    @SLPRWRKS 4 роки тому +2

    Sheesh that’s a lot of work good stuff man

  • @tatialo37
    @tatialo37 3 роки тому

    Cool video!! Have a 06 CR-V and it needs a lot of work!lol

  • @molaroismorais1955
    @molaroismorais1955 3 роки тому

    Great job, brother.

  • @n3clar
    @n3clar 3 роки тому

    Great content... Keep up the good work

  • @efrainrosario281
    @efrainrosario281 4 роки тому

    Great job bro

  • @rochav261
    @rochav261 3 роки тому

    Great content, I’m ready to do all this to my 05 now ✌🏼

  • @UntamedNLeasheD
    @UntamedNLeasheD 7 місяців тому

    🔥

  • @millcitychris4303
    @millcitychris4303 3 роки тому +1

    I have a 06 crv and i wanted to change out the driveshaft support bearing or what ever. Should i just buy a new driveshaft??????

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому +1

      Yea I'd just buy a new one. They're about $175 new and super easy to replace. The center joint is sort of like a cv joint.

  • @MontereyBayLounge
    @MontereyBayLounge 3 роки тому +1

    What lift kit did you get? Or how many inches?
    Wondering if I only go with 1 inch would I need motor mount and transmission adjustment also?

  • @chris5310
    @chris5310 3 роки тому

    You know your shit, good job

  • @34built30
    @34built30 4 роки тому +1

    💪💪

  • @tim0thyd951
    @tim0thyd951 2 роки тому

    What socket/tool did you use to remove the bolts on the original rear lower control arms

    • @sleeperworksgarage
      @sleeperworksgarage  2 роки тому

      There's a socket that came with the aftermarket control arms.

  • @Ru_is_that_you
    @Ru_is_that_you 4 роки тому

    keep grinding 💪🏼💪🏼💪🏼

  • @tatialo37
    @tatialo37 3 роки тому

    Damn, buen provecho!!! Food of champions!!!🇵🇷

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому +1

      Thank you and you already kno!! 🇵🇷 💪💪

    • @tatialo37
      @tatialo37 3 роки тому

      @@sleeperworksgarage yeah, boiiii!!!!

  • @MaximumDIYGarage
    @MaximumDIYGarage 3 роки тому

    Great work, Red! That my friend was a lot of work! When you took that valve cover off, boy that was a lot of tarnish on the engine components! Is that typical of a 200k mile engine or do you think it may have skipped a few oil changes? I've opened a 5S-FE in my 97 Celica at 203,000 miles and it was a light-gold color, not dark copper like this CRV. Any thoughts? And for the instrumentals... the first one was Mario theme? and the second one is Vaudeville dance tune..., right?

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому

      Thanks!! Yea I'm sure the previous owner skipped a few oil changes. If they kept up with them it would definitely be a lot cleaner inside. Also they are both Super Mario Land instrumentals!

  • @fudogchomp
    @fudogchomp 3 роки тому

    Subbed ! ! I looking to get the same little truck too later on. What’s up with that bike though 😁

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому +1

      Dont worry its coming to the channel! I have some upgrades I want to install. 😁

  • @MRCALIEMS
    @MRCALIEMS 3 роки тому

    Good shit brother! I watched the shit 😂🤙🏽

  • @raulagtina237
    @raulagtina237 3 роки тому +1

    Hey may a ask where did you get that rear lower control arm

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому +2

      This was a customers crv. If I'm not mistaken he got them straight from Skunk2. They are 02-06 Acura Rsx rear lower control arms.

    • @raulagtina237
      @raulagtina237 3 роки тому

      @@sleeperworksgarage ok thank you 🙏🏽

    • @tatialo37
      @tatialo37 3 роки тому

      @@sleeperworksgarage I put 01-05 Civic si suspension parts on mine! Same frame! That's what is good on Honda's. The parts interchangeable! I have three, a CX Civic, mini me , a 06 CR-V and a new 21 HRV!!!

  • @chamirf
    @chamirf 2 роки тому

    Link for the parts?

  • @CertifiedShoeChewer
    @CertifiedShoeChewer 3 роки тому

    Super Mario land 2: The six gold coins. Bubble level.

  • @sabotagecat573
    @sabotagecat573 3 роки тому

    Where are you located?

  • @nexxracing
    @nexxracing 4 роки тому

    Oil runs through that timing cover ?

  • @gilbautista4785
    @gilbautista4785 3 роки тому

    Can u put a link to the items u used

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому

      I dont have links for everything. Most of it was customer supplied. What links are you looking for?

  • @dbald2525
    @dbald2525 3 роки тому

    I know this instrumental, can’t think what game it is from!!!

  • @carloscintron7262
    @carloscintron7262 Рік тому

    Tostones Oh Sh@&$ 😂

  • @robertjdaidaneh7682
    @robertjdaidaneh7682 3 роки тому

    Hey, i have a 2005 crv and i wanna lifted for 4cm rear and front
    What should i do?
    And what should i install on it?

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому

      Your going to need the lift kit and an engine lowering kit to cancel the axle vibration it will have from being lifted. I recommend to install only if your mechanically inclined. The job is very involved.

    • @robertjdaidaneh7682
      @robertjdaidaneh7682 3 роки тому

      @@sleeperworksgarage ok thank u so much
      But can u tell me how much do i have to low my engine if i wanna lift my jeep for 4cm up

    • @sleeperworksgarage
      @sleeperworksgarage  3 роки тому

      The jeep isnt going to need it like the crv will. The crv is fwd based so the subframe needs lowered to correct the axle angle. That small a lift on a jeep shouldnt give you any problems.

  • @santiagoarroyo3427
    @santiagoarroyo3427 3 роки тому

    It’s a Mario game I know that.

  • @tatialo37
    @tatialo37 3 роки тому

    Mario bros?