Nice man. That's going to be my next upgrade. I have a 2012 C70. I have Eight8fab downpipe, turbosmart cbv, IPD silicone hoses since they were the cheapest at the time and they'll work with the DO88. Had to take off the bumper to get one on didn't realize that I should've done both the hoses and the intercooler at the same time.
@@KYRGarage I just got the Turbosmart shortie not the dual port one so it doesn't add any noise really. I got it mainly because I didn't want the original to fail under more boost from a Hilton tune. The K&N or IPD air filter gives enough of a blow off noise for me. The IPD filter is actually better and louder than the K&N. You might have to hit the MAF with MAF cleaner every once in a while though.
@@willriley1619 Yeah I have a kn filter on the elevate intake, and it already makes a lot of blow off noise for me. I don't want it to get louder tbh, but the shortie sounds like a good idea since you are right. Just taking out potential failures
Great vid. Thinking about doing the same upgrade on my C30 too. Heat soak is NOTICEABLY bad in triple degree temps. Ended up with a bad overheat and a blown head gasket this summer. Wonder if the intercooler would've helped. Thanks for sharing your experience!
it's completely in the way, you can cut it out and try to fit it well, but ur gunna cut most of it anyways. Also airflow wise since its wider and bigger (pause) its gunna gulp all that air
Just bought one of these and I'm concerned about the heat soak so I'm thinking this will help with reliability on the c30 to really make it a daily driver
@@KYRGarage I'm also looking at doing a upgrade to the engine oil cooler block. I see people saying to take the ones off a ford focus RS engine that are bigger and it will just bolt on to the volvo T5 engine
@@christianhudspeth3338 yes I believe that is true, im not 100% sure on that since I havent been looking into it that much. I did see that airtec makes a full oil cooler kit that seems very attractive to me!!!
@@KYRGarage thanks for your reply I’m going to tackle this DIY next Monday and was going over DO88 instruction sheet and realize they did it on a V50 not a C30 so the bumper design is different and the tab trimmed step doesn’t apply to post face lift C30
Nice man. That's going to be my next upgrade. I have a 2012 C70. I have Eight8fab downpipe, turbosmart cbv, IPD silicone hoses since they were the cheapest at the time and they'll work with the DO88. Had to take off the bumper to get one on didn't realize that I should've done both the hoses and the intercooler at the same time.
Sounds like a great combo!!! that car is going to boogey hard!!!! I cant wait to get this tune and make a video on it ;)
how was the cbv? I havent done it because I thought it would be too loud and you can hear it through the dashboard
@@KYRGarage I just got the Turbosmart shortie not the dual port one so it doesn't add any noise really. I got it mainly because I didn't want the original to fail under more boost from a Hilton tune. The K&N or IPD air filter gives enough of a blow off noise for me. The IPD filter is actually better and louder than the K&N. You might have to hit the MAF with MAF cleaner every once in a while though.
@@willriley1619 Yeah I have a kn filter on the elevate intake, and it already makes a lot of blow off noise for me. I don't want it to get louder tbh, but the shortie sounds like a good idea since you are right. Just taking out potential failures
Hey did eightfab downpipe throw u a check engine p0420
Great vid. Thinking about doing the same upgrade on my C30 too. Heat soak is NOTICEABLY bad in triple degree temps. Ended up with a bad overheat and a blown head gasket this summer. Wonder if the intercooler would've helped. Thanks for sharing your experience!
Question: Can you just change your Intercooler without replacing or modding the other vents... Like your intake vent etc.
it's completely in the way, you can cut it out and try to fit it well, but ur gunna cut most of it anyways. Also airflow wise since its wider and bigger (pause) its gunna gulp all that air
Would the do88 intercooler fit on the 1.6 D2 c30 as looking for an upgraded one for my c30 thanks
Just bought one of these and I'm concerned about the heat soak so I'm thinking this will help with reliability on the c30 to really make it a daily driver
That is a awesome thing to do too. These stock intercoolers are mighty thin. Definitely do it!! thanks for watching the vid
@@KYRGarage I'm also looking at doing a upgrade to the engine oil cooler block. I see people saying to take the ones off a ford focus RS engine that are bigger and it will just bolt on to the volvo T5 engine
@@christianhudspeth3338 yes I believe that is true, im not 100% sure on that since I havent been looking into it that much. I did see that airtec makes a full oil cooler kit that seems very attractive to me!!!
Hello did you have to use a saw to cut any trim from the front bumper whilst installing the intercooler
I used the saw to cut out the duct yes. I could not access it so I cut it off lmfao. But its useless when u put the intercooler in anyways
@@KYRGarage thanks for your reply I’m going to tackle this DIY next Monday and was going over DO88 instruction sheet and realize they did it on a V50 not a C30 so the bumper design is different and the tab trimmed step doesn’t apply to post face lift C30
So cute
Looking to do this to my v50r soon!
Some idea about c 30
Okay
May I hav your instagram plz
I need soma idea tanks
May i have your instagram plz