projectXJ: 97-01 Jeep Cherokee (XJ) full headliner upholstery refurbishment (with upgrades)
Вставка
- Опубліковано 2 жов 2024
- Today on Workshop Quick Takes (wqt): Dirty and sagging headliners are an aggravation on any older vehicle, especially if it was smoked in, detailed too frequently, or just sat outside in the hot sun. Re-gluing the old fabric back to the backer surface is a temporary solution but usually looks bad, because the real culprit is a bonded foam layer that gradually disintegrates.
Join us in our 2000 Jeep Cherokee XJ as we provide a detailed tutorial on pulling the headliner fabric, sourcing a few materials, cleaning off the rotted upholstery, and fitting and trimming all-new fabric. Result? A refurbished unit that's almost as good as new, in the color of our choice. And the materials are affordable if you're willing to put in the time.
Part 2 -- sun visors & soundbar: • projectXJ: 97-01 Jeep ...
***********
All trademarks used in this production are and remain the property of their respective owners. All original content © 2022 Aaron Vienot, dba aaronv.net & avey productions. Published on UA-cam under the standard UA-cam license.
"Funny Song" courtesy of Bensound.com.
"Thinking about the Universe" by Nat Keefe & Beatmower, "Dude, where's my Horse?" by Nat Keefe & the Bow Ties, and "Inevitable" by Diamond Ortiz courtesy of the UA-cam Audio Library.
"Cali" by Wataboi and "Winter Afternoon" by Catosphere courtesy of Pixabay.
Additional sound effects courtesy of Freesound.org.
This production may contain tips, tricks, and techniques that are unsafe for your application or flat out illegal to replicate in your country of residence. Use this information at your own risk.
That turned out great.
I did my 2000 XJ back in 2016 I thought it was pretty easy and it came out looking great. I used the same kind of fabric the Jeep had and I did not have any problems around the back sound bar. Also a wire brush works great to get the old foam off. I still have the Jeep and the headliner still looks great. Your videos are very good keep it up!
Good call on the wire brush! Pinning this one so that others hopefully see it. That was one of the few tools I didn't think about at the time.
Wow. I used a soft brush to get the old foam layer off. Took me like 5 minutes.... Lol
I just brushed it to the middle and shop vac'd it all up.
Also the rear where the speaker section is very difficult like you said. We started there and worked forward.
One tip with getting off the old foam is use some sort of large brush.
Always love watching your content and use the info on every XJ project I do - THANK YOU! One trick for removing the old foam from the headliner was a nylon brush attachment for a drill. Didn't take a lot of time at all
A upholstry cleaning brush on a drill will get the naaty foam off in about 20 mins.
How has it held up over the last year?
Almost 3 years, in fact, the work shown in the video was mostly done in early 2021. It has held up well other than a couple minor lift points that have not spread, although I do have a carport and it doesn't bake as hard in the summer. In the future I would rely entirely on 3M High-Strength 90 adhesive. In early '21 all spray adhesives were subject to random pandemic shortages and I had to use a grab bag of types and brands.
@@aaronvienot Nice, awesome work!!
stiff hand brush gets rid of foam extremely fast
Yup, good call. I pinned a previous commenter who noted that a wire brush would be ideal.
Great job, looking forward to the next one 😊
Nearly done editing part 2, should be up early next week!
Aaron , how did you get those rear split seats with headrests?????
The full set is from a ZJ Grand Cherokee. The fronts bolt to the XJ chair rails, but the rear required significant customization.
Love me some flame-laminated tricot...
I should have known you would remember the correct name for that fabric :-)