Freewing Tail Flame LED Simulated Afterburner Overview | Motion RC
Вставка
- Опубліковано 3 жов 2024
- Order yours here: www.motionrc.c...
For non Freewing motors, use this one: www.motionrc.c...
EU Customers shop here: www.motionrc.e...
For EU non Freewing motors, use this one: www.motionrc.e...
Motion RC Merch available here: motion-rc.crea...
Join this channel to get access to perks:
/ @motionrc - Розваги
For customers using the Tail Flame on 8s set ups. This afterburner in stock form requires the use of a 6s balance lead. For an 8s setup, you would need to use one 6s and one 2s battery so you have the 6s balance lead. If you are running two 4s battery’s to make 8s it will not work without modifying the connection.
I read a comment in your afterburner customer review section that mentioned something about being able to adjust when this light would start coming on by using an extra channel in their receiver. It makes sense to me, although I'm not sure how to make that work. Can you guys make a video giving us a tutorial on how to achieve that. I think that that would definitely skyrock the already high popularity of this great product... I really hope that you guys can do that for us...I really love this product! 😀
Thanks again for bringing it to us at that great price 👍🏾 👌
Have a great day...Greetings from Douglas, Arizona 👍🏾🌵🦠😷🇵🇷
I purchased one of the universal burners for the freewing Mig21 because it has an outrunner...the tabs on the back of my motor casing are just a bit too big for the 32mm adapter plate and too small for the 36mm. This is pretty frustrating that of all the adapters, none are the right size.
@@vectorvictor2911 Maybe you can exchange them for the ones that are only for Freewing motors...before doing that check if your motor has the two holes for the installation...I hope that they could help you with this matter and that the proprietary ones actually work for your plane...🤞🏾🤞🏾🤞🏾
So what do we need to do to modify the connection?
You can always just use a BEC.
Much more reasonable price than other afterburners!
Sweet! Such a clean installation and setup. These are must have additions for every EDF I have. So fired up🤘🔥about these units!
Glad you like them!
I just ordered these last week and installed in my Mirage 2000 and F-22 so far. Super easy install. They look great. And i got 4 sets for the price of one of the competitors.
Glad you like them!
Same here, I just ordered my 3rd set😁👍🏾
Well it's about time freewing. Nice little kit. Although I prefer mine hardwired in so I don't have to keep messing with balance plugs. Would also suggest you do a twin. Even on a single fan twin led units at an angle help throw the light out better.
And finally use foil tape inside the ducts. Does 2 things. 1) Obviously helps project more light out. 2) More importantly it prevents light bleed through the foam which can look terrible. 👌
I read a comment in your afterburner customer review section that mentioned something about being able to adjust when this light would start coming on by using an extra channel in their receiver. It makes sense to me, although I'm not sure how to make that work. Can you guys make a video giving us a tutorial on how to achieve that. I think that that would definitely skyrock the already high popularity of this great product... I really hope that you guys can do that for us...I really love this product! 😀
Thanks again for bringing it to us at that great price 👍🏾 👌
Have a great day...Greetings from Douglas, Arizona 👍🏾🌵🦠😷🇵🇷
Nice budget offering to add to the market!
Indeed!
So glad Wes is new spokesperson !!
😉 thanks so happy to be here!! (Wes)
They didn’t show the part where if you mount the afterburner on this specific plane (The 90mm F-22) you have to cut out a section of foam because the motor doesn’t fit with the afterburner light on. Smh they should of just showed it but I guess this is a video for the afterburner not specifically for the F-22.
Sweeet... Like what I'm seeing from Motion. 😉
Mine is on the way to try too
What a neat way to add an afterburner to other jets I've added in runners to!.
Without breaking the bank too!.
I thought that price was a typo. Bravo MotionRC 🎉
After watching this video the one thing i really like and would like to see it used on more planes is the removable battery tray
I need these in my life 🤪
Yes you do!
Mine the controller burned up first flight on my Avanti S V2 LED still works. Cheap!
The LEDs should be mounted on a truncated cone so that the light reflects and bounces to the rear, and minimizes light leaks to the front. The dark gaps would also simulate the injection vanes.
The gripen motor doesn’t have the2 screw holes for the freewing afterburner kit , it will need the other kit with the adapters
sooo COOL
Nice and easy setup. 👍🏻
Thanks 👍
Awesome MRC !!!!
Thanks 👍
I just ordered my 3rd one today😊😁😁😁👍🏾 Videos of my jets with these afterburners in mt channel soon😁👍🏾 Thanks MotionRC 👍🏾
I don't own a jet but , that an awesome feature
Great job.
good job guys, i was wondering why you didnt offer afterburners for your products since i first saw one...looks nice
Glad you like them.
This Motion's setup is way easier than the RC castle's version, in which you would have to throttle-calibrate. With Motion's setup there's no need to do that. You literally plug-and-play.
How do you throttle calibrate the tail flames from RC Castle?
I have two Freewing 80mm planes that I would like to add this on, but I run a telemetry sensor off of my 6S balance tap, is there an adapter that could accommodate both?
Nope… but I have always been able to help you! 😜😜😜
Can we see it in the daylight? They don’t seem very bright
Its the older led that I stopped using. You are right… not very bright
I do wish that was some that could fit on outrunners
Very nice.
Nice work
Thanks 🙏
So that adapter will oly work with an inrunner motor!
Although i would like a blue color with red flame would be cool
Always thought EDF's should have a LED on the outside of the circle and a center burner.... that would be amazing
Would be good if you had them in stock for the European/ UK☹️
We did, they sold out extremely quickly. More on the way
@Motion RC, No worries, I ordered 6 units from AliExpress, less than half the price of yours delivered to England🤣
As a side issue, I see that the EDF installed in the F22/90 is the newer V2 8S 4075-1350KV Silver metal? This is the new stock EDF? I only ask since I'm in the market for the F22/90 but seems that the current HP/deluxe version is advertised as having the older 8S 4075-1390KV...🤔
Will Motion be offering a 70mm option?
And a twin option?
This world look sweet on my Freewing twin 70mm SU-35.
You guys just put Goniac out of business with this awesome product with an even better and affordable price tag! 👌 😱 You'll sell thousands of those kits! 😁👍🏾
Yeah, cyclone power is a wee bit more expensive than these freewing units too and only edf size specific
Mine is still brighter and actually hand made… if that doesnt matter to you then get this! All good! 🔥🔥🔥🔥
Para nada, estos se ven medios tecatos y no brillan mucho
I did not getting did not showed the connection to the receiver 😢 did he use a y cable to the trotter receiver? Not sure
THis is great.........can you tell me about the F-105 behind you? The Thud is one of of my favorite planes
It’s the Freewing 64mm available here at Motion RC
Thanks, look like they are sold out, will keep on checking@@MotionRC
Awwww man!! What about us 64mm EDF guys?
It's a pitty it does not have the startup flickering like the RC Geek's got. It simulates the afterburner startup better.
It's also 1/8th the price so.
Can't have everything at the price point
@@MotionRC exactly!!
I bought 4 already and they are sweet
@@PhilipAlonzo I just ordered my 3rd one, and they are great😊 I'll be posting a video of my F22 Raptor 90mm with this afterburner light installed soon😊 Thank you MotionRC for this great product 😊
I don’t like the idea of powering it from half the cells in the pack. Seems like it would cause the cells to discharge in an uneven manner. What is the current draw on one of these? I think if I get one I will be using a DC-DC buck converter
Not enough to notice. They are just LEDs
Hello, Great Afterburner is there one for The Viper 70 mm i want one.
Wes, mine comes on as soon as I move the throttle from the off position. Your video says it should come on at 1/2 throttle. Is there a way to adjust this, or do I have a faulty afterburner?
Great product and video demo, however I have an issue with mine. All lights work on my 80mm F14 when I plug the lights into the battery balance leads. As soon as I connect my batteries main power cables up, the afterburner lights go off. Not sure why as they afterburners are connected to my throttle channel. Can you please advise? Thank you
Please reach out to our customer service department. They can help get you fixed up.
GREAT !!!! But "Not in stock" in Europe Motion RC shop :(
They were. Unfortunately we sold out this morning. But hit the notify me when back in stock button so you’ll know when they come back in stock.
Guys don’t forget to install your LED wires along the motor wires…..
You know a thing or two about this 😉
@@MotionRC haha yes 😂
Will there ever be one for smaller 64/70mm EDF's?
Especially 70mm
can i use it on F14 using 2 of them with y cable???
Yes that should work. If you have inrunners on your F-14.
Did you run the power cable along side and tucked in next to the esc? How that work for you...avoiding the front of the intake .
Are these compatible with all jets? Do I need one per EDF?
When will these be re-stocked?
Thanks.
God damn it. I wish I saw this 7 hrs ago. I just ordered the F22
hey there, great videi0 but can you tell me why the website says won't work with Avain smart escs"
The Spektrum receiver sends power through the signal wire and will burn up any afterburner plugged into them. The only way around this is if you run your afterburner in a separate port and mimic the throttle channel in that port.
Did not explain if he use a Y cable for the throuter connection
You can or just plug it into an open port and mimic the throttle channel
Hi,
I really do like the look of them from the spec sheet it says 12.5V to a MAX of 24V from the video it looks like using 3 cells and also on the website picture E631 is using 3 cells BUT E632 it's a bit hard to tell whether it's using 3,4,5 or 6 cells from the picture.
Now to my question people who have a G2 Spektrum 6S batteries (No balance lead) Would a full charged battery 25.2V (I know under load the voltage would drop a little bit and soon would come down to near 24V and below) likely to burn out the afterburner or not?.
At the moment they are out of stock on the E.U site BUT I would be very interested in getting some when they are in stock.
Steve
Can 2 be used together? I bought 2 for the freewing mig 29 and they aren't working together
Hi quick question I just got a freewing f-35 ll v3 70mm will that fit it because I only see it say 80 and 90 can you please help
Can it work in MiG29? If I have 2 where can I plug the other lead into the rx? Y lead ? Thanks
Blue lights as well as the orange would have been great... not interested...rethink rebuild..
Looks awesome, but I have 2 questions:
1. have a voltage sensor plugged into the balance lead of my battery, is there a way to use the sensor and the afterburner together?
2. What are the diameters of all the non-freewing adapters?
I think that they might mentioned that in the product description... They come with a good variety of adapters that should fit most 80 and 90mm motors... I think that you'll find the one for your application with this kit...Good luck...👍🏾😊
@@ricardopr54 Well I got one of the universal ones for the freewing Mig21...the tabs on the back of my motor fan are just a bit too big for the 32mm adapter plate and too small for the 36mm!
You can ‘feed’ it with 24V max. So a Y-harness directly from a 5S lipo can be used (e.g. male and female XT60 to an XT30 for the AB). 6S can be a bit tricky that way: fully charged you can get 25,2V theoretically. But under load it drops fast.
70mm?
Totally bs I just got ordered the gripen and recorded afterburner and surprises it not a direct match up need the " non freewing version "
If can
Any idea why my light stays on at zero throttle?
Yes, check the connection diagram.
Where's the link for the product? Is not in the video description...🤦🏾♂️ I want one for my F22 Raptor 6S...I just maiden her last weekend... Please share the link for the afterburner light... and maybe a discount with proof of recent purchase of any of your models...😁🤞🏾😁
----------------------------------------------------------
Update 03/21/2023
Today I ordered my 3rd set...
Thank you MotionRC for this excellent product 👏 👌 🙌 👍🏾🌵🦠😷🇵🇷
sorry, link is in the description now, or find it here: Order yours here: www.motionrc.com/products/freewing-tail-flame-led-lights-for-80-90mm-freewing-edf-jets-e631
@@MotionRC No problem my friend!... Ordering one just now! THANKS 😊 👍🏾🇵🇷
@@MotionRC I ordered 2 sets, one for my F22 6S and one for my Avanti S... Order #680596...😁👍🏾👍🏾🇵🇷
@@ricardopr54 which model should be taken for the f22 6s ? Does the motor have 2 holes for the screws?
which model should be taken for the f22 6s ? Does the motor have 2 holes for the screws?
Does this work with the Freewing F-22 V2 64mm?
No. there is no option for a 64mm yet. Probably a weight issue in the smaller models
I mounted it on a freewing f-16 70mm 6s 4000mah battery, the led stays on all the time is this normal?
Check your connection going to the Y harness if it’s plugged in backwards this will make it stay on constant
I am facing the same issue too. Connection is correct. It does get bright towards full throttle. But it stays on still at zero throttle
@alwaysflying6540 Can you please elaborate? There are no hints anywhere that the controller is programmable. Are you using a spare port on the RX and adjust via mixing?
Tried one similar (I think same?) on my 8S F-22 and connected it to one battery balance lead and the wiring to the burner melted. There must have been like a ground loop or something? What is different with this Freewing one that stops this happening?
There is a recent video put out by motion rc that explains how you need to connect the batteries so that does not happen. I did the same thing and fried my first afterburner. It all depends on how you plug up the batteries so that it doesn’t send to much voltage to the afterburner.
If you have a spare channel can you mix it to throttle so it doesn't light up until 75% throttle?
Yes you can do that.
@@MotionRC time to get making curves in my TX 🤣
Would this fit on the freewing f14
Not at this time. The F-14 has outrunner motors and the tail flame only works with inrunner motors.
Do you supply adapter for out runner I have 70mm red arrows hawk t. 1
At this time no. We only have options for inrunners at this time.
Will this work on the 64mm f22 aswell.
No, these would be too big for a 64mm and the weight would make it hard to fly. Eventually we may make smaller ones, but started with our most popular sizes
@@MotionRC ok.
Right before you said for in runners only my 🦐 🧠 was thinking won't the wires get tangled.
So if you have a 8S setup and run two 4S batteries. Will this system work?
You will want to run a 6S and 2s Lipo. Or you can solder a new connector
@@MotionRCor you can put a 4s battery adapter in the kit?
Is there not one for the 70mm? Or will these work
We do not have one for 70mm currently. Just this 80mm/90mm to start.
Balance connector a 4s for a 8s setup?
One 6s and one 2s 😉
Want put in a10
No you don't.
A10. No afterburner....
I just bought this. I have the 8s f22. I using two 2 - 4s lipos. Can I cut the 6s jst and put a 4s jst ? Or is this 6s only ?