INSTALLING LED SYMPHONY AMBIENT LIGHTS TO MY BMW M4 F82 /FULL DIY/CUTTING/ WIRING/ INSTALL

Поділитися
Вставка

КОМЕНТАРІ • 57

  • @Schnitzer325ci
    @Schnitzer325ci 2 місяці тому +2

    Credit on the installation. I considered this for a moment and then realised the prestige just dropped off the car. Each to their own, I suppose.

  • @victorj2307
    @victorj2307 Рік тому +21

    More RGB = More FPS, I mean... more HPs 😆

  • @ata9014
    @ata9014 10 днів тому

    Looks good, but you haven't really shown connections. How many light strips/ light modules can go onto each controller? Lets say I wanted to run down the centre console. How many units, in total, can I connect to the main controller?

  • @mshaheen6767
    @mshaheen6767 11 місяців тому +2

    Hi mate I’ve go this same kit for a Mercedes c class was just wondering if you know what colour cable to connect to thanks

  • @badralkowni6428
    @badralkowni6428 2 місяці тому

    How did you push it through the door panel. You said you drilled something but I’m having trouble getting it to go through.

  • @chevyboiii2115
    @chevyboiii2115 4 місяці тому

    The wiring in the door tapped so i wouldn't have to connect to the door module all the way to the main module? Where can i order?

  • @zhe973
    @zhe973 6 місяців тому +1

    Hello, have you had any problems since your installation?
    because I did it without any problem for 1 year then nothing more overnight. I first blamed the main box then after a direct test on the battery it works. I took the energy from the same place as you after testing with a multimeter I got 6 or 7 volts. I checked the fuses too and need to check the EMF box now.
    I bought a new kit and plan to take the power to the main box on the hazard lights.

  • @garbinsgarage
    @garbinsgarage Рік тому +1

    Can you link it in the description?

  • @arkmaniac2374
    @arkmaniac2374 Рік тому +3

    Could you tell me exactly how you wired you main controller and sub controllers. What wire colors do I need to connect the red to and the black to. I have a 2015 435i f33 convertible. Do I need to disconnect my battery before I tried to connect these? I didn't actually see you do any wiring in the video , you mentioned how you did it but I'm still a little confused. Thanks and great video you are giving my the confidence to try and do this!

    • @MREVREN
      @MREVREN  Рік тому +3

      What ever colour wire you pick to tap into out of the white with blue strips or white with orange strip has to match on all controllers so red wire from controller to white with blue strip and black wire from controller to brown. I didn’t disconnect my battery, how ever I did go into idrive and turn off ambient lights and I switched my auto lights to off positions.

  • @OS_20
    @OS_20 9 місяців тому +1

    Hey bro
    How is the quality after 6 months now is there any difference in the color or damage or something or all good

  • @392cartier2
    @392cartier2 3 місяці тому

    I have an issue where my door lights are stuck on yellow and won’t react when I changed them In the app can you please help?

  • @thomasp2963
    @thomasp2963 3 місяці тому

    Anyone else havig issues using the "mic" feature on the app? When I try to use that feature, my aftermarket subwoofer stops working, but the subwoofer works with all the other features on the app.

  • @j2949
    @j2949 8 місяців тому +4

    How did you test the lights before install?

  • @florencetimes2893
    @florencetimes2893 Рік тому +1

    Hi dear, i have the same setup, everything was ok unless i downloaded the app and now i am repenting, have you encountred an issue where the big strips are only glowing half, first i thought the strip might be damaged so i connected the other one but the same, do you know where to fiddle in the app??? And do you know how to reset defaults?

    • @MREVREN
      @MREVREN  Рік тому

      It’s probably a software issue. There was a software problem with mine that I showed and discussed in this video linked below
      m.ua-cam.com/video/m8WQDzdfBaA/v-deo.html

  • @johnfarbrother968
    @johnfarbrother968 Рік тому +2

    Great vid fella & it looks amazing. Did you disconnect the battery before tapping into the wires?

    • @MREVREN
      @MREVREN  Рік тому +3

      Thank you. No I didn’t but, I did turn the ambient lights off from the idrive menu.

  • @user-oq4bo1bn4h
    @user-oq4bo1bn4h 4 місяці тому

    What’s the name of the app ? Can anyone please tell me

  • @davidsmith7208
    @davidsmith7208 7 місяців тому +2

    I've had some experience with these and had a lot of trouble getting them to stay, even with double stick tape. I noticed at 23:12 your door strip was falling. I'm wondering what your solution was, because I'm thinking about jumping in again with a fresh kit, and i don't want the same fights I had last time.

    • @MREVREN
      @MREVREN  7 місяців тому

      I’ve used 3m tape with spacers jamming them in every 10cm, they are secure now

    • @davidsmith7208
      @davidsmith7208 6 місяців тому

      @@MREVREN Which 3m double stick tape would you recommend, I saw there are several. Also, what would you suggest to use as a shim/spacer? I love the looks of these but they are an unbelievable pain at times, depending on the shape you're working with.

  • @JoonBalloon
    @JoonBalloon 10 місяців тому +1

    I downloaded the app but it doesn’t control the light settings. Is there something I’m missing? Do u have a vid showing app connection only?

  • @sciroccomods
    @sciroccomods Рік тому +1

    Hi, with this kit can you set the door pockets to say blue at 100% brightness and have the dash stripss to say red at 50% brightness all at the same time, if you could reply asap that would be appreciated as i need to order asap as im going away in the car in 2w, thank you.

    • @MREVREN
      @MREVREN  Рік тому

      Yes

    • @sciroccomods
      @sciroccomods Рік тому

      @MREVREN awesome. just ordered. i installed one the other day. looks mint but its all one colour at a time. strips i want low but door pockets hi. thanks very much for the speedy reply. ill be fitting one to my brothers m3 comp soon too. 🫡

    • @BMWoverAnything
      @BMWoverAnything 9 місяців тому +1

      all you had to say was thanks lol, you internet dudes odd as hell 😂
      Highly doubt him or anyone reading your comment cares about you installing the same for your “bros m3” 😂😂
      Come on now dawg

  • @DaleDrury
    @DaleDrury 3 місяці тому

    I have a f30 320d efficient dynamics i tapped into my standard ambient lighting and it stays on for 5 seconds then goes off dose this 5 time them i lose all my ambient lighting till i turn my car off and on and dose it again. Any ideas on this ?? (Black to brown red to red and white

    • @AstrixLIVE
      @AstrixLIVE 22 години тому

      Brown wire only enables in sport plus i think

  • @vladavramescu5742
    @vladavramescu5742 Рік тому +1

    where did you get the current for the modules in the door?

    • @MREVREN
      @MREVREN  Рік тому

      From factory ambient light

  • @shellbullet0x
    @shellbullet0x 8 місяців тому +1

    How do you cut these. Is there a mark.

    • @MREVREN
      @MREVREN  8 місяців тому

      You can feel it cut just after led

  • @zorankaragic5179
    @zorankaragic5179 11 місяців тому

    How did you stick the bead on the dash is it double sided sticky?

    • @MREVREN
      @MREVREN  11 місяців тому +1

      Yes but 3m, the one they provide let’s go in the summer when interior heats up

    • @zorankaragic5179
      @zorankaragic5179 11 місяців тому

      Thanks, I’m connect door card now I have a red black and yellow cable which should go into which?

    • @minulachis
      @minulachis 8 місяців тому

      @@MREVREN Which one from 3M? I am trying to find one that is pretty thin so it doesn't show

  • @tomasexteriors
    @tomasexteriors 9 місяців тому

    Double side tape just not gonna last.update it now what's the feedback? On summer it be falling down🎉

  • @shahx7824
    @shahx7824 11 місяців тому +1

    What app are you using to control the lighta

    • @MREVREN
      @MREVREN  11 місяців тому

      Led lamp

  • @user-xp5kz2gd4q
    @user-xp5kz2gd4q 9 місяців тому

    Hello can you cut this lights

  • @alexsound8014
    @alexsound8014 Рік тому

    what name app?

  • @cb8491
    @cb8491 8 місяців тому +2

    How do you stop that tacky RGB test sequence at the beginning. Looks terrible doing that at the beginning every time you start the car, which is a shame as it will never look OEM doing that.

    • @MREVREN
      @MREVREN  8 місяців тому

      You can buy one without that feature

    • @cb8491
      @cb8491 8 місяців тому +1

      @@MREVREN do you know which ones?

    • @MREVREN
      @MREVREN  8 місяців тому +1

      Should be the ones that don’t state they are FULL COLOUR, Should be the ones that just state RGB

    • @cb8491
      @cb8491 8 місяців тому

      ​@@MREVRENthanks mate 👌

    • @StevesLifeVLOG
      @StevesLifeVLOG 5 місяців тому +1

      Can disable via app... It's called welcome light

  • @joshuaking6004
    @joshuaking6004 7 місяців тому +1

    That is the most clapped f82 😂😭

    • @itsm3t1
      @itsm3t1 6 місяців тому +5

      How is your corsa running mate?! 😄