Bobcat Skid Steer Engine Locks Up, What Happened and Why
Вставка
- Опубліковано 20 січ 2024
- Bobcat T740 skid steer engine spun a rod bearing and the engine needs to be replaced.
Our new Website www.southvalleyequipment.com/
Tetrad Group www.4tetradgroup.com - Авто та транспорт
I was in this situation a year ago. I found a company out in conroe texas called Sheely supply llc. He rebuilds industrial engines and equipment engines. Specializes in doosans mostly. Re rebuilt my d34p for about 15k. My block spun 2 main bearings and 2 rod bearings. They line bored the block to bring it back to spec as you cannot over size those bearings. I highly recommend that company as a rebuilder of doosan motors. Hes one of the few people in the states that has the knowledge and experience to rebuild them.
Appreciate your videos! Recently purchased a T740 with 3k hours. I'm grateful for you sharing your knowledge.
Very impressed with the amount of knowledge you have on these machines.
Thank You Sir for your time & generosity to share your priceless wealth of knowledge & experience - Very kind of you & Thank You Again.
Wow, $26k for an engine. That old engine appeared to be in need of more frequent oil changes.
That's nothing. FPT Cursor 12 engines are about $90k. John Deere 6136 engines are over $100K.
Yea, thats crazy.
The question is why did bobcat stop using Kubota engines? Was it because Doosan purchased Bobcat? Kubota engines were damn good. Our S570, with the Doosan engine, already is showing a rusty fuel rail..it sits in the shop. Our T590 with the Kubota engine..still a pretty blue.
Really due to Doosan purchasing Bobcat as well as emissions standards.
Emissions bro. Save the planet bro. Global climate change lies
Rust inside of a fuel rail?
@@crankshaft1053 no, the outside is rusting. Especially where the hard lines thread in.
No these Doosan engines do get rust inside of the rails. We see it all the time due to not draining the water in the fuel water separator often enough. Rust gets in the low pressure pump and in the rail.
Wow things are getting pricey.....great tutorial on all the sensors and what to look for. Thanks for posting!!
Useful info. Thanks for sharing.
Thanks for the information👍
Parts prices are crazy … othe commenter is so correct about small operators being priced out . We just aren’t seeing the margins to be able to afford repairs.
I'd love to pick up a non runner like this and shoehorn an older engine in. I wonder what are they selling for.
$26K for a new 4-cylinder?! Boy, they know when they got the upper hand! That should leave the rebuild market plenty of room to operate. I would guess that skid steers are not really well maintained by most users unless they are a major portion of their equipment fleet.
Bobcat is absolute shit. They have no problem fleecing pockets when they have a person bent over. Then you have this clown that claims that 26k is because of the "precision". He should be saying 26k because it is complete minus the ECM. That does lend a bit of credibility... but still a steep premium.
Would love to see a video going over tools to make a new dealer techs life easier new to hydraulics and diesels
We can do that!
I have rebuilt a coulple of d34 and d24. Hardest part was getting parts. But I found a good dealer in California. Depending on letters on block. They can use 3 different bearings.
Can't you get a shortblock? $26k can put a small operator like me out of business. No wonder Sunbelt gets rid of machines before they need repairs like this. I've got a Takeuchi TL8 (tier four) and a BC S300 (pre emissions). Same basic engine. Getting rid of the Tak. Nothing but problems with the emission/fuel system. Can't afford downtime and outside repairs. The BC has nearly three times the hours and never lets me down. Thank the government for the added expense and frustration of operating these modern machine and taking away the joy of ownership. BTW, I will replace the Tak with a pre emissions Tak and proactively spend the money toward keeping it in reliable order. Most of the work I can do myself without depending on proprietary diagnostic equipment and stupidly expensive OEM parts. Even as things get worse I intend to maintain control of my equipment. When that's no longer possible I'll retire or find another occupation.
yeah I'm surprised by that too. Bare block is $4500, short block is $11700. I understand wanting to warranty your product, but it seems it would have been worth the labor reuse the other components. Reman fuel pumps run about $1000-1500, reman turbos run about $1000 if you wanted to be safe and replace those due to oil contamination. Hypothetically the oil filter should catch much of the contamination.
core on a brand new engine never heard of that
Hi, thanks for sharing your experience. What's your opinion one the D24 engine?
How many hours were on the engine?
What tracked models do you find the most reliable?
The R series stuff with alot of wiring problems turns me off.
very informative video , thank you .
so if the rod bearings were gone bad , wouldnt it show low oil pressure ,
if oil pressure gauge plugged into oil gallery ? (if its accessible)
I guess you drained the oil out first and seen the metal.
It didn't throw an oil pressure code but I'm sure if we ran it any longer it would've. But like you said all we did was pull it in and check the oil and found the glitter bomb in the pan
$26k for the engine alone? Or is that labor too? What’s the breakdown? That seems really high for such a tiny engine.
So from a reliability, maintenance cost and ease of maintenance point of view, what is the best pre emissions bobcat with high flow?
Question I have a 2016 s650 that doesn’t throw a code but at full idle it starts to idle up and down and throw black smoke and make a knock sound but when I turn down the idle to about 2000 rpms and it stops doing it and can continue working . Could it be a fuel problem ? Or is it something major I do have a video
The older models with Kubota engines seemed to be pretty reliable. Not too sure about these Korean models.
Run anything but Doosan.
$26k ... 1.21 Giggawatts!! Great Scott what are they thinking?! I've seen guys on youtube swap out the doosan for a V8 or Harbor Freight Predator engine. Would be nice to know what kind of hours are on these machines when they fail. I heard that the 'useful life' of the Kubota was around 5k hours. Don't know what the Doosan is. Was this a SunBelt rental machine that was sold off to a customer, or was this a sun belt machine that they were trying to keep running in their own fleet? Surprised that 'accelerometer' sensor didn't detect that atomized bearing. Looked like "FerroFluid" in the bottom of that oil pan.
!!!!!Im sure they didnt mi d doing all the feul system work and sending a bill when it needed an engine
What was causing it to not run right low oil pressure, knock senser messing with fueling timing. You said it would run but kept dying. But you drove it off the trailer and into the shop. Should there have been a code for it not running right? Does it have hydraulic lifters which were not being pumped up due to low oil pressure, which would not let it breath correctly. You said it ran but did not sound right. Let us know about this issue. 🧐
You think the first mechanic shop would cut the oil filter open first b4 dropping thousands at a fuel system. When $20 oil filter is full of metal, well you found the problem, it f'ed.
How do I identify which engine is in my machine?
Great info by the way.
You can use your machines serial number to look up what motor is in it. What machine do you have?
Look at the valve cover. Usually has engine info on it.
Are these engines just junk? Was it run out of oil to cause that or just defect from factory?
No doosan is a great engine, been building engines for 50 years
I traded for an 853 with the isuzu engine that has the same issue.
Why did a spun rod brg make it not start and run right?🧐🤓
Spun bearing eventually broke the connection rod.
Brady, how does one get in touch with you? I’m in Montana also. Lost our BobCat Dealer where I live.
4tetradgroup@gmail.com
Parts cannon
Do you ever get bobcat tractors to work on?
We both worked on them all the time when we worked at the dealership
Too bad they dont have a conversion kit to swap out with a pre emmision kubota engine
Right.. because emissions caused this how?
Nobody mentioned anything about emmisions causing this did they?
They making it easy to get engines because they know they blow up
Doosan is a great engine, been building for 50 years. Owner error I am sure
So should a person steer clear of bobcat.
Not at all!
26k for a new engine? That a total ripped off.
No oil in engine