IM608 PRO Training - How To Do An All Keys Lost On A 2010 Jeep Grand Cherokee
Вставка
- Опубліковано 13 жов 2024
- Hey Guys,
This is Curtis your Autel diagnostic consulting here with another im608 training. Today I am going to cover how to do an all key slot scenario on a 2010 Jeep Cherokee. But there is a slight catch! This vehicle has an underlying condition that will not allow the remotes to work. By the of this presentation, you will learn the following
Tools and equipment necessary to do this procedure.
Commonly used terms associated with this vehicle
The different immo systems in Chrysler vehicles
Step by step instructions on how to do an all keys lost
What to do if the remote function does not work after keys are coded to a vehicle ( B1A79 error code)
I hope you enjoy it!
PS
Go to auteltech.co.za for a diagnostic tool consultation!
#JeepGrandCherokee #KeysLost2010 #IM608PRO
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Hyyyyy dear brother I've done AKL with my im508 and it was so easy i though what he's doing but when i watched it all i was shocked.
The only reason i always watch your videos is coz i trust you %100.
Thanks again.
Your kind help and assistance on my humble request will be highly appreciated with high levels of gratitude
Nice keeping simple
Thanks for your sharing your knowledge
Great video! Much appreciated.
Another great video from Curtis. I alway learn as I am new to Auto Locksmithing. What I realised since I have started doing this job (about 9 months ago) we must learn not only how to program keys but also how the key/remote systems work on each and every car. By the way, I own the IM508. There are times when you program a key and the remote does not work from a distance but it works when you are by the car. The first thing you'll check is the key fob battery and when you find out that the battery is good, then you must be able to investigate further. I know this is an electricians job but it looks bad when you tell the customer that the vehicle has a problem and you cannot fix it. So now, I have started to learn how the electrical systems work as well. This is a must for all of us locksmiths. I just thought to share my thought. Thanks Curtis for sharing your knowledge. Take care!!!
I actually think the most important thing about this job is knowing how to recover things when it goes wrong! ;-)
Hi, nice to see you again... I wonder if Im608 pro, can handle Toyota Rush 2016 AKL case... thanks in advance and grateful for sharing your experience and knowledge
I have a question,if the im508 plus the xp400 pro is meant to give you the same immo capabilities as the im608,why do i often see the im608 being used with the j2534?What part does the j2534 play in the key programming?I never see anyone use the j2534 with the im508!
The one I'm working on is a 2011 Jeep Grand Cherokee Laredo with a Push Start All keys lost it won't go into ACC to read the Ecm.
For remote start to work sometimes you have to drive the car for a few miles over 30mph and then try to remote start it should work.
So I got the im608 which is a great tool BUT can not pull pin on 2000 to 2004 cherokee need to pay someone to get the pin by vin number. Then a 2009 saab 9-3 sport add key with a working key no good even though it says it can over obd2, you can NOT get them pin to add key (good luck on getting the pin for saab ) 2012 Subaru remote programming failed add key ok no remote add even with remote pin code. So any suggestions on these cases. Thank you
What I don't understand is this scenario is how can you be turning the switch on and off if all keys are lost? Did you just decide to choose the ALL KEYS LOST selection to erase the current keys and re program for a new key? If you really had no key to start with wouldn't the procedure be different than the one you went through? I do appreciate the diagnostic function of the 608. Could you have done the same with a 508?
HI Cameron. Ill try to explain the scenario. The customer lost all of her keys. My client " The locksmith" purchased a new key . After we scanned the vehicle we clicked " all keys lost " to start the key learning sequence. This sequenced erased the previous keys that was stored and added they need key that my client purchased. The car started but the remote functions did not work. Thats when I went to the diagnostic menu and when to "active test" . This woke up the unit and the remotes started to work. does this make sense? PS you can use the im508 for this process
@@AutelConsultancy ok thanks. Your videos are very helpful
Can you do a video on a Bentley Continental 2007 all keys Lost?
Does this applies for higher models
I miss you curtis
We miss you my friend
If you don’t have 608 and you have a 508 can you do the same thing
Hi mate from Australia, what would be the best scan tool for my chrysler voyager 2.8 crd 2013 , diagnostic key programming ect ect .$500-$1000 budget approx .Regards James from Australia.
HI Aki, I would have to diagnose you properly. If your serious and want 100% clarity go to www.auteltech.co.za and book the diagnostic tool consultation. Thanks!
How can we change jeep ESL?
Hi bro can you help me solve some problem, I was trying to program smart key to 2015 Jeep Cherokee all key lost, but I was not able to do the job done the central lock system is not working for car lock and unlock is not working I cut the emergency key to turn the drive door to open the central lock but it doesn't open and the alarm of the car is not off
Where and how i can buy the autel im608 pro im in france?
Hi, is there benefit of having the APB112 and G-box2 with the xp400 pro ? Or it was something for the xp400 standard ?
Hello, You will need those tools to do all key lost scenarios etc. Those accessories solve different problems unrelated to the xp400 and the xp400 pro.
Hi, I’ve got a stupid question, if all keys lost, how I’m going to switch the ignition on to connect the tool ?
When you purchase the replacement keys you can put the ignition in position 1. Other times you may have to turn on the hazard light depending on the vehicle.
👍👍👍🌷🌷🌷
I want to by a very good scanner diagnosis tool which is within my budget and l need your help to select for me the best scanner and programming and coding tool and l want you yo sell to me one whoch is the best within my budget for the year 2021-2022
Requesting for your contacts for easy communications and getting in touch and along on my humble request
Want you to sell to me a good scanner chief