Automotive speakers need 4 ohms resistance for the amplifier not to become damaged right? Placing the LED's in parallel to the speaker changes the resistance does it not?
Lol I did this about 15 years ago on a car audio system. Just run a separate small amp to run the lights rather then connect them to the speaker directly.
What do you mean a separate small amp could you explain further. And what benefits dose that have im trying to make this at home and i have no idea what im doing.
I'd be worried about the glue right on the cone. If that speaker had more bass and excursion, I'm not sure how well that would have held up. Maybe even rip the cone.
The leds are pulling more power then the speaker so it’s distorting as it is playing so y wouldn’t I just run a wire to a separate speaker channel instead of putting the leds directly linked to the speaker
You couldn't described about that capacitor and capacitor's wiring, also didn't about capacitor's value. which is clearly visible at speaker's connection point... Kindly mentioned it..
It's a filter capacitor. It's for the speaker not the LEDs. The cap filters out a certain range of frequencies that the speaker wasn't designed to play. Check out low/high/bandpass filters for more info. Also this method will destroy your amplifier eventually
This method is not good. It needs something that will allow the LEDs to light up at the same intensity even the volume is at 5% or at 70%. It should react to the beats and not how loud the music is.
If it reacts to the sound intensity also I would prefer that because it's more immersive. Otherwise super loud and super quiet sounds get the same LED response? 🥸
Add a resistor in series to avoid burning up the LEDs. Good job.
What kind of resistor would I need?
Use 12v Led Light . They dont need any, capacitor or resistor, but they required more volume to light up
@@jonathandetro5014 1 kohm or so. Depends I. How bright you want it.
@@jonathandetro5014 great work
Congratulations, a great project
What is the specification of the capacitor you placed? Thanks
Automotive speakers need 4 ohms resistance for the amplifier not to become damaged right? Placing the LED's in parallel to the speaker changes the resistance does it not?
How can I get the lights to only come on during bass notes? Like subwoofer only levels?
Use a crossover
And it also needs a power source and a current limiter.
If anyone was wondering, I believe that a 330 ohms resistor for each LED in the series would prevent any damage to the average LED.
What about 1k resistor for each in parallel
Sir as i noticed,you did not put resistor to your led's.. is it still ok?
Omg 😳 im listening wake me up while i watching this video 😳😳😳❤️❤️
You have to place a resistor in series with the leds for protection....
Step one .. get high brightens bulb
Step two...... high brightens
Step three..... buy new 👀 eyes😂😂😂
Which instructions you use between 2:30 to 2:40 minutes.
Music played in woofer was Avicii's right?
Kumar what you install at the back of the magnet?
I have done this to my sound system but when i turn up the volume the light burn
Do with 12 volt led strip,100%work
@@tomsonpaul3526
'
try connection with a resister would be fine and no burn LED out
Amplifier life reduces
3v leds ,they die on 6v
😂🤣
Technically that's taking sound away from the speaker, is there another way without connecting them to an amp?
but a question I have done It after some time my bass ic was broken due to it is this happened to u also or this is not because of led pls guide me
Bhai kam volume per bhi hai kya 🙏
Bom dia honde encontro desse ledes para colocar no som cj 87 da LG fazendo dessa forma da certo assim?
Conectar directos los diodos Leds...es un riesgo en quemar la salida del audio del amplificador...existe otro metodo con un pequeño circuito...
Beautiful 😀👍👍
How the led conect to spk wire? With tr circuit or no?
Dessa forma posso colocar no meu som cj lg 87 que da certo qual o volume que você colocou para acender os ledes
I'm like a vincii, good video
how to join a big lighting mal with speaker
???🤔
Come puo funzionare? Non arrivano 12v sui cavi di un altoparlante
Lol I did this about 15 years ago on a car audio system. Just run a separate small amp to run the lights rather then connect them to the speaker directly.
We did that and we used Christmas lights, lol,
What do you mean a separate small amp could you explain further. And what benefits dose that have im trying to make this at home and i have no idea what im doing.
you need resistors or you will blow the lights! it will work but you wont be able to turn the volume up much unless resistors are in line!
Khan milengi bhai ye light
I try it on 150w subwofer and you don't want to know what hapent
what happened?
1 led start getting hot
2 it start smelling bad
3 led actually burn
4 wires of amplifier came together
5 amplifier do cabommmmm
@@franckigi1771 oh my god
Sir ye led kaha milenge
Boa noite você acha que da para mim colocar no som cj lg 87 estes ledes assim como você colocou e honde vou encontrar este lede Obrigado?
My light not blinking I connect to my home theater why bro I use 2v bulb
Led kitne vaat ki h?
Cool video
I'd be worried about the glue right on the cone. If that speaker had more bass and excursion, I'm not sure how well that would have held up. Maybe even rip the cone.
Its work in 1 light only plss reply me
Bro which light has to used please tell bro
Which kinds of lights are these
Onde encontro desses ledis pra comprar?
Im trying this tonight!
The leds are pulling more power then the speaker so it’s distorting as it is playing so y wouldn’t I just run a wire to a separate speaker channel instead of putting the leds directly linked to the speaker
Sir this editing softweare name ??? Plese
Só 3 leds que pode colocar?
You couldn't described about that capacitor and capacitor's wiring, also didn't about capacitor's value. which is clearly visible at speaker's connection point...
Kindly mentioned it..
It's a filter capacitor. It's for the speaker not the LEDs. The cap filters out a certain range of frequencies that the speaker wasn't designed to play. Check out low/high/bandpass filters for more info. Also this method will destroy your amplifier eventually
try LEDs that used for under dashboard in car it doesn't even need resistor... and in same time they are really colorful
This method is not good. It needs something that will allow the LEDs to light up at the same intensity even the volume is at 5% or at 70%. It should react to the beats and not how loud the music is.
If it reacts to the sound intensity also I would prefer that because it's more immersive. Otherwise super loud and super quiet sounds get the same LED response? 🥸
link led shop? pliss thx
Song you played is wake me up by avicii
What ia the song?
avicii wake me up
Speaker sound name
Spiker main kon sa capacitor lagta hain
Только 3 диода можно подключить? Больше нельзя?
Boa tarde? honde encontro desse ledes para comprar
Good vedio
Good luck der
It's brighter when audio is too loud.
Posso pôr em falantes de 3 wats aquele pequeno
i have thes speaker sony 3:26
hey good job
keep it up
Very good! liked :)
स्पीकर वाली लाइट कितने मिलेगी भाई
Might as welm add a resistor on every led or little diode
Which song in the speaker pls
Lover's Cry Avicii wake me up
vai 16 inchy box a ki kore set korbo..
Which capacitor did you use ???
63.v 100uf
Speaker price
My woofer ic has get blown out for this
Wonderful!!
Very good
nice video
12v පුළුවන් da
sir fuse to nahi gogi
Speaker kitne w ka hai
Sir hnd ba mka cra ng speaker pag nag kabit ng led
Amazing
Why these crafters never mention music names ?
Releasemusic music avicii - wake me up
Колонки из за этого не хрипят?
I hate speakers wat Have Rhode blinking Leds...
Vídeo song zhang dark i love you instrumental 👍🙃
What is the name of the music.?
Rip avicii😢
Bhai this light not working in car speaker.how to install car speaker
Koi bhi 8 Ofar Mein Laga Sakte ya led
Kon sa Cepasitor he vhai
just make AC-DC bridge and add resistor :) i did that and still 3W led works with 2kW subwoofer :'D
Any Videos on how to do that? Would love to do same with my Setup
MultiRay1956 hi, can i send you pictures of it trough facebook or email ect...?
Jike02 think you could send me those pictures as well? Could really use the help. Flamebmg@gmail.com
Flame BMG yes i can :) soon as i can open subwoofer box :)
Can I get those oics as well
sharkbait28th@hotmail.com
What is the size of speaker
GB's tech i'd say 4"
GB's tech & MOTORMINE 6.5
Isso eu amei fiz e fico show abrigado abraço
Qual é o seu som que você colocou e deu certo
Why need capacitor? It that to reduce voltage
If you dont use it and you listen to harder music the leds will burn.
This is a very good concept. My only concern is the LEDs dying. I will do this though. Thanks!
Led's will burn, it happened to me
heiko wurst-henning U have to add resistor to it to prevent burning
@@yashaswisisodia9841 what kind of resistor i mean how many ohm per voltage? or led?
U have to add a resistor of 78 ohm it cost 1 rupee
U can go to shop and ask him for a resistor for 3 volt led he will give u resistor per led is required
@@yashaswisisodia9841 78 ohms resistor for every led?! Or one resistor for 3 leds?
galing Naman Yan
song????
Why distortion
Led will burn if u turn't up the music
Nic
They will burn but to prevent it u have to add resistor....
A capacitor will work in this case
Jw
Anuj
Full music m chalaya to led fused ho jayegi
ভাই এই লাইট আমার লাগবে কিভাবে নেবো দেওয়া যাবে
The first Song is the intro from funneh and the krew songs
Nice bro
Qual a música tocada durante o vídeo
Wake me up
This is bed project..because the emplifire produced the a fix watt for only specars not for led ... so effect the sound quality ... not out good ..
You englesh is bed.
Ini langsung gk pake transistor gk papa ya,,?
Music name
U shld write music reactive leds