Freewing F-16 V2 90mm Unboxing & Assembly + Afterburner LED Install!

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 83

  • @Mach3RC
    @Mach3RC  3 місяці тому +3

    Please use the timestamps to hop to the part you need! :) Thank yall so much for all the amazing support. Can't say thank you enough. Hope you enjoy this unboxing and stay tuned for the maiden flight!

    • @M4rkmcc21
      @M4rkmcc21 3 місяці тому

      Appreciate the extra time u spent putting the timestamps in mate really helps the viewers 👍🏾

    • @FlamingF18s
      @FlamingF18s 3 місяці тому +2

      It’s amazing that you went from 64mm f22s and f-16s to this absolute monster of an aircraft! Congrats man and I hope the f-16 works amazing

    • @FlamingF18s
      @FlamingF18s 3 місяці тому +1

      And also the fact that you went from 30k to 112k in like 5 months!

    • @FarmerFpv
      @FarmerFpv 3 місяці тому +1

      Congrats on 100k Subscribers. Glad you went with the f-16 instead. She is a better flyer and lander than the F-22 IMO. I have the original and it is awesome. I also ordered the ARF plus V2 F-16.

  • @Planeedits1
    @Planeedits1 3 місяці тому +5

    100k man you are the best UA-camr out there 🎉🎉🎉🎉😊

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Haha no way, but thank you so much! 👏🏻

    • @Planeedits1
      @Planeedits1 3 місяці тому

      Of course this is why i got into it😊

  • @hafsahhosein9925
    @hafsahhosein9925 3 місяці тому

    This has to be one of the fastest growing YT channel for RC I've ever seen. Awesome work. Your channel brings such amazing relatable content. Kudos.

  • @BirdmaanTV
    @BirdmaanTV 3 місяці тому +3

    Congratulations on the 100k Subscribers! 🎉🎉🎉
    That thing looks B-E-A-UTIFUL! Plastic edges are a must on any plane over a few 100$.

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      Thanks so much Birdman!! It's such a good looking plane. I low-key think the plastic edges are one of the best parts.. lol

  • @mayacelinee
    @mayacelinee 3 місяці тому +3

    Congratulations on 100k 👏🏻 keep up the absolute stellar content & can’t wait to see this maiden 🤍

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      YOURE THE BEST. Thank you for always filming, allowing me to take over our house with rc planes, and being down any night of the week to go fly. I appreciate you so much

  • @RCCruiser
    @RCCruiser 3 місяці тому +3

    Absolutely incredible! 😲 Gorgeous! 😍
    Can't wait to see the maiden!

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      Thanks for watching!! I’m so excited for the maiden. Keep your eyes out, got a few big maidens coming!!

    • @RCCruiser
      @RCCruiser 3 місяці тому

      @@Mach3RC LETS GOOOOOO

  • @rcplaytime
    @rcplaytime 3 місяці тому +3

    that's an absolute stunner of a plane,love the afterburner 👍👍👍😀😀😀👍👍

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Thank you so much! KM RC kills it with their afterburners. Can't wait to see it flying!

  • @3DPrintHangar_RC
    @3DPrintHangar_RC 3 місяці тому +5

    This is insane that you have 100K!!!!!!!!! LETS EFFFIIINNN GOOOO!!! TO THE MOOOOON!!!

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      BRO IT IS SUPER INSANE! I'm still in disbelief. Thanks for always bein there for me man! YOU AN OG!

    • @3DPrintHangar_RC
      @3DPrintHangar_RC 3 місяці тому +1

      @@Mach3RC Bro with the QUALITY content you’re putting out there it’s no surprise 😎 It’s just about time people realized how FREAKIN LEGENDARY YOU ARE💪 Onward and Upward

    • @cybersecuritydeclassified4793
      @cybersecuritydeclassified4793 3 місяці тому

      @@3DPrintHangar_RC I was like his 500 sub just months ago!

  • @SGTGHOST143
    @SGTGHOST143 3 місяці тому +2

    AHHHHH🎉🎉🎉 Congratulations!! Dude I have been eye balling this thing but oh god the price is tough rn! One day!!

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      Thank you!!!!!! Appreciate you. I agree, the price is very steep. I needed to break out the special occasion card to justify this one haha. Maiden coming soon!

    • @SGTGHOST143
      @SGTGHOST143 3 місяці тому +1

      ​@@Mach3RC Honestly you pushed me to start a channel in general. I love seeing the vids you create on the RC hobby and I'm hoping to delve more myself into it!!
      Got my Avanti S V2 jelly with how much I've been looking at this F-16. What really sold me on it was the functioning air-brakes. I had the month prior to its release had said "I wish someone would come out with an F-16 with air-brakes." Then boom, Freewing and in a beautiful paint scheme that has my favorite color. Ngl, I want to do more RC content, and you have been a massive inspiration! So I guess thank you!

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      The Avanti is a wonderful plane! That's so awesome to hear. Please make RC videos!! I'd love to check them out. I appreciate the kind words so much

    • @SGTGHOST143
      @SGTGHOST143 3 місяці тому

      @@Mach3RC It is a dream to fly, and for my first EDF, I couldn't be happier with it. I am definitely a prop guy more, been looking at the 1600mm Flightline Corsair (Massive Corsair guy lol), but have been loving the Avanti and want an F-16 to go with me to the field! As soon as I have the ability to post higher quality videos it is definitely on the idea list! I wanna give a flight review of the Avanti V2. Thing rips and in a dive can smack close to 130mph!!
      Trust me though! Right now it may be the Warthunder content, but I have plans to get into recording the RC hobby. It is in the cards, and I definitely don't plan on stopping or giving up my channel anytime soon! And no problem! We are all really in this hobby and YT space together! I wanna see and help it grow too!

  • @RcLando
    @RcLando 3 місяці тому +3

    She’s absolutely beautiful 🤩

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      The details.. I LOVE THE FRIGGIN DETAILS! Thanks so much for watchin'!

  • @tonyyimbo
    @tonyyimbo 3 місяці тому +2

    Man 100k already nice! Can’t wait for the maiden

    • @Mach3RC
      @Mach3RC  3 місяці тому

      It’s mind blowing. Thanks for being here, watching, and commenting! Gonna get that maiden done ASAP

  • @Sgtbowman71
    @Sgtbowman71 3 місяці тому +3

    Nice plane! good luck on the maiden

    • @Mach3RC
      @Mach3RC  3 місяці тому

      I appreciate it! I'm gonna need it 😅

  • @papapsadventures6119
    @papapsadventures6119 3 місяці тому +2

    Nice build video!!

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Thank you! So happy you enjoyed it

  • @stevencole8881
    @stevencole8881 3 місяці тому

    Great looking plane. Freewing did an awesome job. Only thing that seems to plague a lot of companies who make F-16s is the canopy mounting.

  • @Reptielenfreak
    @Reptielenfreak 3 місяці тому +2

    Congrats with the 100k!
    Stepping up the game with the f16 90mm! Next level stuff
    Hope you can try some grass ops take of and landing for us😬

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      Thank you!! I got great news for you, maiden will be on a grass runway. Coming soon! 😊

    • @Reptielenfreak
      @Reptielenfreak 3 місяці тому

      @@Mach3RC great! I hope to see the video soon. I wasnt suprised you got this jet when i saw you commenting in the motionrc live show haha👍 wish you good luck with the first flight and enjoy!

  • @alexthebest1869
    @alexthebest1869 3 місяці тому +2

    HOLY SHIT, sick plane

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Thanks Alex!

  • @cybersecuritydeclassified4793
    @cybersecuritydeclassified4793 3 місяці тому +1

    Sweet! Mines coming in tomorrow!

    • @Mach3RC
      @Mach3RC  3 місяці тому

      OHHHH YES! Install went fantastic, you're going to love this bird. Can't wait to fly em!

    • @cybersecuritydeclassified4793
      @cybersecuritydeclassified4793 3 місяці тому

      @@Mach3RC It’s here buddy! When the box with blue tape shows up, I get excited!!!!

  • @FarmerFpv
    @FarmerFpv 3 місяці тому +2

    Nice Bro. Can't wait to see your maiden flight. I bought the ARF Plus version and going to run it on 8s or 10s with a Schubeler.DS-51-AXI HDS 93mm EDF unit and Castle Creations high voltage OPTO ESC with a CC-BEC to power the servos and retracts. I'm also making some DIY rear brakes using micro FPV quad pancake motors. They require no power to operate. You just make a servo switch that connects all the phase wires together and it will slow the jet down. I find reverse thrust is not enough with the short runways I have in my area. If you ever hold a brushless motor and touch the 3 wires together you will see it gets hard to turn the bell on the motor, but that will be more than enough to slow the jet down fast. That is my idea for the DIY brakes. I have not seen it done before. I have done it on an RC car before just for fun like pulling an e-brake. I should make a video showing how it's done. It's super easy. The hard part is finding the right size motor that fits in the tire as it will replace the rim. Then you use anabolic Loctite to fasten the stator to the axle so it is permanent. Yup, I'll make a video. It's been years, and I'm rusty at it. That's why I watch pros like you.

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Bro I appreciate your info and insight so much! Definitely make a video on that, I’d love to be educated. We will see how she does on a grass runway. Luckily it’s long and wide, but can be slightly bumpy so I’m a bit nervous. Appreciate you watching & commenting as always!

  • @Brads-hanger
    @Brads-hanger 3 місяці тому +2

    Sweet vid working to get one to!!!

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Thanks Brad!!

  • @Cakey831
    @Cakey831 3 місяці тому +1

    I subbed for the beard alone.

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Never shaving now

  • @BrianLyons-uk8kn
    @BrianLyons-uk8kn 3 місяці тому +2

    Any chance to add the link for the Y harness to use the afterburner? What work rack, stand, support are you using to hold the jet while you work on it? Thank you

    • @Mach3RC
      @Mach3RC  3 місяці тому

      A lot are back ordered right now for some reason so thats why I didnt have them, but here is one I would trust, just a bit more expensive bit.ly/3Trp8kR and here is the link for the stand! www.motionrc.com/krrn9k

  • @samhatch4665
    @samhatch4665 3 місяці тому +2

    Do you know how you’d go about putting an LED afterburner on the FMS 64mm f16 you have ?
    I have the same one and I’d love an afterburner for it

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      That’s a great question! I haven’t tried but that’d be awesome. I’ll send KM an email and try and get some info on that!

  • @mikesmith31
    @mikesmith31 24 дні тому

    Looks like this video got you double the subs in 2 just months

  • @feelgooddany
    @feelgooddany 3 місяці тому +1

    Congratzz bro for 100k 🎉 woww
    I was here from the start .. think #400 sub
    Always like your vids.
    I'm a Rooki and order this F16 v2 tho and waiting for the delivery boy! You not gonna program tailerons? Please do a video ❤

    • @Mach3RC
      @Mach3RC  3 місяці тому +1

      Thank you so much and I appreciate you being here so early. All your comments mean the world. No tailerons yet, I want to see how it does as is and then I’ll look into programming those!

  • @mustangbelly1
    @mustangbelly1 2 місяці тому

    Love the passion in your vids mate. Keep it up. Just checked Motion RC Europe and they are out of stock. Aghhhhh.😫😫😫😫😫😫

  • @meunomeeplissken3088
    @meunomeeplissken3088 2 місяці тому

    Que nave cara , essa pra mim seria o jato ideal, 1200$ WOL ! That Crazy 👍

  • @cjb405
    @cjb405 3 місяці тому

    I feel this is such a common upgrade ppl want they should just add as standard now😂

  • @interceptorqc7534
    @interceptorqc7534 2 місяці тому

    Where did you take the rod that you tape the arterburner wire for the installation? Thanks

    • @Mach3RC
      @Mach3RC  2 місяці тому +1

      Sorry, I’m not understanding your question fully. Could you explain a bit more?

    • @interceptorqc7534
      @interceptorqc7534 2 місяці тому

      @@Mach3RCto pass the afterburner wire in the f-16 fuselage, you use a little rod:
      Where did you buy it?

    • @Mach3RC
      @Mach3RC  2 місяці тому +1

      @@interceptorqc7534OH! That’s just a coat hangar I took and cut and straightened out

  • @sawyerheslep8493
    @sawyerheslep8493 3 місяці тому +1

    I wanna see u fly a 700-size heli! Take a look at the new sab goblin IL pro!!

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Hahaha oh boy. That would be awesome but that absolutely terrifies me lol I’ll keep easing into that with the GPS Helis 😅

    • @sawyerheslep8493
      @sawyerheslep8493 3 місяці тому

      @@Mach3RC that's a shame.

    • @Mach3RC
      @Mach3RC  3 місяці тому

      @@sawyerheslep8493gotta ease into it. Those are pretty dangerous and I’m still fairly new to the hobby.

    • @sawyerheslep8493
      @sawyerheslep8493 3 місяці тому

      @@Mach3RC ua-cam.com/video/ffWgbIN7acY/v-deo.htmlsi=cdbHkcAw03V8im4F

    • @sawyerheslep8493
      @sawyerheslep8493 3 місяці тому

      @@Mach3RC
      ua-cam.com/video/ffWgbIN7acY/v-deo.htmlsi=cdbHkcAw03V8im4F

  • @capicadavid1995
    @capicadavid1995 3 місяці тому +1

    Can you do a video my friend how you set up the asx3 in the airplanes please

    • @Mach3RC
      @Mach3RC  3 місяці тому

      I’m trying to learn and be confident in that myself. I could definitely do a very basic set up video tho!

  • @stephenallen4374
    @stephenallen4374 3 місяці тому

    Be careful on landings and take-offs I've heard they can be a little twitchy get rid of the drop tanks and missiles and it will handle better have fun

  • @flywithmikefromchicago
    @flywithmikefromchicago 3 місяці тому +1

    We need the maiden STAT

    • @Mach3RC
      @Mach3RC  3 місяці тому

      ON THE WAY! 🫡

  • @HarimauBergaring
    @HarimauBergaring 3 місяці тому

    i didnt know the pawn stars guy flies rc planes

    • @Mach3RC
      @Mach3RC  3 місяці тому

      I’m not an expert on RC planes. Let me call my buddy who is an expert and knows all about em and I’ll give you an offer

  • @NIRBOK
    @NIRBOK Місяць тому

    200k

  • @henryairconcepts2999
    @henryairconcepts2999 3 місяці тому

    Freewing!!! please use VGA connector, we don't like wires

  • @stevendegiorgio3143
    @stevendegiorgio3143 3 місяці тому

    That's a very expensive R/C scale model aircraft.

  • @Whuckfisle
    @Whuckfisle Місяць тому

    doesn't come with an essential piece to power the light...unreal

  • @pinaxd1860
    @pinaxd1860 3 місяці тому +2

    Found the channel today, I was told like subscribe and comment. 🫡 saw the crashes today, one of the most entertaining rc channels due to your energy management keep it up!

    • @Mach3RC
      @Mach3RC  3 місяці тому

      Thank you so much! Glad you’re enjoying the content 🤝