Sonax Cut and Finish Doing Some Real World Work!!
Вставка
- Опубліковано 11 вер 2024
- Sonax Cut and Finish is the medium cut compound in the Sonax correction line. This video takes it from the test panel...to real world correction scenarios. We can tell it apart from other compounds on a test panel..but to guage the compounds complete potential, we need to take it out in the shop and put it to wok. Today, we do just that on hard, stubborn GM clear coat.
Sonax Cut and Finish.....www.amazon.com...
Sonax Cut Max.......www.amazon.com...
Sonax Perfect Finish.....www.amazon.com...
Sonax EX 04 06......www.amazon.com...
apexautodetail.com
@apexautodetail (Instagram)
@apexautodetails (Facebook)
@apexautodetail1 (Twitter)
That concludes the Sonax correction compounds. Any comments or experience with the product line is more than welcome.
Use them per your recommendation....couldnt be happier!
Why not ExCut? she is extra for exzentra.
I prefer this.....similar to liking Perfect finish over EX 04 06.
Hello dear sir, i would like to ask you if you have an expirience from SONAX all in one, AIO products. I can find a lot of videos for, cut max ,perfect finish, 04-06.bsd, pns...but NONE for their.AIO line.....sonax polish & wax No2, and No3 if you have any expirience would.benwelcome to share with us......here in europe.we dont have axcess to products like HD speed, BOSS AIO etc..........and we would like some opinion or a rewie on products we can find here like.menzerna 3-1, britemax AIO, e.t.c......kind reegards
I know I've told you this before but I really appreciate your videos.
I appreciate it every time!!
Also had good results with Sonax C&F and will adapt my technique after watching this quality, measured demo, many thanks! 👍🏼
Detail Mastery Brian. Knowing what products and tools to use is half the battle.
Amazing results!! 💎
Appreciate you sharing all of this knowledge!!
Thanks for reviewing the Cut and Finish,I really like it for a one step on GM paint with the urofiber pads. I will have to try the Lake Country wool pad with it. Thanks again Brian!
They are a perfect match!
IMO, any fiber pad that's used as a 1-step, most of the time, there will be haze/micro marring left behind. Way less noticeable on light, metallic, or hard paint. However, if you were to take a foam pad on the same paint with tape line, you'll probably see a noticeable difference in depth, gloss and clarity. Again, this would be more apparent on darker paint.
Your customers are lucky to have you B!
I am lucky to have them!
Damn that Camaro is SHARP!!
Gorgeous color.
Great job wish you could do mine. Thank you for being honest, your hard work and dedication. Their so many products and techniques. Thank you for sharing it with us.
The most trasparent and honest statement....FINALY a youtube detaiLing channel telling then thruh......!!!! YOU SOULD PRESERVE CLEAR COAT ON A DAILY DRIVER CAR!!!! You are so correct dear sir......every one telling on chanells how tonget...show room perfection and NONE tell to.people that this is NOT proper for a daily driver witch will be scratched agan soon.....GINGRATULATIONS
Absolutely!!👍
wtf r we using sandpaper 2 wash car.lol.another great video again buddy
Brillo pad!!
Incredible results!!
It looks a bit better.🙂
Great video. I enjoy using it as well and it does leave a nice finish if one does not need the cut of a compound but the finish close to a polish. Perhaps you just added another polish comparison in one step compounding polishes with Cut & Finish. Comparing it some others like the new 3D One, Rupes UHS and even CarPro Fixer.
I can surely do that.👍
This would be interesting to see and curious how they would stack up against each other. Keep the videos coming as they are wnjoyable to watch with just enough content. I also forgot about Scholls S20 Black in that list.
That car was jacked for a newer finish. Looks like someone basically left it outside next to a water sprinkler that went on and off repeatedly. Looked nice after the work though!
😂 It is in better hands now.
I really enjoy cut and finish. On light color daily drivers, it may also fit the bill. I use it with the rotary with zero issue. Thanks brian! Ive been waiting for your thoughts on this one! Lol
Yes!...great with the rotary!👍
Which pads you used?
Would you comapre this compound to the new 3D one hybrid compound/polish??
Hey hey my camaro lol. Looks really good 👍
Sweet car! Georgeous color!!
Brian was thinking a heavier cut such as menzerna fg400 even with a standard orange cutting pad would that cut a little deeper and provide better Clarity at the end?
Impressive. 👍🙂
Brian I've stated before and here I go AGAIN, wow......wow...that Chevy paint was SERIOUSLY SERIOUSLY marred and talk about revival....ok, thats it you're nickname is Mr. MAGIC!!
😂 It just needed a bit of TLC.
Superb. I'd be happy
How does anyone let that new of a car, get that bad? Waow. Looks pretty good, now, though. 👌👌👌
Great video
Thanks so much for doing these
Quick question :
What’s your recommendation on polish with very little cut for the purpose of getting out very minor defects on a 1 year old White Subaru. Outback built in the US.
Finish is in excellent condition with very small scratches from washing and some other minor spidering.
Much much less than the Chevy above.
Want to do a two step on the Subaru
Sonax Perfect Finish.
nice videos, have you tried the cut & finish on soft paint ?
Very nice! Don’t see the 21mm much anymore.
I have no need for it unless I am doing a van or larger vehicle.
If that was mines I would polish ot to perfection mirror.. Looks nice in black.
great video B!
Thanks!!👍🙂
I'm a beginning detailer and I would like to know: how long did the exterior detail take with this car? What is normal for a professional like you? I think I take a bit long to paint a correct car..
One-step polish?
Two-step correction (compoun then polish). I did a mustang on 6 hours but i take my time and I take breaks for beers and food
Thanks Brian for this video! Dumb question: is red considered a dark colour? I have a 1994 MB SL600 - red...milky white blotches appearing on the trunk...can they be repaired, or is repainting required? Cheers and thanks!
May not be perfect but for 95% of the buying public this is perfect considering the condition it was in
Did I miss it or did u not say what protection it got?
Great vid as usual Brian
I saw on his FB post it was IGL Quartz 50ml.
👆
@ApexDetail hey Brian can you do a video on what it would take to get paint like that in perfect condition? compromised clear coat?
GREETINGS, WITH CUT AND FINISH AND A MEDIUM CUTTING PAD (ORANGE) I CAN GET GOOD RESULTS IN ONE STEP I WAIT FOR YOUR RECOMMENDATION I AM A NOVICE AT DETAILING, THANK YOU SO MUCH FOR YOUR TIME.
Is Sonax cut & finish good for polishing shiny black plastic pillars?
You should do Menzerna 2500 medium polish
Wow, looks amazing ! How long did this take you ?
Two days...off and on.
Hy Brian, for a black BMW 5 series, 2015, for a one step what you recomand? Sonax perfect finish or cut&finish? Y'm thinking tot team up with uro fibre 50/50 or yellow rupes pad. Your advice is more than welcome 😁. Thanks, love your work! PS Because your work inspired me, this will be my first project. Polisher will be a Makita po5000c. 😁
How’d it turn out? 🙂
Is 700 fair to do that kinda work I have Competition he cut his prices in half I was doing ceramic and full restoration 2 to 3 day and ceramic coat car and for 1300 without rims 1100
You charge what you are worth!
Don’t lower your prices, and do better than the cheaper guy!
I will turn away jobs if someone is looking for a cheap detail. 😉
Did you go over it again with Perfect Finish or is it just Cut and Finish? Thanks.
I believe he did the trunk lid only with perfect finish. Everything else he wanted to leave as much clear coat as possible.
What kind of tape are you using to protect the wing? I have blue painters tape from Harbor Freight that I'm using and seems to be ok, haven't had any residue issues as of yet.
3M precision...Found it at Autozone.
What do you recommend for a 2009 Mazda cx7 with mirco marring and auto wash scratches? I'm not sure which sonax product to use.
Sonax Perfect Finish and a white polishing pad. Or the Rupes yellow pad. 👌🏻
Why cant you live in Chicago. I would get your highest priced service for all my cars.
David Saucedo I feel the same way from Fla.
I get tons of out of state work!! You guys are welcome any time!!🙂
how doea it compare to angel waxs midrange polish/compound- thanks again
It is very similar to Angelwax Regenerate.
Hey Brian, how many pads did you use for the whole car?
Can i sand a car with 3k sand paper and polish with sonax perfect finish
My question is will it shine the sanding spots ?
Or which polish should i use for sandin my car because it has orange peel in trunk ?
I see you wore working a Flex polisher?was it rotary or dual action ?
Thanks
Dual Action 15mm
what about excut 05-05
Sonax told me that 05-05 is more aggressive and doesn't finish down as well, where Cut and Finish is designed to finish better.
@@danlc95 there both same thing almost excut is for da cut and finish for rotary
@@danlc95 excut finishes very well
@@hakman239 - No kidding? Did you notice it one cut better, or was easier to wipe off?
@@hakman239 - Good to know. If they're both great at finishing, no way we can lose!