RSX Type S Clutch Replacement ! (Step by Step)

Поділитися
Вставка
  • Опубліковано 20 січ 2025
  • Follow me on IG @dennis_behrend98 👇
    www.instagram.com
    Stage 1.5 Competition Clutch 👇
    www.kseriespar...
    Competition Clutch Light Weight Flywheel 👇
    www.kseriespar...
    Honda Super High Temp Urea Grease 👇
    www.alldiscoun...
    Honda OEM Throwout Bearing
    www.hptautospo...
    Honda OEM Pilot Bushing 👇
    www.partsgeek....
    Feel Free to Comment Below!

КОМЕНТАРІ • 88

  • @rudy5360
    @rudy5360 4 роки тому +21

    Best DC5 clutch video on UA-cam!

  • @nilssvensson3786
    @nilssvensson3786 2 роки тому +1

    I have a 02 honda si. The stage 2 clutch that I hade on broke on me. I watched your video like a billion times and replaced it myself with a stage one. Thanks man fr!!

  • @Adam-kz8jn
    @Adam-kz8jn 4 роки тому +9

    Nice work man. Love the angles and love the walkthrough. I just got my rsx and I feel confident enough to tackle this job. Thank you

  • @dan8lim
    @dan8lim 7 місяців тому

    Super detailed step by step instructions. Makes me more confident on replacing my clutch if I ever have to do it down the road

  • @logantimberman3553
    @logantimberman3553 7 місяців тому

    I love this video breaks everything and actually shows how to do everything very helpful and encouraging will be doing this my self soon thank you

  • @McRib47
    @McRib47 4 роки тому +27

    just a heads up i believe honda recommends when torquing down the flywheel bolts do it in 3 parts. JUST FYI

    • @jordan_.zx10r
      @jordan_.zx10r 4 роки тому +1

      What order?

    • @McRib47
      @McRib47 4 роки тому +7

      @@jordan_.zx10r as in dont torque to max torque in the beginning split in 3 steps, 1st torque all 8 to 20ftlbs then 2nd time 40ftlbs and last 85ftlbs last round should be the heaviest as honda recommends according to the FSM. dont quote me on the number of ftlbs this was just a reference so go according to FSM.

    • @jordan_.zx10r
      @jordan_.zx10r 4 роки тому +2

      @@McRib47 I think it’s 90ft lbs for rsx I’ll do what you said

    • @angelmonroy9644
      @angelmonroy9644 2 роки тому

      @@McRib47 why

  • @chadwickwicky67
    @chadwickwicky67 2 роки тому +1

    Thanks for the vid man! definitely gives a diy a good idea of time frame and what’s needed + what should be replaced while doin the job that may be overlooked.

  • @Codi3000gt
    @Codi3000gt 4 роки тому +2

    Dude this video was super helpful. I'm about to put my trans back in.

  • @asdfasdf-rb3oq
    @asdfasdf-rb3oq 3 роки тому +2

    clutch disk actually looks fine. The tolerance is the rivets

  • @broke2bewealthy616
    @broke2bewealthy616 3 роки тому +3

    You did great on this video it help a lot but in future reference try not you a hammer cause metal isn’t the best try to use a Mallet but once again this video was great much appreciated

  • @VictorMoreno-fk6ul
    @VictorMoreno-fk6ul 3 місяці тому +1

    Did you have to take the starter bolts out? No mention of it. Or did I miss it?

    • @Rosaa007
      @Rosaa007 3 місяці тому

      A little late but no you don’t have to remove the starter

    • @keaton9541
      @keaton9541 Місяць тому

      @@Rosaa007 WHAT, are you serious? Ive been struggling with it for the past 2 days!! Everything has gone so smooth but doesn't the starter have to crank against the flywheel teeth to crank? Or do you mean i just have to remove the bolts and move it to the side? Please LMK its been delaying me hard and its getting real cold right about now up in Canada LOL

  • @87emagdnim
    @87emagdnim 3 роки тому +9

    What did you use to keep the engine level

    • @timetokillslapp
      @timetokillslapp 2 роки тому

      I'm doing it right now bottle jack with a piece of wood on oil pan

  • @ALYangRSX
    @ALYangRSX 4 роки тому +2

    Yup oem throwout bearing is the best of the best.

  • @kongchan916
    @kongchan916 3 роки тому +1

    Oh man this is good stuff. Idk if u scared me off but Sheesh that's alot of damn work smh. Makes me wana pay someone now lol.

  • @Zaberdutton
    @Zaberdutton Рік тому

    The one part I came to see was the only part that was skipped over and that's getting the transmission shaft back in and aligned properly...

  • @crz666
    @crz666 2 роки тому +1

    Awesome video. I will be doing my clutch this week. Thank you!!!! Subbed!!!

    • @Dear-_-Agony
      @Dear-_-Agony 2 роки тому +1

      How'd it go?!

    • @crz666
      @crz666 2 роки тому

      @@Dear-_-Agony went great. Thank you, appreciate your video!!!

  • @randywardle4406
    @randywardle4406 11 місяців тому

    Thank you! great video! What were the torque specs on the flywheel and pressure plate?

  • @gioraya9094
    @gioraya9094 Рік тому

    By any chanse you have the part # for oil seal bearing!! Thanks!

  • @jordan_.zx10r
    @jordan_.zx10r 4 роки тому +1

    Do you have a to oil the new main seal or just put it in?

  • @Nikko-zi3ti
    @Nikko-zi3ti 2 роки тому +1

    when the pilot bearing is seated should it be able to spin or no?

    • @masumoto007
      @masumoto007 2 роки тому

      Supposed to stay seated😉

  • @kasmacu9187
    @kasmacu9187 4 місяці тому

    I’m 4 years late lmao, but if anyone’s active on this video still, instead of disconnecting from where the ball joints meet the lower control arm, could I just take the bolts out that connect the strut to the brake hub and drop the subframe with the hubs still on? Is there any reason I shouldn’t do this that way? It just sounds a bit easier to me..

  • @josebenitezlopez8802
    @josebenitezlopez8802 Рік тому

    what’s the clutch alignment tool kit for?

  • @josebenitezlopez8802
    @josebenitezlopez8802 Рік тому

    where do you get all of the torque specs?

  • @yoshihd326
    @yoshihd326 2 роки тому

    Did you say 19lbft or 90lbft for the torque wrench?

  • @urielortiz3667
    @urielortiz3667 4 роки тому +4

    Why did you choose this clutch kit over the exedy? Also, can you explain why yo i replaced the pilot bushing and the throw out bearing? I’m replacing my soon and can’t find any info if those two parts are needed to be replaced while replacing the clutch

    • @jdm.dennis
      @jdm.dennis  4 роки тому +3

      I choose competition clutch because my buddy has one and it felt great. I replaced the pilot bushing and throw out bearing because over time it gets worn out. I highly recommend replacing them while you are at it or you might have to take the transmission out again. If you need those parts I would go to your local Acura dealership and get it there, it wasn’t that expensive. Also both competition and exedy are great brand I would definitely recommend either one.

    • @urielortiz3667
      @urielortiz3667 4 роки тому +2

      Dennis Behrend oh ok, thanks for clearing those things up for me definitely going to swap them out while I’m at then

    • @urielortiz3667
      @urielortiz3667 4 роки тому +2

      Dennis Behrend Thank you. I ordered and got every thing that you recommended. Definitely excited to see how it is after the swap!

    • @jordan_.zx10r
      @jordan_.zx10r 4 роки тому +1

      @@jdm.dennis is the CC TOB not good?

    • @jdm.dennis
      @jdm.dennis  4 роки тому +2

      JCBR600RR Always use factory, OEM throwout bearing. I heard from lots of other people that their competition clutch throwout bearing has failed.

  • @DropperKnows
    @DropperKnows 4 роки тому +3

    wow that oem clutch looks bad! How many miles did you have on the car before you changed it? I currently have 82k on my 2006 type s & nothing feels wrong with mine at all. Just want a lighter flywheel and stage 1 clutch

    • @Kseriessuck
      @Kseriessuck 3 роки тому +1

      Stock one isn’t really all that great tbh, im on og clutch at 110k with fbo, reflash and it’s locking me out of gear and slipping, ill be putting in an exedy stg 1 with lw flywheel

  • @dutchmenmodsandrepairs1427
    @dutchmenmodsandrepairs1427 3 роки тому

    Great video! Where did you get the clutch alignment tool? Do you have a part# for it?

  • @prcc8793
    @prcc8793 2 роки тому

    Nice video,im planning to do this soon.what brand is the flywheel and how much is weight

  • @icasualYT
    @icasualYT 6 місяців тому

    Very Informative, Great Video.

  • @bobbutler1240
    @bobbutler1240 4 роки тому +1

    Does the starter need to be removed

    • @seanneuhaus8115
      @seanneuhaus8115 3 роки тому

      No you dont

    • @keaton9541
      @keaton9541 Місяць тому

      @@seanneuhaus8115 WHAT REALLY? Ive been struggling with for past few days its in an awful spot

  • @aycarambas
    @aycarambas 4 роки тому +5

    Aw man you left out the best part how to reinstall the transmission. I used a jackstand but it was a bitch trying to line it up. Very labor intensive!

    • @droptopp3479
      @droptopp3479 4 роки тому +1

      yehh i thought the same too lol, i did mines 2 months ago and man aligning the transmission back in was a pain. Took me and 2 other ppl 1 whole hour while bench pressing tht thing cuz jack wasnt angling right.

    • @aycarambas
      @aycarambas 4 роки тому

      @@droptopp3479 Whats your secret? Any tips? I just kept wiggling with 2 people above and a jackstand underneath until it slowly lined up with the guides. Took like 30 tries. But it was such a pain no joke for a minute I thought about junking it and getting a new car.

    • @droptopp3479
      @droptopp3479 4 роки тому +2

      @@aycarambas lol well first dont mke the mistake i did, which was if trans doesnt go in then try sticking the alignment tool back in to see if it actually goes in smooth. So after like 20min it didnt work so i tried tht and saw tht the alignment wasnt too straight so i had to redo align and straighten up the middle by pilot bushing. Then after tht, we just pushed it in while hving 2 guys under the trans bench pressing it and one on top to push and align the trans. After wiggling it counter and clockwise for 10-15min it finally went in. Using cherry picker wouldve been the easiest way i see but i didnt hve one. Definitely do need 2 extra ppl to mke it easier on yourself tho. I didnt want to work on the car the next day so we had to get it in no matter what but yeh it was a pain in the ass.

    • @jdm.dennis
      @jdm.dennis  4 роки тому +1

      A G Using engine stand and Jack really help to align the transmission back in. That’s what I did!

  • @lunser9098
    @lunser9098 2 роки тому

    My clutch just shit the bed, let’s see if this will give me some insight

  • @joshuapohl2990
    @joshuapohl2990 Рік тому +1

    What did you use the Jack bar for the big breaker bar?

    • @CitiZen1.0.1
      @CitiZen1.0.1 7 місяців тому

      On the crank so it doesn't spin on the other side while he torqued the flywheel bolts. (I think)

  • @xavieromar1123
    @xavieromar1123 4 роки тому

    give me the torque specification of each of the parts?? Please

  • @ReefyBmx
    @ReefyBmx 11 місяців тому

    Lets do a rsx type s meet again.

  • @TheMigs87
    @TheMigs87 Рік тому

    Do you still have the CC Stage 1.5?

    • @keaton9541
      @keaton9541 Місяць тому

      Im putting that in now, do you have it? If so, hows it been?

  • @mckoylach1622
    @mckoylach1622 4 роки тому +1

    Nice video,bro,thanks...

  • @JeffReams
    @JeffReams 3 роки тому

    That's a nice jack you got ... I got the same one :)

  • @joel-je2bv
    @joel-je2bv 2 роки тому

    hey man, gonna start working on my rsx very soon gonna use this as reference hope i don’t fuck sum up

  • @ChiicoK3lly
    @ChiicoK3lly 2 роки тому

    Thank you

  • @C43Luis
    @C43Luis 4 роки тому +1

    Keep it up!

  • @jonathanlopez2338
    @jonathanlopez2338 2 роки тому

    you really gotta put that much grease ?

  • @masonmoua6833
    @masonmoua6833 4 роки тому +3

    Nice content

  • @papoportillo1019
    @papoportillo1019 4 роки тому

    What are the torque specs for bolting the trans back to the engine ??

  • @Mrsmith1082
    @Mrsmith1082 2 роки тому

    You can always throw that pilot bushing in a plastic bag with some lube in the deep freezer the night before and it will go in easier..because science.

  • @jimmyle4862
    @jimmyle4862 4 роки тому +1

    Nice video Dennis, what brand was your old OEM clutch kit?

    • @jdm.dennis
      @jdm.dennis  4 роки тому +1

      Yea the old one was OEM

    • @jimmyle4862
      @jimmyle4862 4 роки тому +1

      Did you have to adjust your clutch pedal for travel?

    • @jdm.dennis
      @jdm.dennis  4 роки тому +1

      Jimmy Le no I didn’t. I like low biting point on clutch.

    • @jimmyle4862
      @jimmyle4862 4 роки тому +1

      Cool, thanks man!

  • @UYC.
    @UYC. 4 роки тому

    Great job great content stay safe peace....

  • @jordan_.zx10r
    @jordan_.zx10r 4 роки тому

    Do you need to mark the subframe bolts removing it?

    • @JeffReams
      @JeffReams 3 роки тому

      The tech manual says that you are suppose to mark them, yes.

  • @Coldology
    @Coldology 3 роки тому

    Why you’re intake look like mine the same exact even the ugly ass intake filter lmao 🤣

  • @steveswanson2294
    @steveswanson2294 3 роки тому

    Dude, a claw hammer to put the pilot bearing in? Lmao

  • @kristianjon4014
    @kristianjon4014 4 роки тому +2

    First

  • @TheShangralaaaa17
    @TheShangralaaaa17 3 роки тому

    slave cylinder.....its a slave cylinder