How to Replace Rear Shock Absorbers 98-11 Ford Ranger with Torsion Bar Suspension
Вставка
- Опубліковано 14 гру 2016
- Buy Now!
New Shock Absorber Set from 1AAuto.com 1aau.to/ia/1ASSP01834
1A Auto shows you how to repair, install , fix, change or replace your rear shocks. This video is applicable to the 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11 Ford Ranger
🔧 List of tools used:
• 15mm Wrench 1aau.to/ofw/1AXAA00010
• 18mm Wrench
• 15mm Socket 1aau.to/oxv/1AXAA00015
• 18mm Socket 1aau.to/ogG/1AXAA00043
• Ratchet 1aau.to/oDc/1AXAA00016
• Socket Extensions 1aau.to/oxv/1AXAA00015
For More Info visit us at 1aau.to/h/8f/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√
Great vid and thanks!
I was scared to tackle this job alone, but I’ve replaced control arms and front shocks on my own. Thanks for the simple, straight to the point video!!!
I really like these people! videos get to the point and easy to understand! thanks !
Anything needing to be done on my Blue Ranger, the exact same model as your Red Ranger. If I've found a video you've done to replace something. 1AAuto videos are my go to every time! Hope you continue to make more videos. I also love your quality parts for less than most commercial parts stores! Keep doing what your doing 1AAuto!! Be around for a long time....
I love how you guys showed the easier one to do. The one next to the gas tank is a pain to get that top bolt out.
You do an excellent job on these videos young man. You have a nice voice and the instructions are concise and easy to understand. Very helpful!
Thanks great video got my changed in the auto part store parking lot. Very easy as long as your old shocks slide off the bolts easily.
I replaced both my rear shocks . Now the ride is stiff and bouncy. It that normal?
Thank you gentlemen. Now i can do it.
Best quality repair videos!
Great video. Very helpful. Thanks!
How do you know what is a good shock for the truck?
Are you able to do the other side without removing the spare tire?
1A Auto is soooo dope!
Looking for are shocks for an 07 .Ranger
Is there a torque that the top and bottom nuts should be tightened to, or just until it's pretty snug?
Great video. What is the torque on the shock bolts?
Just a tip, cycle your shocks incase there is a dead zone, you don’t want to figure that out when your car is on the ground
I am putting 2inch shackles on to replace my oem. Will need an after market absorber or will the stock size still fit with the new shackles ??