Wow! This saved us money (we don't have) to buy a new printer. After clicking maintenance buttons on the Canon Pixma MX340 to clean, I did what you said, got in there easily with a Q tip to clean a spot I saw, and ended up cleaning the whole strip because it was so much fun! Then printed a CLEAN copy, no blank vertical lines! I am so grateful you shared this video online! :)
Thank you! This worked with getting rid of a thin blank/white line that kept showing up in the same exact area of our prints. My printer is an Epson XP-440. I looked at the clear timing strip and there was some type of clear oily looking smudge in the exact area where the line kept showing up on our prints. I used a q-tip/cotton swap and water to wipe it gently away. Before this, I would have to print on the highest/maximum print quality to make it less visible and I had wasted a lot of ink from doing so many print cleanings. I have had this problem for months. I often have to print on inkjet transfer paper to print designs for t-shirts, but they are usually small designs so I would just print on the other side of the paper, but this time I had a client's design that used the whole page. I thought I would have to get a new Epson printer to complete this t-shirt job.Thank you so much!
Thank you very much for sharing your experience. I am happy the video helped you get that problem out of the way hope you can use the printer for a long time!
Thank you so much! I was struggling with my printer all night with it printing very jaggedly. I tried cleaning all the cartridges, nozzles, and aligning the print head, etc and nothing was working. I followed your instructions on my Canon MG5320 and voila! It printed beautifully. It was such an easy fix. You saved me from a lot of frustration. I cannot express how much I appreciated this video and your step by step instructions.
Thank you for the clear description! I recently converted an Epson ET-2760 (used) to sublimation ink, using some basic info I got about ETs from UA-cam videos (LOL). And while it worked, I dripped a little ink on the timing strip. Following your instructions, I found it immediately, cleaned it, and got a perfect print! Yay for DIY!
Great tip. Fixed vertical line on a Cannon MG3650. Once you pointed out it could be the timing strip it was easy to spot the bit of dirt causing the problem. Clean with a QTip and tiny amount of window cleaner.. cleared the vertical line on very next print.
Thanks so much. I’ve been trying to sort this out for ages, cleaning, replacing cartridges etc and after watching your video, I find it was only a small bit of ink that needed cleaning off!
OH... MY... *insert favorite cuss word here... I've used them all during this problem* GOODNESS!!!!!! I have been trying to fix this damn problem for like a month! Numerous nozzle cleanings and alignments, asking geek squad, asking other tech savvy friends and YOU SAVED ME!!!! I was about to throw the whole damn printer out and just get a new one, which pissed me off because I haven't even had this printer for a year! You are amazing! Thank you so so so so much for posting this video! I'm banging my head against my desk because it was literally a 2 minute fix that has been plaguing me for a month!
Worked for me. Thank you so much! I've tried doing cleaning multiple times, then deep cleaning but none of those worked. Good thing I've came across your video. Very helpful.
Tried this on my Canon MG5750, used cotton buds and isopropyl alcohol, dried with kitchen roll paper. Worked perfectly, thanks, I've been struggling with this for about 4 months!
Great video. I have Canon Inkjet printer which had vertical lines to the right of the page. I tried this method and have no more lines! I thank you so very much for sharing this method. The only difference is that I used an earbud taped to a chop stick.
I had horizontal lines going across my pages, I used alcohol on kitchen roll to clean (very hard to get to the clear strip on a hp envy, but I managed) Instant results, pages print perfectly now. Thanks so much!
It works for me 💯💯💯! I've been trying many others from the Canon IJ Printer Assistant Tool and nothing fixed those terrible vertical lines. Really Thank U so much !!!
Thank you so much!!!! I've had vertical lines on my epson ET 2720 for over a month and no video or epson support has been able to help. I watched this video, cleaned the strip and my lines are gone!!!! 😭😭😭❤❤❤🙌🙌🙌
Thanks a lot for sharing you experience on cleaning the timing strip, I have a Canon G3012 which was giving the same problem where images or documents were having vertical lines on them. After cleaning the timing stripe suggested by you it helped resolve it.
This is the best solution among those that you need to disassemble the printer and have a syringe that I feel like will cause me more error coz I'm not sure I'll be able to do all that properly and remember to fix it all back properly. Thank you!
Thank you so much! I was about to give up on this printer and toss it but I followed what you did and the lines are gone! prior to this i had did an alignment, standard print head cleaning and a deep print head cleaning. I thought it was a goner.
WOW WOW WOW! google verticle line on inkjet printer page and found this. i had been having problems and much frustation b4 i did that trying to align etc. This was the answer and only took a minute. THANK YOU SO MUCH! Thought my printer was shot and I was going to need another. On a tight budget so that wasn't good.
thank you so much for this video, may canon g1010 got vertical lines , I done all the cleaning, but it does not work, only your advice works for my printer, thank you so much for sharing this info. My printer work best again without any vertical lines.
Thank you brother, I am from India i was trying to fix the thin line for last 5-6 hours.... I thought it was alignment problem. Wasted almost 40-50 pages 😂 But When i saw your video and just clean that little film it's started working fine Thanku ✌
hahahha been worried for a night because my printer have a problem with the 'white' linee. so i tried this method and wipe the film using cotton swabs and it works! i also notice there's a white grease on my film exactly where the faulty lines occur so i wipe on that spot. thankyou for the method!
My newly purchased...well used should I rather say, Designjet 4000 has a few missing lines on the encoder strip. This video reminded me I have to replace that too.
This saved me. thank you so much. At first I had a stuck paper, so I fixed that, then it kept smudging so I tried to do deep clean and ended up filling up my ink waste sponge thing so replaced that and it still didn't work. I'm so happy I found this video T_T
Great. Cleaned the strip and this worked for me.. Thanks a lot.. . But now I have a problem where the print head assy keeps hitting the ribs of the bottom plate while moving to and fro and leaves a black smears/smudges along the length of the paper aligning exactly with the ribs of the bottom plate... Unable to figure our/resolve this problem..
Hi. I'm glad you got one problem out of the way. Seems to me that when you were cleaning the strip, you may have misplaced something that the bottom like a foam padding. Use flashlight to inspect he inside of the printer and see if anything is out of place.
I have a Canon Pixma MX420 printer. It is having horizontal lines/streaks across my documents whenever I print something. Would it be related to what you are doing in the video. I've put in two new cartridges black and color in them. The horizontal lines are still showing. I also did all the cleaning from settings of the printer. It didn't fix it. So frustrating. Please help on what to do.
This video is not the solution to your problem. You need to manually clean a cartridge most likely. See this video: m.ua-cam.com/video/a1cKz1TxFGI/v-deo.html You should instantly see printing improvement after you do that. That us for horizontal lines.
Thank you very much! Got a new Canon iP8750 which had a timing issue. It showed colored, vertical lines in the middle, the cleaning test looked just like your faulty ones and the prints were blurry. Each streak moved a bit to the right. With a bit of cleaning following your tips the prints are now beautiful. Thanks again
Yes this was just the advice I needed to solve the problem - thank you sir. A big thumbs up and a new subscriber. Keep up the good work - straight forward and practical informaion
I did this and found 3 black dots on the strip. Swabbed it and removed those black dots but it left transparent dots instead. Praying that the print will be normal at last, and I found out that it didn't work. It made me conclude that I need to buy a new strip. 😅
Worked a treat on my Canon G3501 printer! Luckily the timing strip is easy to get to on my model when the inspection cover is lifted . I just used cotton buds with surgical spirit! Top Banana :-)
nozzle and alignment checks print out perfectly but printing a regular shipping label and its crap. took almost all my ink too. im over it. gonna toss out this printer and go with a thermal printer for my labels. any recommendations or anything i should know about thermal printers?
@@tee228 I have a Zebra 2844 for my labels. Its an older model and works for me just great. I honestly do not know much about thermal printers since this is the only one I have had. Good thing is that I never have to buy ink. If you have a FedEx account, they will send free labels too.
@@303electronics nice! buying ink and wasting ink just to get your printer working again is absolutely ridiculous. thanks for the recommendations and for the quick replies! appreciate it
Hi. No, the thin blue line is caused by dirty rollers. You can do a roller cleaning on your printer by going into maintenance settings on your printer and select "roller cleaning." Most canon inkjets will have that option. You may also try cleaning manually. When you open the printer, you should see where excess ink may have accumulated. Tiny rollers are usually white in color and any excess ink will be visible. I usually spray a bit of window cleaner and let a few pages pass to take away the ink. Try the automatic roller cleaning first.
Wow! This saved us money (we don't have) to buy a new printer. After clicking maintenance buttons on the Canon Pixma MX340 to clean, I did what you said, got in there easily with a Q tip to clean a spot I saw, and ended up cleaning the whole strip because it was so much fun! Then printed a CLEAN copy, no blank vertical lines! I am so grateful you shared this video online! :)
Thanks for sharing your experience. I'm glad you got it fixed! Have a great day!
Same here. Thank you so much
Thank you! This worked with getting rid of a thin blank/white line that kept showing up in the same exact area of our prints. My printer is an Epson XP-440. I looked at the clear timing strip and there was some type of clear oily looking smudge in the exact area where the line kept showing up on our prints. I used a q-tip/cotton swap and water to wipe it gently away. Before this, I would have to print on the highest/maximum print quality to make it less visible and I had wasted a lot of ink from doing so many print cleanings. I have had this problem for months. I often have to print on inkjet transfer paper to print designs for t-shirts, but they are usually small designs so I would just print on the other side of the paper, but this time I had a client's design that used the whole page. I thought I would have to get a new Epson printer to complete this t-shirt job.Thank you so much!
Thank you very much for sharing your experience. I am happy the video helped you get that problem out of the way hope you can use the printer for a long time!
Thank you so much! I was struggling with my printer all night with it printing very jaggedly. I tried cleaning all the cartridges, nozzles, and aligning the print head, etc and nothing was working. I followed your instructions on my Canon MG5320 and voila! It printed beautifully. It was such an easy fix. You saved me from a lot of frustration. I cannot express how much I appreciated this video and your step by step instructions.
Thank you! Very encouraging feedback! I'm very glad you were able to fix your printer. It is a great feeling, I know. Have a great weekend!
Thank you for the clear description! I recently converted an Epson ET-2760 (used) to sublimation ink, using some basic info I got about ETs from UA-cam videos (LOL). And while it worked, I dripped a little ink on the timing strip. Following your instructions, I found it immediately, cleaned it, and got a perfect print! Yay for DIY!
That's great! Thanks for sharing. Have a great evening!
Great tip. Fixed vertical line on a Cannon MG3650. Once you pointed out it could be the timing strip it was easy to spot the bit of dirt causing the problem. Clean with a QTip and tiny amount of window cleaner.. cleared the vertical line on very next print.
That's great! Thank you for the update. Enjoy your day!
2024 and this video is the 1 that fixed my issue. Idk what and how that stuff got on that strip but windex wipe took care of it.
I'm glad it did. Thank you very much for sharing. Have a great day!
Thanks so much. I’ve been trying to sort this out for ages, cleaning, replacing cartridges etc and after watching your video, I find it was only a small bit of ink that needed cleaning off!
You're welcome! Thanks for sharing!
OH... MY... *insert favorite cuss word here... I've used them all during this problem* GOODNESS!!!!!! I have been trying to fix this damn problem for like a month! Numerous nozzle cleanings and alignments, asking geek squad, asking other tech savvy friends and YOU SAVED ME!!!! I was about to throw the whole damn printer out and just get a new one, which pissed me off because I haven't even had this printer for a year! You are amazing! Thank you so so so so much for posting this video! I'm banging my head against my desk because it was literally a 2 minute fix that has been plaguing me for a month!
I'm glad you got it fixed!!!🙂🙂🙂 Thanks for the feedback. Have a great day!
Worked for me. Thank you so much! I've tried doing cleaning multiple times, then deep cleaning but none of those worked. Good thing I've came across your video. Very helpful.
Glad it helped! Have a great day!
Tried this on my Canon MG5750, used cotton buds and isopropyl alcohol, dried with kitchen roll paper. Worked perfectly, thanks, I've been struggling with this for about 4 months!
Great work, I'm glad you got it fixed. Thank you for sharing!
Great video. I have Canon Inkjet printer which had vertical lines to the right of the page. I tried this method and have no more lines! I thank you so very much for sharing this method.
The only difference is that I used an earbud taped to a chop stick.
Awesome! Thanks for sharing. Have a great day!
Thank you so much! I’ve been trying to figure this problem out for months and considered bringing it for repair. But it’s okay now! THANK YOU!
You're welcome! I'm glad you got it fixed. Thanks for the feedback. Have a great day!
WOW thank you so much! White vertical lines went away! It worked for me after trying to figure it out on my own. Thanks once again!
You're welcome! I'm glad you got it fixed. Thanks for the feedback.
Top job, saved me entering the printer throwing Olympics!!!
Haha🤣🤣🤣. Thanks for reply. Have a great day!
I had horizontal lines going across my pages, I used alcohol on kitchen roll to clean (very hard to get to the clear strip on a hp envy, but I managed) Instant results, pages print perfectly now. Thanks so much!
It works for me 💯💯💯! I've been trying many others from the Canon IJ Printer Assistant Tool and nothing fixed those terrible vertical lines. Really Thank U so much !!!
You're welcome. I'm glad it worked for you. Have a great day!
Worked nicely on canon mx475. Couldn't find solution elsewhere nit even from canon themselves. The putting swabs on pen with elastic is a great tip.
Glad it worked for you! Thanks for the feedback. Have a great day!
Thank you so much. I almost cried today but after watching this video the problem got solved.
Thanks!!! My Canon G3010 has had a white line on the page for weeks but now simply taking a mediswab to this strip has fixed it
Thank you so much!!!! I've had vertical lines on my epson ET 2720 for over a month and no video or epson support has been able to help. I watched this video, cleaned the strip and my lines are gone!!!! 😭😭😭❤❤❤🙌🙌🙌
That's awesome! Great job! thanks for sharing!
Thanks a lot for sharing you experience on cleaning the timing strip, I have a Canon G3012 which was giving the same problem where images or documents were having vertical lines on them. After cleaning the timing stripe suggested by you it helped resolve it.
This is the best solution among those that you need to disassemble the printer and have a syringe that I feel like will cause me more error coz I'm not sure I'll be able to do all that properly and remember to fix it all back properly. Thank you!
Thanks for your input! Have a great weekend!
Thank you so much! I was about to give up on this printer and toss it but I followed what you did and the lines are gone! prior to this i had did an alignment, standard print head cleaning and a deep print head cleaning. I thought it was a goner.
I'm glad you got it fixed! Thanks for the feedback! Have a great day!
WOW WOW WOW! google verticle line on inkjet printer page and found this. i had been having problems and much frustation b4 i did that trying to align etc. This was the answer and only took a minute. THANK YOU SO MUCH! Thought my printer was shot and I was going to need another. On a tight budget so that wasn't good.
I am very glad you got this resolved. Thank you for your feedback. Have a great day!
thank you so much for this video, may canon g1010 got vertical lines , I done all the cleaning, but it does not work, only your advice works for my printer, thank you so much for sharing this info. My printer work best again without any vertical lines.
Finally today i got the exact answer for this problem after experiencing it months. Thanks bro 🙏 🙌
You're welcome! Glad you got it fixed. Thanks for the feedback 😀
Bless you brother ,if I had taken this to the repair shop they would've given unfair charges for the repair.
I'm glad you got it fixed yourself. Thanks for the comment. Have a great weekend!
Worked 1st time on a Canon TR4560. Used an ear bud and isopropyl alcohol. Thank you very much.
Thank you brother, I am from India i was trying to fix the thin line for last 5-6 hours.... I thought it was alignment problem. Wasted almost 40-50 pages 😂
But
When i saw your video and just clean that little film it's started working fine
Thanku ✌
FANTASTIC.. It worked after 2 days fighting with this printer (and wife...) :)
Excellent. One canon fixed by cleaning the timing strip. Didn't know such a thing existed. And how does it get so dirty? Not a good design.
thank you soooo much!!! I cleaned it with windex and paper towel. IT IS LIKE A NEW PRINTER
You're welcome! Thanks for sharing. Have a great day!
woah! thats so genius! you saved my epson printer! thank you so much!
You're welcome! I'm glad you got it fixed. Have a great day!
Thank you so much, that was great. Never would have found that without your video!
Glad it helped!
hahahha been worried for a night because my printer have a problem with the 'white' linee. so i tried this method and wipe the film using cotton swabs and it works! i also notice there's a white grease on my film exactly where the faulty lines occur so i wipe on that spot. thankyou for the method!
Great TUT. Fixed mine. Also the doubling letters fixed by this.
My newly purchased...well used should I rather say, Designjet 4000 has a few missing lines on the encoder strip. This video reminded me I have to replace that too.
Thank you so much!!!!
Saved me from buying a new one
The problem I have been enduring is just a cotton swab away all along. . Thank you x100🎉
You're welcome! I appreciate your feedback. Have a great day!
thanks dude. finally found the real solution. damn wasting my money when buying new printhead but the problem still occurs
Glad you got it fixed! Have a great weekend!
Many many thanks , wsas about to buy new printer but these simple steps fixed my issue , well done , much appreciated
this actually helped me!!! love you man! may god bless you
THANK YOU SO MUCH!!! had the same issue on my Ip8720 and it did the trick. i NEVER would have known. thank you!!!!
Thanks for sharing. I'm glad you got it fixed. Have a great day!
Wow wow wow just wow...
this is a life saver! Canan mx 350 here.
Thanks for sharing. Have a great weekend!
Thank you so much for this video! It saved my Pixma G610!
This saved me. thank you so much. At first I had a stuck paper, so I fixed that, then it kept smudging so I tried to do deep clean and ended up filling up my ink waste sponge thing so replaced that and it still didn't work. I'm so happy I found this video T_T
And I'm glad you got your printer fixed. Thank you so much for sharing. Have a great day!
worked on my Canon G2010! Thanks bro
Wow this is working on My Pixma MP280 THANKS MAN!!!
thanks a lot sir. finally this video solved my printer.
Work!! Canon mg 2130 thanks a lot for this video. So helpful
You're welcome! Thanks for the feedback! Have a great weekend!
This solution is so simple, but powerfull. Thank you were much!
Fantastic Canon Pro -1000 worked a treat massive thanks
Excellent fix. Thank you.
You're welcome! Thanks for the feedback. Have a great day!
Thank you. I tried everything and this was the last thing that worked!! THANK YOU
You're welcome!
Great. Cleaned the strip and this worked for me.. Thanks a lot.. . But now I have a problem where the print head assy keeps hitting the ribs of the bottom plate while moving to and fro and leaves a black smears/smudges along the length of the paper aligning exactly with the ribs of the bottom plate... Unable to figure our/resolve this problem..
Hi. I'm glad you got one problem out of the way. Seems to me that when you were cleaning the strip, you may have misplaced something that the bottom like a foam padding. Use flashlight to inspect he inside of the printer and see if anything is out of place.
Thank you so much. Save my day. Thank you for shared!! God Bless you
You're welcome! Blessings to you as well!
I have a Canon Pixma MX420 printer. It is having horizontal lines/streaks across my documents whenever I print something. Would it be related to what you are doing in the video. I've put in two new cartridges black and color in them. The horizontal lines are still showing. I also did all the cleaning from settings of the printer. It didn't fix it. So frustrating. Please help on what to do.
This video is not the solution to your problem. You need to manually clean a cartridge most likely. See this video:
m.ua-cam.com/video/a1cKz1TxFGI/v-deo.html
You should instantly see printing improvement after you do that. That us for horizontal lines.
@@303electronics But I just purchased two new cartridges black and color
Did it get fixed ? I'm stuck on the same problem
@@anjali1923 No. still have lines on my documents printing
@@Arsenal64 :(
hi i just wanna know why my printer print horizontal white line in the nozel check patren. I changed the ink cartridge but the problem not fixed
Thank you so much. Very helpful
You're welcome! Glad it helped. Have a great weekend!
Amazing! Thanks for helping me solving this issue!!!!!
Happy to help!
You are a genius!! This worked! Thank you so much.
You're welcome! Thanks for the feedback! I'm glad it worked for you. Have a great day!
Thanks for the detailed views and how to steps. I followed your instructions and it worked.
Thank you! Saved my life and sanity! 🙏
THANK YOU SO MUCH I WASTED SO MUCH NICE PAPER BUT NO MORE!!
Thank you this helped a lot
I'm glad it did. You're welcome! Have a great day!
Thank you so much, saving a ton because of you
Glad to hear! Have a great day!
Amazing! This resolved my issue with Canon G1010. Thank you!
You're welcome! Glad it helped!
It worked for me! Canon printer I found on the side of the road...
That's awesome! Thanks for sharing. Have a great day!
Thank you very much! Got a new Canon iP8750 which had a timing issue. It showed colored, vertical lines in the middle, the cleaning test looked just like your faulty ones and the prints were blurry. Each streak moved a bit to the right. With a bit of cleaning following your tips the prints are now beautiful. Thanks again
TQ SO MUCH! THIS HELPED ME A LOT!!
Resolved an issue in my G2010 canon ... Thank you very much 🥰
Great to hear! Have a great day!
WAAAAH THANK YOU SO MUCH FOR THIS VIDEO, IT WORKED ON MY PRINTER🕺
That's awesome! Thanks for sharing. Have a great day!
Thank you so much this worked perfectly the first time!
Thanks. Glad it did. Have a great day!
Hi sir
My Canon G570 printer giving dark lines on the blue color backdrop. Kindly help.
My friend did it with Canon PIXMA MG2540S.
And it didn't work out.
What do you advise me to do?
Thank you so much for this. Big help for me😊😊
Yes this was just the advice I needed to solve the problem - thank you sir. A big thumbs up and a new subscriber. Keep up the good work - straight forward and practical informaion
What does 752-800 pages below the paper mean? And ver 2 .000?
Yes, it worked. Thank you that was a good tutorial.
Thanks for the feedback! Have a great day!
Was exactly what I needed!! Thank you!
Mine has horizontal line instead of vertical line. So can I do the same?
Thank you so much.works on my g2010.
That's great! Thanks for sharing! Have a great day!
I did this and found 3 black dots on the strip. Swabbed it and removed those black dots but it left transparent dots instead. Praying that the print will be normal at last, and I found out that it didn't work. It made me conclude that I need to buy a new strip. 😅
thanks!a quick fix👍
You're welcome! Thank you very much for the feedback. Have a great day!
yup. it works. thank you very much
Worked a treat on my Canon G3501 printer! Luckily the timing strip is easy to get to on my model when the inspection cover is lifted . I just used cotton buds with surgical spirit! Top Banana :-)
thank you so much bro ur a life saver
thank you so much sir.. it helps a lot
I'm glad it was helpful. Thanks for the feedback. Have a great day!
Thank you.. it helps a lot..
how do you get rid of the horizontal white lines like you have? That's whats going on with me. Thanks a lot :) Liked and subbed
Does it work on epson L130
my printer problem is it prints purple lines, does this method helps?
instead of a white strip, i have a whole white block 2 inches wide going down through whatever im printing. any tips? my timing strip is clean.
Hi. When you print nozzle check pattern, does it show which color has the problem. My assumption is that the black color nozzle needs cleaning.
nozzle and alignment checks print out perfectly but printing a regular shipping label and its crap. took almost all my ink too. im over it. gonna toss out this printer and go with a thermal printer for my labels. any recommendations or anything i should know about thermal printers?
@@tee228 I have a Zebra 2844 for my labels. Its an older model and works for me just great. I honestly do not know much about thermal printers since this is the only one I have had. Good thing is that I never have to buy ink. If you have a FedEx account, they will send free labels too.
@@303electronics nice! buying ink and wasting ink just to get your printer working again is absolutely ridiculous. thanks for the recommendations and for the quick replies! appreciate it
You helped me a lot. Thank you
My pleasure! Have a great day!
شكرا لك.
Thanks
You're welcome! Have a great day!
Thank you! it worked like a charm =D
That's great! Thank you for sharing. Have a great day!!!!
Thank you so much!
I'm gonna use chopsticks from food last night and alcohol pads from work 😁😂🤗
Thank you sir.
hm...my line is blue and thin, does this help get rid of any line? :o
Hi. No, the thin blue line is caused by dirty rollers. You can do a roller cleaning on your printer by going into maintenance settings on your printer and select "roller cleaning." Most canon inkjets will have that option. You may also try cleaning manually. When you open the printer, you should see where excess ink may have accumulated. Tiny rollers are usually white in color and any excess ink will be visible. I usually spray a bit of window cleaner and let a few pages pass to take away the ink. Try the automatic roller cleaning first.
@@303electronics ok im a dummy and idk how to do that so imma ask my dad for help xD thank u! :D