Another excellent and beautiful addition to the series! Your process is very unique and effective in presenting a mood to the print. Thank you for sharing this!
Wonderful prints ..Thankyou so much ..I am addicted to watching you work and after years of Gel printing I have never seen work that has inspired me so much 😮 ..just waiting for back to ease off and I am itching to get My Gel plate out .. 😊
Hi! I made a frame of thin wooden slats where the plate fits inside. The frame is about half as thick as the gelli plate. On the outside I glued two L-shaped plastic corner trims as guides which ensures that the image is placed correctly on the sheet every time.
Love your beautiful atmospheric print 🙂Quick question: Is your DIY frame exactly the same thickness as the gel plate? Or is it fractionally thinner? The brayer doesn't seem to leave much ink on it. Appreciate any advice in making my own frame/s. Thank you!
Hi Angie! The frame surrounding the gel plate is about half the thickness of the gel plate. Otherwise, the brayer would have touched the frame when pressed down and rolled over the edges.
Yes, the gelli plate is about 5 mm higher above the frame. But still I often get paint outside the picture, irritating! Maybe raise the plate a few mm more.
Thank you very much! I used Black and Primary Red Graduate from Daler Rowney, Titanium White from Panduro and Cadmium Yellow Basic from Liquitex. But I am sure almost any acrylic paint will be fine. 🌹
@@ericmartin4818 Yes, that can be a problem. But not so much when monoprinting on gelli plate, I think. When I paint ordinary paintings with acrylic, I often use «Jackson's Acrylic Retarder Medium» to increase drying time.
Tusen takk for at du deler så raust av teknikker fra din vakre kunst. Monotypi er noe jeg lenge har ønsket utforske. Akvarell, maleri og skulptur er det jeg mest har erfaring med. Ved å se på dine gode og inspirerende videoer ønsker jeg å spørre om hvilket papir du bruker til dine monotypier? Kan man f.eks bruke "hot pressed" akvarellpapir?
Hei, og takk for fine ord! Når det gjelder papir må man bare prøve seg fram. Om hot pressed akvarellpapir kan brukes vet jeg ikke før jeg har prøvd... papiret må ikke suge til seg så mye fuktighet, da krøller det seg på gelliplata og kan revne når det dras av.
I just love your process. These are wonderful poetic images. Fabulous work. Thank you for sharing. Pam
Another excellent and beautiful addition to the series! Your process is very unique and effective in presenting a mood to the print. Thank you for sharing this!
Thank you very much for your nice words, Bob! 🌹
Your work and your demos are just wonderful! Thank you so much.
Thank you very much! 🌹
This is what I dream of being able to creat one day. Absolutely moving!!!
Wonderful prints ..Thankyou so much ..I am addicted to watching you work and after years of Gel printing I have never seen work that has inspired me so much 😮 ..just waiting for back to ease off and I am itching to get My Gel plate out .. 😊
Thank you nvery much, Cally!
Amazing to watch - beautiful result.
Thank you, glad you like it Julie! 🌹
That was so fascinating and satisfying to watch. Thank you for sharing sharing!
Thank you very much, Lisa! 🌹
Bloody marvellous 👏 👏 👏
Hehe, thank you very much, Suzi! 🌹
Thank you! Very inspirational.
Your technique is complex to follow. Trying to learn the steps a bit as the effects you get are wonderful. Thank you so much for sharing.
Super👍👍👍👍👍
very cool and super inspiring - thank you so much for sharing!!
Beautiful work! 👏💕
Thank you very much, Carole! 🌹
Outstanding!
this is beautiful...👏💗
Thank you very much! 🌹
Glimrende! Skikkelig inspirerende. 🙏🙏
Amazing❤
Great work! Can you share ‘blueprints’ to you gelle guide & paper holder guide? Thanks and Happy 2024!
Hi! I made a frame of thin wooden slats where the plate fits inside. The frame is about half as thick as the gelli plate. On the outside I glued two L-shaped plastic corner trims as guides which ensures that the image is placed correctly on the sheet every time.
Love your beautiful atmospheric print 🙂Quick question: Is your DIY frame exactly the same thickness as the gel plate? Or is it fractionally thinner? The brayer doesn't seem to leave much ink on it. Appreciate any advice in making my own frame/s. Thank you!
Hi Angie! The frame surrounding the gel plate is about half the thickness of the gel plate. Otherwise, the brayer would have touched the frame when pressed down and rolled over the edges.
@@dag_rottereng Thanks! Your work has inspired me to get back into printmaking 🙂
brilliant ! is the gelli slightly higher than the frame? how do you avoid contaminating the paper from the outer square frame "dirt" ?
Yes, the gelli plate is about 5 mm higher above the frame. But still I often get paint outside the picture, irritating! Maybe raise the plate a few mm more.
Fantastisk Flott🚀💃🌈🌞
Tusen takk! 🌹
Superbe, j'adore vos travaux. Quelle peinture utilisez vous ? Merci
Thank you very much! I used Black and Primary Red Graduate from Daler Rowney, Titanium White from Panduro and Cadmium Yellow Basic from Liquitex. But I am sure almost any acrylic paint will be fine. 🌹
@@dag_rotterengThank you so much. Sometimes acrylic dries too quickly.
that's my problem.
@@ericmartin4818 Yes, that can be a problem. But not so much when monoprinting on gelli plate, I think. When I paint ordinary paintings with acrylic, I often use «Jackson's Acrylic Retarder Medium» to increase drying time.
@@dag_rotterengUn grand merci pour votre conseil. Encore bravo pour votre travail très inspirant. Bonne suite artistique !
J'admire votre technique. Quel type de peinture utilisez-vous ? merci pour votre répnse.
J'utilise de la peinture acrylique ordinaire, pas de marques spéciales.
Top!
Thank you very much, Agnès! 🌹
Fantastic ! What is « Blue print » paper like ? Is it kind of Watercolor paper ?
It's more like standard copy paper, bur thicker.
@@dag_rottereng thank you !
Tusen takk for at du deler så raust av teknikker fra din vakre kunst. Monotypi er noe jeg lenge har ønsket utforske. Akvarell, maleri og skulptur er det jeg mest har erfaring med. Ved å se på dine gode og inspirerende videoer ønsker jeg å spørre om hvilket papir du bruker til dine monotypier? Kan man f.eks bruke "hot pressed" akvarellpapir?
Hei, og takk for fine ord! Når det gjelder papir må man bare prøve seg fram. Om hot pressed akvarellpapir kan brukes vet jeg ikke før jeg har prøvd... papiret må ikke suge til seg så mye fuktighet, da krøller det seg på gelliplata og kan revne når det dras av.
What type/brand of paper is that Blue Pad that you are using?
The paper is like copy paper, but thicker: 170 gsm
@@dag_rottereng thanks!