How to setup the Gan 11 M Pro.
Вставка
- Опубліковано 3 лип 2024
- This is how I setup my Gan 11 m pro, this cube is very customizable so this will work with a lot of turning styles then just how I turn. if you want a slower Gan 11 (which kind of defeats the purpose of getting one) then you can slow it down by changing the spring compression. :D
2x2 Ortega method: • How to solve the 2x2 u...
3x3 cfop method: • Cfop: beginners cross ...
• CFOP #2: Beginner F2L
• CFOP #3: 2 LOOK BEGINN...
• CFOP: 2 LOOK BEGINNER PLL
4x4 yau method: • How To Solve The 4x4 R...
3,2,3 edge pairing: • How To Do 3,2,3 Edge P...
reduction method for big cubes (5x5, 6x6, 7x7): • How to do the Reductio...
beginner 2x2: • how to solve the 2x2 r...
beginner 3x3: • How to solve the Rubik...
beginner 4x4: • How To Solve The 4x4 R...
beginner 5x5: • How to Solve The 5x5 r...
beginner 6x6: • How To Solve The 6x6 r...
beginner 7x7: • How to Solve the 7x7 F...
i recommend to buy these cubes if you have bad ones as these are very cheap and very good: YJ MGC 2x2, RS3M 2020 3x3, YJ MGC 4x4, 5x5, 6x6 and 7x7.
2x2 setup tutorial: • How to setup Your MGC ...
3x3 setup tutorial: • How to setup your spee...
4x4 setup tutorial: • How to make your 4x4 A...
5x5 setup tutorial: • How to setup your 5x5.
6x6 setup tutorial: • How to setup the MGC 6x6.
7x7 setup tutorial: • How to Setup Your MGC ...
Don’t have gan 11m pro but I enjoy watching it because it has quality good job keep up
thanks man :D
Helped a lot!! Thanks 👍
I have no idea how you have only 641 subscribers i have instantly subscribed i also don't know why this didn't have more likes, tbh i think this video is far more informative than the speed cube shop vid anyway, keep up the good work and you'll get 1k by the end of may!
Thanks for the support :)
@@leeleecuber your welcome, you deserve it!! 👍😉
@@fabianreis3946 :D
Thank you so much man. Literally the instructions where Chinese! Very helpful
Hope u can read Chinese lmao :) ur welcome
thanks bro this really helped me
No problemo glad I could help u :)
Thanks for sharing ur knowledge
i hope it helps :D
Omg thank you, I thought I ruined mine, I undid everything followed this, (I like a looser cube) and everything was perfect but I would say this is more a loose cube tutorial and doesn’t work as well for tight settings
Glad I could help :)
1:52 "i want to replace deez nuts because i like...." xD
LMAO
This might sound like a silly question. Whats the best way to ensure your towel is reusable after cleaning your cube? For instance do you just clean the towel with water?
Put in the washing machine lol
Thanks a lot i just got the gan 22m pro maglev uv coated
Ur so funny that I didn’t laugh
@@leeleecuber lol same lol here lol i lol didn't lol laugh lol at lol all lol
@@speedcuberwithnicevedios :|
@@leeleecuber yeah i agreee
@@speedcuberwithnicevedios bruh
What is the best setting for good corner cutting ?
ill have a review out either today or tomorrow :D
спасибо .
how r u liking the gan 11 m pro so far? and how is the ur coating on this cube?
I’ll have a review on it soon
@@leeleecuber thanks 🙏🏽
@@stormzyyy6881 :D
do you think, Weight 5, Stardust and Lunar is a good setup?
no it will be way too fast. i like Martian in my cube because it doesn't just make it fast it also makes the cube feel like something. but stardust is a little too fast, if u don't have Martian use only lunar and weight 5 :D
thanks bro, 🙌🏽
@@stormzyyy6881 np :D
Yo bro you have discord?
Also this tutorial worked great! I did everything exactly! I think I just put too much weight 5 and Martian and it’s a tang slow but maybe I have to break it in heaps!
Glad I was able to help :)
hey how much weight 5 did u put on spring, did u cover the whole spring?
yes i did and all you need is enough to eliminate spring noise, if it still has spring noise just add more :D
thanks so much, i love your content :)
@@stormzyyy6881 :D
@@leeleecuber one more question, what corner magnets u have on?, triangle or hexagon?
@@stormzyyy6881 i cant really feel a difference so I'm on the triangle :D
yooo what are your settings?What makes the cube the fastest I mean setting
my settings currently are changed from when i made this video. now the clear is on 4 and the blue is on 1 and magnets on the middle setting for me. the fastest possible settings on this cube is magnet setting one blue thing on 4 and clear thing on 1. hope that helps :D
Bro i tried every thing u tell but now my gan is popping all the time😢 what did u do to my cube
U can try tightening the cube, and make sure to turn with more control :)
Is the cube fast in the box?
yes lmao :D
hey do you think gan 11 better than gan 12
i dont have the gan 12 but i might get it considering everyone asks me about it.
Will mystic and dnm be fine instead of lunar and martian
Yes that should be great!
@@leeleecuber thanks dude 😃
@@agrimgupta605 np :)
Will silk an dnm be fine instead of lunar and Martian
Yes they will, I will be making a vid on what lubes are required for making a cube good :D
yeah i used silk and dmn and it actually turned out great.
i feel like the UV coating is too slippery hbu?
I will have a review very soon maybe tomorrow :D
Bro, can I ask you something?
I have a gan 11 m pro but inside the pieces are really dirty and I don't know how to clean inside the pieces.
Pls help me.
BTW great vid
I have many videos on setup tutorials. My rs3m 2020 vid shows how I clean my cubes. If you want to see more setups I have a playlist just go look at the playlist. I hope it helps :)
@@leeleecuber thanks
@@ThomasCrossley0912 np :D
If my cube is brand new then do i also need to clean it up?
only clean it if its dirty, if its out of the box its probably not dirty :D
@@leeleecuber thx
@@alimoviah7831 your welcome brother :)
People complain that gan is overpriced and that the 11 m pro locks up, but I got the uv coated for 48 dollars and it's the best cube I've ever felt, people are stupid smh.
It does lockup on loose settings but it is still really good.
@@leeleecuber Then just don't use the loose settings. (great vid btw!)
@@sebastianmorber116 yep :) thanks
What cube lubes should I use? I want it to feel soft and smooth (almost gummy) but still fast and controllable.
Is Silk and Mystic a good combo?
Or is DNM and Silk a better one?
Silk and mystic is probably better for the feel u want
@@leeleecuber thank you so much, I tried it and it feels great :)
I got the Gan 11 m pro but I’m confused about the GES knuts so 😂
Edit: córner cutting is not good 😅
u need to use lube and for better corner cutting you can use the looser ges settings :D
@@leeleecuber What settings do u using?
@@hoangthong2040 hmmm
do u need to lube one edge or all edges (feel free to laugh at me i'm a complete noob when it comes to lubing!)
Just one, it will spread around the cube when you break it in :D
Ok thx
@@fabianreis3946 np :)
Is the gan 11 m pro ur new main?
we will see in my review :D
I just got the Gann 11m pro guys
What setting do you recommend?
Blue:???
Clear:?????
I love my cube Fast smooth and controllable
Currently I have this
Blue:1
Clear:High click then 1 click
My setting kind of feels good to me but pls share
I mean that’s totally a matter of preference. Just try a few combinations and pick ur favourite:)
@@leeleecuber oh ok! Really helpful 😁 I'm gonna sub
Bro is averaging 35-40 sec in just 4 months good?
@@NightCod-f5g yea that’s great :)
@@leeleecuber bro I have a question
What is your setup on Gan 11m pro?
I'm currently
Light blue:1
Clear :3
@@NightCod-f5g mine is blue on 2 clear on 4
4:24 deez nuts lol
Lol
Coll cube
Hmmm
Why cant mine sound like that😰😰
Just do everything I said and it will
Yooo! ITS MEEE
So I am kind of stupid… my gan settings are… 😔
Level 1 magnets
Hexagon magnet pole thing
Level 1 spring compression
Light blue nuts
Stardust lube
😔😔😔
It’s time to change it…
Here’s all my lubes:
Weight 1, weight 5, stardust, Martian, lunar, solar and nebula. I don’t have lunar so which is best to replace it?
If u have comet u can use that :)
@@leeleecuber I just bought lunar!
@@Desticals_COBRAKAINEVERDIES great :)
Also 7x7 update: my fastest time is 20 min :(
@@Desticals_COBRAKAINEVERDIES Dw bro u will get there
Turning sounds like keyboard switch
LOL i agree
good thing or bad thing ? :D
@@leeleecuber I think good because it seem very satisfy :D
@@hauphuc1601 ayo :D
Bro pls tell me your setting 😯💨
I changed it since this vid. Currently for the blue I have it on setting 1 and the springs on setting 4
@@leeleecuber Oke tks
@@hoangthong2040 no problemo
@@leeleecuber And the magnet setting?
@@hoangthong2040 middle setting.
Pls watch the vid careful before you ask ;D