Jeep Wrangler JK Teraflex 1.5 in. Spacer Leveling Kit Review & Install
Вставка
- Опубліковано 3 сер 2019
- Shop This Teraflex 1.5 in. Spacer Leveling Kit: terrain.jp/2WN9d0X
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
Teraflex offers this 2 inch front, and 1 inch rear boost/leveling kit for your Wrangler JK. This kit, which can be used with up to a 305/65R18 or 305/70R17 tires, gives your Jeep improved street handling, and full suspension articulation on the trail. terrain.jp/2WN9d0X
Item J100287
MPN# 1155200
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/+extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterrain.com - Авто та транспорт
Shop This Teraflex 1.5 in. Spacer Leveling Kit: terrain.jp/2WN9d0X
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
Nice simple install, thanks. I'll add that it never hurts to put some never-seize on the old bracket bolts you reinstall.
Yes sir! Thank you for watching!
Do I need to adjust the bump stops or shocks?
I am looking into getting this setup. I think I am due for shocks as well. What shocks do you recommend thar will fit this set up well? Keep in mind that I only go on light trials once or twice a year.
I put this kit on my 2015 JK over the weeknd. After i was done i took it for a drive and all was good. noticed the steering wheel was off a little bit so i corrected that. The next morning, i was driving to work and when i made a left and right turn the Traction control little flickered and it did not do that before i corrected the steering wheel. would that have caused that or did i mess something up? I am worried. This was my first big project i have done by my self.
thanks
I noticed that you didn't need to heat up the bolts on this example...
i have a jeep sahara and want to put the factory rubicon wheels on it. Will this kit clear those wheels?
Can I use fox 2.0 shocks with this kit?
you couldve used the post jacks to lift the axle
These spacers are compatible with Falcón shocks 2.1 height 1.5 to 2.5 ?
My jk is stock And I just bought this kind of shock absorbers

Will this fit a right hand drive Jeep Wrangler 2016?
Thx for the video. No way I'm doing this without a lift on the ground lol. I'll be getting it installed.
Removing the rear endlinks from the bottom bolt is way easier. For me at least!
Should also get an adjustable track bar with the spacers?
Generally, adjustable track bars only become needed once you lift your Jeep higher than 2 inches. This 1.5" kit won't put your front axle out of alignment enough to really *need* it. If your stock track bar bushings are worn and you're looking to replace it though, an adjustable one would be great to pair with a kit like this. Hope this helps! -Zach
I want to get your 2.5in lift kit with shocks and I want to get rid of factory front rake. Can I just add these without any other parts than the ones that come with your 2.5 kit? Also is there just a spacer to lift the front and not the rear? Thank you in advance.
Hey, Jordan! Do you have an item number for the specific kit that you're looking at? That can help me make a better recommendation for you here. -Zach
So I bought Skyjacker Black Mac shocks that have a “lift” of 0-1 inches. Can I use these shocks with this leveling kit to run larger tires? I know you said in the video that you use the factory coil and shock. Thanks for the help!
You absolutely can! Technically you would really want a shock that works for 1.5" of lift instead of 0-1", but since its so close - it should work just fine! -Zach
@@extremeterrain aweosme thank you! Is there an extended or collapsed length that I should look at? Or is it all about the lift height?
It really comes down to shock length and lift height, you want to make sure they match up properly. I'd recommend reaching out to Skyjacker's Tech Team to see if they can give you a little extra insight when it comes to their specific shocks if you're looking for more information. 😁 -Zach
Does the Jeep need an all wheels alignment after this installs?
I'd highly recommend getting an alignment whenever modifying your suspension, just in case. -Zach
Looking to put this on a JKU Rubicon with 35" tires. Would that work well? Want it for daily driver but live in rural midwest KS and would like to be able to deal with snow and some country driving. No rock crawling etc.
35s on a 1.5" leveling kit would be a pretty tight fit without some kind of aftermarket or higher clearance fender flares. If you only want to lift your Jeep 1.5", I'd recommend sticking to a 33" tire. If you're dead set on 35s, you'll want to look into a 2.5" lift kit at the very least. -Zach
@ExtremeTerrain.com contradicts their self on the issue. In this video ua-cam.com/video/M3O0SXeZ9Kw/v-deo.html they state that you can run 35" tires with no lift for on road driving, so with the added 1.5" of lift you should be good. You may need wheels or spacers if you go with a wide tire to give clearance on the inside while turning. I agree if you want to flex you need a 2.5" + lift.
Is it possible to run a 2.5 in lift under the leveling kit? Looks like my Jeeps previous owners installed it and I didn’t realize.
Definitely! Plenty of people put spacers on their Jeep after installing a lift in order to tune out any rake that may be left after lifting, or just to get a little height back after putting on heavy bumpers and accessories. The included sway bar links probably won't be long enough if you plan on installing something like this with lift springs, but the spacers will work just fine. -Zach
ExtremeTerrain.com thanks m8
Do I need to install the sway bar links if I put one spacer in the front with 33 inch tires on my JK rubi?
You would still need those extended sway-bar links in the front of your Jeep. -Zach
ExtremeTerrain.com thanks for the info
2015 JKUR. Keeping my stock wheels and 32” tires. 2 questions about this. Will my electronic sway bar disconnect button still work with this kit? Second, I am keeping my stock wheels and tires. Can I just mount them up the same after I install the pucks, and not need any wheel spacers?
This leveling kit will absolutely work with the electronic swaybar disconnect system AND your stock wheels and tires! Take a look at your electronic swaybar disconnect system behind the bumper when you get a chance, its pretty interesting. The swaybar itself is what disconnects, not the links themselves. -Zach
Do you need an alignment after installing them.
We always recommend getting an alignment after modifying your suspension! -Zach
Extreme terrain does not, will not not stand behind any product they sell. They say it is not their problem to everything its the manufacturer. Their goal is to resist refunds or replace product at all cost. I have four wranglers in my family. They have drove us crazy. Do yourself a favor a purchase from Quadratec. Very professional and helpful.
I have a different experience. Returns have not been a problem and they even paid most of the return shipping.
What fenders are are this jk?
Those are Smittybilt's XRC Front and Rear Flux Fender Flares! -Zach
Will you be able to run 33 with out rubbing in mild off roading
Yes you will. I have a 1.75 inch spacer lift and I have 33s installed. They are Wrangler DuraTrac Light Truck 285 70 R17
Absolutely! This leveling kit will be perfect for 33s and some light off-roading. I would only be worried about clearance if you were looking at matching this kit with some 35s, things would be pretty tight in that case. -Zach
Why did you guys choose to have those funky fenders on so that the 90 percent of us who have factory fenders won’t even be able to tell how much lift it will add.
You guys are like "yeah it's easy you can do it with basic hand tools" then proceed to use a 5 thousand dollar lift
It's a lot easier to film with the Jeep on a lift compared to using floor jacks, we're just trying to give you the best angles here. 😁 -Zach
@@extremeterrain But don't you need a lift to get the axle that far down or can I do that with floor jacks
@@TonyF1MMA The whole point of lowering the axle away from the Jeep body is to put enough distance so that you can get those coil springs out and that's really it. Another option if you're not having much luck getting that separation with just jack stands and a floor jack, is that you can try getting a coil compressor and using that to squeeze the coils so that you pull them out without needing a lot of room. They're not expensive, though be careful with them, they will want to murder you if you don't pay attention to what you're doing and compress both sides evenly and only for as long as you absolutely need.
@@TonyF1MMA jack stands will give you enough room for this.